01EDC01EDC
01EDC FAMILY ARCHIVE

01EDC Mini Burger Edition and Mechanism Guide

The rippled faces, inset badge and sliding center plate identify the 01EDC Mini Burger. Across three metals, the studio documented seven complete combinations.

TRB Creation · 2026-11-19

Family facts
Studio 01EDC
Documented hosts 7
Separate accessory records 2
Host materials Stainless steel, Titanium alloy, Zirconium alloy

On April 25, 2024, 01EDC announced the Mini Burger. Six combinations were scheduled for the factory Taobao launch at 3 p.m. on April 27. The international factory listing published April 29 contains seven, including stonewashed zirconium.

How the editions were identified

01EDC launch specification sheet, factory store variants and variant photographs

FAMILY ARCHIVE

Editions & configurations

7 complete-configuration records

The rippled faces, inset badge and sliding center plate identify the 01EDC Mini Burger. Across three metals, the studio documented seven complete combinations.

Stainless steelBrowse group2 configuration recordsRegular stonewash and limited satin polish share a brass badge and black middle plate.
Titanium alloyBrowse group2 configuration recordsStonewashed titanium carries a copper badge. Polished blue titanium carries a titanium badge.
Zirconium alloyBrowse group3 configuration recordsTwo polished zirconium editions appeared at launch. The factory shop also documents a stonewashed option.
TRB WIKI VERIFIED SPECIFICATION

Documented points

Rippled faces and central plate of the Mini Burger

The alternating arcs on the outer faces give the fingertips purchase.

The outer faces slide along the long axis. Tactile steps continue on the return stroke.

A PTFE plate sits between the two metal faces. The internal stop bounds their travel.

01

How the movement feels

The Mini Burger is a three-layer mechanical slider. Its two outer faces move along a central plate, with a stop limiting their travel. The studio describes up to 48 tactile steps across opening and closing together, with feedback in both directions.

The alternating arcs on the outer faces give the fingertips purchase.

Rippled faces and central plate of the Mini BurgerRippled outer faces, central plate and bounded travelExterior detail · not to scaleRippled grip facesReturn strokeCenter plate and stop

The alternating arcs on the outer faces give the fingertips purchase.

Rippled faces and central plate of the Mini Burger

  1. The alternating arcs on the outer faces give the fingertips purchase.
  2. The outer faces slide along the long axis. Tactile steps continue on the return stroke.
  3. A PTFE plate sits between the two metal faces. The internal stop bounds their travel.
02

Identifying the editions

On April 25, 2024, 01EDC announced the Mini Burger. Six combinations were scheduled for the factory Taobao launch at 3 p.m. on April 27. The international factory listing published April 29 contains seven, including stonewashed zirconium.

A brass badge breaks up the silver-gray rippled face. A black PTFE plate sits between the steel faces. The studio designated this as its regular production finish.

The factory shop assigns this finish its own variant and photograph. Its dark gray ridges, subdued field and dark badge distinguish it from the two polished zirconium editions. The launch sheet gives no separate weight or run size for this finish.

03

Reading an accessory listing

Hide details ▴Show details ▾

The factory Taobao listing offers separate white and black PTFE middle plates. Both are replacement parts. The metal badges on complete sliders identify specific material combinations.

04

Choosing editions to compare

Compare body material and finish against the individual photographs.

Stainless steel

Regular stonewash and limited satin polish share a brass badge and black middle plate.

Titanium alloy

Stonewashed titanium carries a copper badge. Polished blue titanium carries a titanium badge.

Zirconium alloy

Two polished zirconium editions appeared at launch. The factory shop also documents a stonewashed option.

05

Sources, roadmap clues & scope boundaries

Hide details ▴Show details ▾

Beyond the verified configurations in this guide, the following clues and cross-family mentions are tracked separately:

  • Collector records:Two reseller options use the numbers 666 and 777. Their photographs show a longer engraved face, and the studio’s Mini Burger records do not identify them as editions. OS EDC markets a separate Hamburger. The launch drawing awarded existing steel, titanium and zirconium finishes.
PARTS & PERIPHERALS ARCHIVE

Accessories and anatomy

2 records

The factory Taobao listing offers separate white and black PTFE middle plates. Both are replacement parts. The metal badges on complete sliders identify specific material combinations.

Select an accessory to open its related host record.

Individual records (7 editions)

Stonewashed stainless steel

[Compare with: Polished stainless steel] Stainless steel / Blasted and stonewashed. How to recognize: A brass badge breaks up the silver-gray rippled face. A black PTFE plate sits between the steel faces. The studio designated this as its regular production finish. (Source note: Stonewashed stainless steel).

Regular edition, quantity undisclosed
55.7 g
40 × 26 × 15 mm (TRB listing)
Stainless steel
Blasted and stonewashed
Unpublished measurements are marked N/D.
Official announcement & image position

01EDC launch specification sheet, factory store variants and variant photographs · Single-edition photograph

Official source · 01EDC launch specification sheet, factory store variants and variant photographs
Polished stainless steel

[Compare with: Stonewashed titanium] Stainless steel / Satin polish. How to recognize: This shares the brass badge and black center plate of stonewashed steel. A continuous highlight follows the polished rim, with fine dark lines in the rippled sections. (Source note: Polished stainless steel).

99 pieces
55.7 g
40 × 26 × 15 mm (TRB listing)
Stainless steel
Satin polish
Unpublished measurements are marked N/D.
Official announcement & image position

01EDC launch specification sheet, factory store variants and variant photographs · Single-edition photograph

Official source · 01EDC launch specification sheet, factory store variants and variant photographs
Stonewashed titanium

[Compare with: Polished blue titanium] Titanium alloy / Blasted and stonewashed. How to recognize: The gray titanium face carries a reddish copper badge. A white PTFE plate completes the factory combination. The softly lit ridges and warm badge are both visible in the photograph. (Source note: Stonewashed titanium).

99 pieces
36.6 g
40 × 26 × 15 mm (TRB listing)
Titanium alloy
Blasted and stonewashed
Unpublished measurements are marked N/D.
Official announcement & image position

01EDC launch specification sheet, factory store variants and variant photographs · Single-edition photograph

Official source · 01EDC launch specification sheet, factory store variants and variant photographs
Polished blue titanium

[Compare with: Black Gold zirconium] Titanium alloy / Polished and heat-colored. How to recognize: Blue and violet reflections run across the polished ridges. The studio specifies a titanium badge and a white PTFE center plate. Its international shop lists this finish as polished blue titanium. (Source note: Polished blue titanium).

99 pieces
36.6 g
40 × 26 × 15 mm (TRB listing)
Titanium alloy
Polished and heat-colored
Unpublished measurements are marked N/D.
Official announcement & image position

01EDC launch specification sheet, factory store variants and variant photographs · Single-edition photograph

Official source · 01EDC launch specification sheet, factory store variants and variant photographs
Black Gold zirconium

[Compare with: Ice zirconium] Zirconium alloy / Polished and heat-blackened. How to recognize: A gold-toned zirconium badge sits in the dark polished face. The studio paired this finish with a white PTFE plate, visible where the outer layers separate. (Source note: Black Gold zirconium).

80 pieces
47.2 g
40 × 26 × 15 mm (TRB listing)
Zirconium alloy
Polished and heat-blackened
Unpublished measurements are marked N/D.
Official announcement & image position

01EDC launch specification sheet, factory store variants and variant photographs · Single-edition photograph

Official source · 01EDC launch specification sheet, factory store variants and variant photographs
Ice zirconium

[Compare with: Stonewashed zirconium] Zirconium alloy / Polished and heat-colored. How to recognize: A cool blue badge sits at the center of the reflective zirconium face. Its blue cast changes with the light. The studio pairs it with white PTFE and gives a run of 66. (Source note: Ice zirconium).

66 pieces
47.2 g
40 × 26 × 15 mm (TRB listing)
Zirconium alloy
Polished and heat-colored
Unpublished measurements are marked N/D.
Official announcement & image position

01EDC launch specification sheet, factory store variants and variant photographs · Single-edition photograph

Official source · 01EDC launch specification sheet, factory store variants and variant photographs
Stonewashed zirconium

[Compare with: Stonewashed stainless steel] Zirconium alloy / Stonewashed. How to recognize: The factory shop assigns this finish its own variant and photograph. Its dark gray ridges, subdued field and dark badge distinguish it from the two polished zirconium editions. The launch sheet gives no separate weight or run size for this finish. (Source note: Stonewashed zirconium).

Run size not published
Official weight N/D
40 × 26 × 15 mm (TRB listing)
Zirconium alloy
Stonewashed
Unpublished measurements are marked N/D.
Official announcement & image position

01EDC launch specification sheet, factory store variants and variant photographs · Single-edition photograph

Official source · 01EDC launch specification sheet, factory store variants and variant photographs

Configuration details

DESIGN THROUGH TIME

Edition records

On April 25, 2024, 01EDC announced the Mini Burger. Six combinations were scheduled for the factory Taobao launch at 3 p.m. on April 27. The international factory listing published April 29 contains seven, including stonewashed zirconium.

  1. Mini Burger Configuration Matrix7 verified records
    2024-04-27Stonewashed stainless steel
    2024-04-27Polished stainless steel
    2024-04-27Stonewashed titanium
    2024-04-27Polished blue titanium
    STAGE 01

    Stonewashed stainless steel

    A brass badge breaks up the silver-gray rippled face. A black PTFE plate sits between the steel faces. The studio designated this as its regular production finish.

  2. Polished stainless steelEnlarge this crop ↗
    STAGE 02

    Polished stainless steel

    This shares the brass badge and black center plate of stonewashed steel. A continuous highlight follows the polished rim, with fine dark lines in the rippled sections.

  3. Stonewashed titaniumEnlarge this crop ↗
    STAGE 03

    Stonewashed titanium

    The gray titanium face carries a reddish copper badge. A white PTFE plate completes the factory combination. The softly lit ridges and warm badge are both visible in the photograph.

  4. Polished blue titaniumEnlarge this crop ↗
    STAGE 04

    Polished blue titanium

    Blue and violet reflections run across the polished ridges. The studio specifies a titanium badge and a white PTFE center plate. Its international shop lists this finish as polished blue titanium.

  5. Black Gold zirconiumEnlarge this crop ↗
    STAGE 05

    Black Gold zirconium

    A gold-toned zirconium badge sits in the dark polished face. The studio paired this finish with a white PTFE plate, visible where the outer layers separate.

  6. Ice zirconiumEnlarge this crop ↗
    STAGE 06

    Ice zirconium

    A cool blue badge sits at the center of the reflective zirconium face. Its blue cast changes with the light. The studio pairs it with white PTFE and gives a run of 66.

  7. Stonewashed zirconiumEnlarge this crop ↗
    STAGE 07

    Stonewashed zirconium

    The factory shop assigns this finish its own variant and photograph. Its dark gray ridges, subdued field and dark badge distinguish it from the two polished zirconium editions. The launch sheet gives no separate weight or run size for this finish.

Choose two to compare

Compare any two verified configurations side by side across standardized fields.

⚡ 1-CLICK COMPARE PRESETSSelect any matchup to launch an instant side-by-side specification comparison

Host specifications side by side

The material and run size refer to the host.

Host specifications side by side
Dimension Stonewashed stainless steel This Family Stonewashed zirconium Peer Reference
Material Stainless steel Zirconium alloy
Finish Blasted and stonewashed Stonewashed
Release quantity Regular edition, quantity undisclosed Run size not published

REQUEST A CONFIGURATION OR PART

Looking for 01EDC Mini Burger?

Share the edition, material, or accessory you are looking for, and include a reference photo or serial number if available.

Send a sourcing request ↗

Keep exploring

FREQUENTLY ASKED QUESTIONS

Common questions about 01EDC Mini Burger

Why do factory sources give both six and seven finishes?

On April 25, 2024, 01EDC announced the Mini Burger. Six combinations were scheduled for the factory Taobao launch at 3 p.m. on April 27. The international factory listing published April 29 contains seven, including stonewashed zirconium.

01EDC launch specification sheet, factory store variants and variant photographs

How many Ice zirconium sliders were announced?

The original studio sheet gives 66 pieces for Ice zirconium and 80 for Black Gold. Stonewashed titanium, blue titanium and polished steel each had an announced run of 99.

01EDC launch specification sheet, factory store variants and variant photographs

Which finishes came with each middle plate?

The two steel finishes use black. Both launch titanium finishes, Black Gold zirconium and Ice zirconium use white. The factory entry for stonewashed zirconium leaves its middle plate color unspecified.

01EDC launch specification sheet, factory store variants and variant photographs

How does the studio count the 48 steps?

The studio counts up to 48 across opening and closing together. It gives no separate figure for a single direction.

01EDC launch specification sheet, factory store variants and variant photographs

OFFICIAL ARCHIVE CITATION

Citing this guide

When referencing the configuration records, mass tiers, or identification rules from this page, use the citation format below.

TRB Creation, “01EDC Mini Burger Edition and Mechanism Guide”, TRB EDC Wiki, https://trb-creation.com/pages/wiki-01edc-mini-burger (Verified 2026-11-19).

Enlarged image

Compare configurations