EDCELLEDCELL
EDCELL FAMILY ARCHIVE

EDCELL Quirky Ruler Slider: Nine Editions, Scale and Travel

The reverse of each launch body carries a row of recesses.

TRB Creation · 2026-11-21

Family facts
Studio EDCELL
Photographed configurations 9
Parts and anatomy Spare kit and guide
Host materials PEI and stainless steel, Titanium and brass, Zirconium and stainless steel, G10 and stainless steel

EDCELL and ROGUE introduced the Quirky Ruler in May 2025. The first bodies were PEI and titanium. The Shanghai show added the Tai Zi Hotel inscription to the titanium model. Blackened zirconium with a steel guide followed in October, then five G10 colors in April 2026.

How the editions were identified

EDCELL studio announcements, named studio-shop options and individual TRB specimens.

FAMILY ARCHIVE

Editions & configurations

9 complete-configuration records

The reverse of each launch body carries a row of recesses.

The two launch materialsBrowse group2 configuration recordsTranslucent PEI uses steel hardware. Titanium uses brass.
Shanghai inscription and blackened zirconiumBrowse group2 configuration recordsThe Shanghai lettering and the blackened case belong to separate releases.
Five G10 bodies with stainless steelBrowse group5 configuration recordsThe studio offered 199 per color as named choices.
TRB WIKI VERIFIED SPECIFICATION

Documented points

Scale and mechanical travel

Support the grooved body and rest a thumb on the moving section.

Slide along the long edge. Each click advances the carrier by 2 mm.

Return along the guide. The magnets assist near closure.

01

How the movement feels

Each detent advances the scale by 2 mm. Twenty steps give 40 mm of travel. Springs and balls produce the clicks, while magnets help the slider close and return. The measuring range is 6 cm closed, 10 cm extended and 4 cm between the caliper jaws.

Support the grooved body and rest a thumb on the moving section.

Scale and mechanical travelScale and mechanical travelExterior detail · not to scaleHold the bodyFollow the scaleReturn to closed

Support the grooved body and rest a thumb on the moving section.

Scale and mechanical travel

  1. Support the grooved body and rest a thumb on the moving section.
  2. Slide along the long edge. Each click advances the carrier by 2 mm.
  3. Return along the guide. The magnets assist near closure.
02

Identifying the editions

EDCELL and ROGUE introduced the Quirky Ruler in May 2025. The first bodies were PEI and titanium. The Shanghai show added the Tai Zi Hotel inscription to the titanium model. Blackened zirconium with a steel guide followed in October, then five G10 colors in April 2026.

An amber translucent body shows the hardware beneath the silver steel strip.

Look for a blue grooved reverse and the two maker marks.

03

Reading an accessory listing

Hide details ▴Show details ▾

Loose parts and fitted components are pictured separately.

04

Choosing editions to compare

Compare body material and finish against the individual photographs.

The two launch materials

Translucent PEI uses steel hardware. Titanium uses brass.

Shanghai inscription and blackened zirconium

The Shanghai lettering and the blackened case belong to separate releases.

Five G10 bodies with stainless steel

The studio offered 199 per color as named choices.

05

Sources, roadmap clues & scope boundaries

Hide details ▴Show details ▾

Beyond the verified configurations in this guide, the following clues and cross-family mentions are tracked separately:

  • Collector records:All nine configurations have identified photographs. Body and track material separate the two launch builds. The Shanghai release has its own inscription, and the five G10 bodies were sold by color. The spare kit and exposed guide appear separately.
PARTS & PERIPHERALS ARCHIVE

Accessories and anatomy

2 records

Loose parts and fitted components are pictured separately.

Select an accessory to open its related host record.

Individual records (9 editions)

PEI and stainless steel

The PEI launch build came with one POM ball and spring. The titanium build came with two silicon-nitride balls and springs. An amber translucent body shows the hardware beneath the silver steel strip. Compare with Titanium and brass.

399 units
42 g
70 × 28.5 × 10 mm
PEI and stainless steel
Not published by the studio
The PEI launch build came with one POM ball and spring. The titanium build came with two silicon-nitride balls and springs.
Official announcement & image position

Studio release and matched specimen. · An amber translucent body shows the hardware beneath the silver steel strip.

Studio announcement
Titanium and brass

Shanghai used the same titanium and brass pairing with the Tai Zi Hotel inscription. A gray titanium body frames a brass insert bearing the standard Epimetheus inscription. Compare with Tai Zi Hotel Shanghai edition.

Uncapped, first batch 400
75 g
70 × 28.5 × 10 mm
Titanium and brass
Not published by the studio
Shanghai used the same titanium and brass pairing with the Tai Zi Hotel inscription.
Official announcement & image position

Studio release and matched specimen. · A gray titanium body frames a brass insert bearing the standard Epimetheus inscription.

Studio announcement
Tai Zi Hotel Shanghai edition

Shanghai pairs titanium and brass. The later blackened zirconium release uses a stainless face and guide. Chinese Tai Zi Hotel lettering on the insert identifies the 2025 Shanghai show edition. Compare with Blackened zirconium and steel.

99 units
Not published by the studio
Not published by the studio
Titanium and brass
Not published by the studio
Shanghai pairs titanium and brass. The later blackened zirconium release uses a stainless face and guide.
Official announcement & image position

Studio release and matched specimen. · Chinese Tai Zi Hotel lettering on the insert identifies the 2025 Shanghai show edition.

Studio announcement
Blackened zirconium and steel

The October zirconium model weighs 93 g. The five later colored bodies use G10. A dark stonewashed zirconium case surrounds the bright steel insert. Compare with White G10.

Not published by the studio
93 g
Not published by the studio
Zirconium and stainless steel
Blackened stonewash
The October zirconium model weighs 93 g. The five later colored bodies use G10.
Official announcement & image position

Studio release and matched specimen. · A dark stonewashed zirconium case surrounds the bright steel insert.

Studio announcement
White G10

White and yellow share the steel hardware. The studio sold these body colors as separate options. Look for a white body and silver scale. Compare with Yellow G10.

199 in this color
Not published by the studio
Not published by the studio
G10 and stainless steel
Machining lines and brushing
White and yellow share the steel hardware. The studio sold these body colors as separate options.
Official announcement & image position

Studio release and matched specimen. · Look for a white body and silver scale.

Studio announcement
Yellow G10

Yellow and orange share the steel hardware. The studio sold these body colors as separate options. Look for a yellow frame and silver front strip. Compare with Orange G10.

199 in this color
Not published by the studio
Not published by the studio
G10 and stainless steel
Machining lines and brushing
Yellow and orange share the steel hardware. The studio sold these body colors as separate options.
Official announcement & image position

Studio release and matched specimen. · Look for a yellow frame and silver front strip.

Studio announcement
Orange G10

Orange and green share the steel hardware. The studio sold these body colors as separate options. Look for black scale marks on an orange body. Compare with Green G10.

199 in this color
Not published by the studio
Not published by the studio
G10 and stainless steel
Machining lines and brushing
Orange and green share the steel hardware. The studio sold these body colors as separate options.
Official announcement & image position

Studio release and matched specimen. · Look for black scale marks on an orange body.

Studio announcement
Green G10

Green and blue share the steel hardware. The studio sold these body colors as separate options. Look for a green body and long silver insert. Compare with Blue G10.

199 in this color
Not published by the studio
Not published by the studio
G10 and stainless steel
Machining lines and brushing
Green and blue share the steel hardware. The studio sold these body colors as separate options.
Official announcement & image position

Studio release and matched specimen. · Look for a green body and long silver insert.

Studio announcement
Blue G10

Blue and white share the steel hardware. The studio sold these body colors as separate options. Look for a blue grooved reverse and the two maker marks. Compare with PEI and stainless steel.

199 in this color
Not published by the studio
Not published by the studio
G10 and stainless steel
Machining lines and brushing
Blue and white share the steel hardware. The studio sold these body colors as separate options.
Official announcement & image position

Studio release and matched specimen. · Look for a blue grooved reverse and the two maker marks.

Studio announcement

Configuration details

DESIGN THROUGH TIME

Edition records

EDCELL and ROGUE introduced the Quirky Ruler in May 2025. The first bodies were PEI and titanium. The Shanghai show added the Tai Zi Hotel inscription to the titanium model. Blackened zirconium with a steel guide followed in October, then five G10 colors in April 2026.

  1. Quirky Ruler Configuration Matrix9 verified records
    2025-05-10PEI and stainless steel
    2025-05-10Titanium and brass
    2025-05Tai Zi Hotel Shanghai edition
    2025-10-24Blackened zirconium and steel
    STAGE 01

    Public launch

    PEI and titanium bodies went on sale.

  2. Tai Zi Hotel Shanghai editionEnlarge this crop ↗
    STAGE 02

    Shanghai announcement

    The studio announced 99 Tai Zi Hotel pieces.

  3. Blackened zirconium and steelEnlarge this crop ↗
    STAGE 03

    Blackened zirconium release

    Zirconium paired with a stainless face and rail.

  4. White G10Enlarge this crop ↗
    STAGE 04

    Five G10 retail colors

    The studio released five named colors after the show preview.

Choose two to compare

Compare any two verified configurations side by side across standardized fields.

⚡ 1-CLICK COMPARE PRESETSSelect any matchup to launch an instant side-by-side specification comparison

Host specifications side by side

The material and run size refer to the host.

Host specifications side by side
Dimension PEI and stainless steel Edition A Blue G10 Edition B
Material PEI and stainless steel G10 and stainless steel
Finish Not published by the studio Machining lines and brushing
Numbered run 399 units 199 in this color

REQUEST A CONFIGURATION OR PART

Looking for EDCELL Quirky Ruler?

Share the edition, material, or accessory you are looking for, and include a reference photo or serial number if available.

Send a sourcing request ↗

Keep exploring

FREQUENTLY ASKED QUESTIONS

Common questions about EDCELL Quirky Ruler

Does the printed 20 indicate a 20 cm measuring range?

The exaggerated scale is part of the studio’s joke. Its stated physical ranges are 6 cm closed, 10 cm extended and 4 cm in caliper mode.

EDCELL studio announcements, named studio-shop options and individual TRB specimens.

How do the Shanghai 50 and the 199-per-color figure relate?

The April 2026 show announcement reserved 50 for the event in total. The April 28 retail release listed 199 each in white, yellow, orange, green and blue.

EDCELL studio announcements, named studio-shop options and individual TRB specimens.

OFFICIAL ARCHIVE CITATION

Citing this guide

When referencing the configuration records, mass tiers, or identification rules from this page, use the citation format below.

Studio and shop records

TRB Creation, “EDCELL Quirky Ruler Slider: Nine Editions, Scale and Travel”, TRB EDC Wiki, https://trb-creation.com/pages/wiki-edcell-quirky-ruler (Verified 2026-11-21).

Enlarged image

Compare configurations