WM EDCWM EDC
WM EDC FAMILY ARCHIVE

WM EDC Q Mechanical Slider Guide to Launch Finishes and Track Plates

Magnets retain the covers of WM’s Q. Spring-loaded balls running over interchangeable tracks produce the steps beneath the thumb. Both launch builds share that mechanism.

TRB Creation · 2026-11-21

Family facts
Studio WM EDC
Documented hosts 3
Separate accessory records 3
Host materials Zirconium plates and covers, PEEK retaining block, Titanium covers, zirconium plates, PEEK retaining block, Dealer-listed titanium covers, gold-toned middle plate

WM introduced Q in black-and-gold zirconium and purple-and-black titanium on September 5, 2024. Its September 8 notice clarifies the allocation. The first 100 sold out. Of the remaining 300, 200 were allocated to the September 11 group order. The total of 400 covers both launch materials. A dealer SKU and traded specimens document Ink-Splash Titanium; its release date is unconfirmed.

How the editions were identified

WM’s September 5 release and September 8 order notice establish the launch builds. Named dealer and retail records supply finish and component photographs.

FAMILY ARCHIVE

Editions & configurations

3 complete-configuration records

Magnets retain the covers of WM’s Q. Spring-loaded balls running over interchangeable tracks produce the steps beneath the thumb. Both launch builds share that mechanism.

Two studio launch buildsBrowse group2 configuration recordsBoth use a zirconium middle plate and interchangeable tracks, with zirconium or titanium covers.
Ink Splash in dealer recordsBrowse group1 configuration recordsA separately named dealer option can be matched to complete traded specimens.
TRB WIKI VERIFIED SPECIFICATION

Documented points

Purple/black and black/gold launch sliders together

The cover wraps partway around the sides, leaving the middle plate visible at one corner.

The dense plate has closely packed recesses. Flat intervals separate the pockets on the spare track.

WM reserved the opposite face of the middle plate for spare springs and balls.

01

How the movement feels

Magnets retain the partially wrapping covers. As the cover slides, spring-loaded balls meet recesses in the track plate. Closely and widely spaced tracks have different intervals. The opposite face of the middle plate stores spare balls and springs, and the body has a 3 mm lanyard opening.

The cover wraps partway around the sides, leaving the middle plate visible at one corner.

Purple/black and black/gold launch sliders togetherOffset Q cover and middle plateExterior detail · not to scaleIdentify the coverCompare the tracksInspect the storage face

The cover wraps partway around the sides, leaving the middle plate visible at one corner.

Purple/black and black/gold launch sliders together

  1. The cover wraps partway around the sides, leaving the middle plate visible at one corner.
  2. The dense plate has closely packed recesses. Flat intervals separate the pockets on the spare track.
  3. WM reserved the opposite face of the middle plate for spare springs and balls.
02

Identifying the editions

WM introduced Q in black-and-gold zirconium and purple-and-black titanium on September 5, 2024. Its September 8 notice clarifies the allocation. The first 100 sold out. Of the remaining 300, 200 were allocated to the September 11 group order. The total of 400 covers both launch materials. A dealer SKU and traded specimens document Ink-Splash Titanium; its release date is unconfirmed.

A gold-colored corner peeks out from the dark cover. Zigzag engraving crosses the face. The corresponding TRB option is Zirconium.

The complete slider is partly open. Its angular engraving shows between the flecks, with the gold-colored channels and stop visible at the end.

03

Reading an accessory listing

Hide details ▴Show details ▾

Compare the lengthwise pockets on the two track plates to see the difference in spacing. The open middle plate shows the channels beneath the cover.

04

Choosing editions to compare

Compare body material and finish against the individual photographs.

Two studio launch builds

Both use a zirconium middle plate and interchangeable tracks, with zirconium or titanium covers.

Ink Splash in dealer records

A separately named dealer option can be matched to complete traded specimens.

05

Sources, roadmap clues & scope boundaries

Hide details ▴Show details ▾

Beyond the verified configurations in this guide, the following clues and cross-family mentions are tracked separately:

  • Collector records:Identify Q by its rounded profile, double zigzag motif and cutaway corner together. Resin coatings, later engraving and refinishing occur on individual resale pieces. Ink Splash also has a separately named dealer SKU.
PARTS & PERIPHERALS ARCHIVE

Accessories and anatomy

3 records

Compare the lengthwise pockets on the two track plates to see the difference in spacing. The open middle plate shows the channels beneath the cover.

Select an accessory to open its related host record.

Individual records (3 editions)

Black and Gold Zirconium

Both launch builds have a zirconium middle plate and a spare spaced track. The black-and-gold build also uses zirconium for its covers. A gold-colored corner peeks out from the dark cover. Zigzag engraving crosses the face. The corresponding TRB option is Zirconium. Compare with Purple and Black Titanium.

400 total across both launch materials
No studio measurement published
No studio measurement published
Zirconium plates and covers, PEEK retaining block
Dark covers and gold-colored edges
One of two named September 2024 launch materials
Official announcement & image position

Studio launch notice · Studio launch notice

Studio announcement
Purple and Black Titanium

Titanium replaces zirconium in the covers. The launch notice specifies the same middle plate, two track patterns and retaining block. The dealer calls this finish polished purple titanium. The purple slider lies diagonally on blue ribs. Two bands of zigzag engraving flank the studio motif. Compare with Ink-Splash Titanium.

400 total across both launch materials
No studio measurement published
No studio measurement published
Titanium covers, zirconium plates, PEEK retaining block
Purple titanium face against dark edges
One of two named September 2024 launch materials
Official announcement & image position

Studio launch notice and named retail photo · Studio launch notice and named retail photo

Studio announcement
Ink-Splash Titanium

The dealer lists Ink Splash as a third SKU. Retail specimen photos and multiple auction records corroborate the finish. WM names black/gold and purple/black in the two launch notices. The complete slider is partly open. Its angular engraving shows between the flecks, with the gold-colored channels and stop visible at the end. Compare with Black and Gold Zirconium.

No quantity published for this dealer finish
No studio measurement published
No studio measurement published
Dealer-listed titanium covers, gold-toned middle plate
Blue, yellow and violet splashes
Dealer configuration, launch date undocumented
Official announcement & image position

Named dealer SKU and a separate complete specimen · Named dealer SKU and a separate complete specimen

Taobao product record

Configuration details

DESIGN THROUGH TIME

Edition records

WM introduced Q in black-and-gold zirconium and purple-and-black titanium on September 5, 2024. Its September 8 notice clarifies the allocation. The first 100 sold out. Of the remaining 300, 200 were allocated to the September 11 group order. The total of 400 covers both launch materials. A dealer SKU and traded specimens document Ink-Splash Titanium; its release date is unconfirmed.

  1. Q Mechanical Slider Configuration Matrix3 verified records
    2024-09-05Black and Gold Zirconium
    2024-09-05Purple and Black Titanium
    N/DInk-Splash Titanium
    STAGE 01

    Two launch builds announced

    WM identifies both cover materials and the track plates supplied with them.

  2. Purple and Black TitaniumEnlarge this crop ↗
    STAGE 02

    Studio clarifies its allocation

    The 400-unit run comprises 100 initial units and a second allocation of 300.

Choose two to compare

Compare any two verified configurations side by side across standardized fields.

⚡ 1-CLICK COMPARE PRESETSSelect any matchup to launch an instant side-by-side specification comparison

Host specifications side by side

The material and run size refer to the host.

Host specifications side by side
Dimension Black and Gold Zirconium Edition A Ink-Splash Titanium Edition B
Material Zirconium plates and covers, PEEK retaining block Dealer-listed titanium covers, gold-toned middle plate
Finish Dark covers and gold-colored edges Blue, yellow and violet splashes
Numbered run 400 total across both launch materials No quantity published for this dealer finish

REQUEST A CONFIGURATION OR PART

Looking for WM EDC Q Mechanical Slider?

Share the edition, material, or accessory you are looking for, and include a reference photo or serial number if available.

Send a sourcing request ↗

Keep exploring

FREQUENTLY ASKED QUESTIONS

Common questions about WM EDC Q Mechanical Slider

How was the original run allocated?

WM’s September 8 notice gives a combined run of 400. The first 100 sold out. The second 300 included dealer allocations, with 200 going to the group order. WM did not publish the split by cover material.

WM’s September 5 release and September 8 order notice establish the launch builds. Named dealer and retail records supply finish and component photographs.

Which ball and spring pairs came with Q?

WM specifies a 3 mm zirconia ball with a 0.3 × 3 × 5 mm Ruida spring in one seat. The second pairs a 3.175 mm zirconia ball with a 0.25 × 3 × 5 mm Ruida spring.

WM’s September 5 release and September 8 order notice establish the launch builds. Named dealer and retail records supply finish and component photographs.

What identifies the Ink-Splash finish?

The dealer lists Ink Splash under the same Q product. Flecks of different colors cross the original zigzag engraving. The photographed open specimen shows the middle plate, and named transactions provide further examples.

WM’s September 5 release and September 8 order notice establish the launch builds. Named dealer and retail records supply finish and component photographs.

OFFICIAL ARCHIVE CITATION

Citing this guide

When referencing the configuration records, mass tiers, or identification rules from this page, use the citation format below.

Studio and dealer records

TRB Creation, “WM EDC Q Mechanical Slider Guide to Launch Finishes and Track Plates”, TRB EDC Wiki, https://trb-creation.com/pages/wiki-wm-edc-q (Verified 2026-11-21).

Enlarged image

Compare configurations