01EDC01EDC
01EDC FAMILY ARCHIVE

01EDC ZERO Edition and Mechanism Guide

ZERO stretches the studio’s numeral 0 into a long oval. Five finishes share one body outline and bearing size. The steel and zirconium versions carry different published weights.

TRB Creation · 2026-11-19

Family facts
Studio 01EDC
Documented hosts 5
Component records 3
Host materials Stainless steel, Zirconium

01EDC introduced ZERO on September 19, 2024. The outlines draw on the 0 in the studio’s name. Five finishes went on sale together on September 21 as finished stock, each with a fixed production limit.

How the editions were identified

01EDC launch notice, five factory shop options and identifiable specimens

FAMILY ARCHIVE

Editions & configurations

5 complete-configuration records

ZERO stretches the studio’s numeral 0 into a long oval. Five finishes share one body outline and bearing size. The steel and zirconium versions carry different published weights.

Stainless steelBrowse group2 configuration recordsStonewashed and polished steel were limited to 99 each.
ZirconiumBrowse group3 configuration recordsMatte black and Ice Blue had 99 each. Polished black had 50.
TRB WIKI VERIFIED SPECIFICATION

Documented points

Center and arms of the ZERO spinner

The two raised caps give the fingers a central grip and leave room to flick the outer body.

Under the caps, an R188 bearing sits in the middle of the rotating body.

The elongated openings each hold an 8 mm steel ball. Both can be identified from the front.

01

How the movement feels

Pinch the two circular caps and the oval body turns around its central R188 bearing. An 8 mm steel ball sits in each of the two elongated arm openings. The front view shows all three positions at once.

The two raised caps give the fingers a central grip and leave room to flick the outer body.

Center and arms of the ZERO spinnerInset steel balls, paired caps and center bearingExterior detail · not to scalePaired grip capsCentral bearingInset steel balls

The two raised caps give the fingers a central grip and leave room to flick the outer body.

Center and arms of the ZERO spinner

  1. The two raised caps give the fingers a central grip and leave room to flick the outer body.
  2. Under the caps, an R188 bearing sits in the middle of the rotating body.
  3. The elongated openings each hold an 8 mm steel ball. Both can be identified from the front.
02

Identifying the editions

01EDC introduced ZERO on September 19, 2024. The outlines draw on the 0 in the studio’s name. Five finishes went on sale together on September 21 as finished stock, each with a fixed production limit.

The two silver-gray arms diffuse the light across their broad curves. Small, sharper highlights on the steel balls stand out in the two openings.

The blue surface shades into deeper teal around the curved ends. The studio names the finish Bingpo and describes fine polishing followed by anodic heat coloring.

03

Reading an accessory listing

Hide details ▴Show details ▾

The R188 bearing, paired grip caps and two inset steel balls are visible on production specimens. All five ZERO options in the studio shop are complete spinners. A separate ZERO parts release remains undocumented.

04

Choosing editions to compare

Compare body material and finish against the individual photographs.

Stainless steel

Stonewashed and polished steel were limited to 99 each.

Zirconium

Matte black and Ice Blue had 99 each. Polished black had 50.

05

Sources, roadmap clues & scope boundaries

Hide details ▴Show details ▾

Beyond the verified configurations in this guide, the following clues and cross-family mentions are tracked separately:

  • Collector records:The three launch prizes came from the stonewashed steel, polished steel and polished zirconium runs. Shanghai and Shenzhen promotions the following year again awarded stonewashed steel. One auction explicitly describes later recoloring of an Ice Blue specimen.
PARTS & PERIPHERALS ARCHIVE

Accessories and anatomy

3 records

The R188 bearing, paired grip caps and two inset steel balls are visible on production specimens. All five ZERO options in the studio shop are complete spinners. A separate ZERO parts release remains undocumented.

Select an accessory to open its related host record.

Individual records (5 editions)

Stonewashed stainless steel

[Compare with: Polished stainless steel] Stainless steel / Precision stonewash. How to recognize: The two silver-gray arms diffuse the light across their broad curves. Small, sharper highlights on the steel balls stand out in the two openings. (Source note: Stonewashed stainless steel).

99 pieces, fixed run
71.5 g
59 × 28.5 × 14.3 mm
Stainless steel
Precision stonewash
Unpublished measurements are marked N/D.
Official announcement & image position

01EDC launch notice, five factory shop options and identifiable specimens · Single-edition photograph

Official source · 01EDC launch notice, five factory shop options and identifiable specimens
Polished stainless steel

[Compare with: Black stonewashed zirconium] Stainless steel / Fine polish. How to recognize: The bright steel arms mirror the glove and the darker area around the caps. Reflections bend around both tips, and the two exposed balls retain their silver color. (Source note: Polished stainless steel).

99 pieces, fixed run
71.5 g
59 × 28.5 × 14.3 mm
Stainless steel
Fine polish
Unpublished measurements are marked N/D.
Official announcement & image position

01EDC launch notice, five factory shop options and identifiable specimens · Single-edition photograph

Official source · 01EDC launch notice, five factory shop options and identifiable specimens
Black stonewashed zirconium

[Compare with: Black polished zirconium] Zirconium / Stonewashed, then fired black. How to recognize: The launch heading calls this the matte zirconium edition. Its process note specifies stonewashing followed by black heat coloring. The subdued surface contrasts with the bright steel balls. (Source note: Black stonewashed zirconium).

99 pieces, fixed run
61 g
59 × 28.5 × 14.3 mm
Zirconium
Stonewashed, then fired black
Unpublished measurements are marked N/D.
Official announcement & image position

01EDC launch notice, five factory shop options and identifiable specimens · Single-edition photograph

Official source · 01EDC launch notice, five factory shop options and identifiable specimens
Black polished zirconium

[Compare with: Ice Blue zirconium] Zirconium / Fine-polished, then fired black. How to recognize: Bright reflections follow the curved black arms in the studio photograph. The published limit of 50 distinguishes this finish from the other four. (Source note: Black polished zirconium).

50 pieces, fixed run
61 g
59 × 28.5 × 14.3 mm
Zirconium
Fine-polished, then fired black
Unpublished measurements are marked N/D.
Official announcement & image position

01EDC launch notice, five factory shop options and identifiable specimens · Single-edition photograph

Official source · 01EDC launch notice, five factory shop options and identifiable specimens
Ice Blue zirconium

[Compare with: Stonewashed stainless steel] Zirconium / Fine polish, then anodic heat coloring. How to recognize: The blue surface shades into deeper teal around the curved ends. The studio names the finish Bingpo and describes fine polishing followed by anodic heat coloring. (Source note: Ice Blue zirconium).

99 pieces, fixed run
61 g
59 × 28.5 × 14.3 mm
Zirconium
Fine polish, then anodic heat coloring
Unpublished measurements are marked N/D.
Official announcement & image position

01EDC launch notice, five factory shop options and identifiable specimens · Single-edition photograph

Official source · 01EDC launch notice, five factory shop options and identifiable specimens

Configuration details

DESIGN THROUGH TIME

Edition records

01EDC introduced ZERO on September 19, 2024. The outlines draw on the 0 in the studio’s name. Five finishes went on sale together on September 21 as finished stock, each with a fixed production limit.

  1. ZERO Configuration Matrix5 verified records
    2024-09-21Stonewashed stainless steel
    2024-09-21Polished stainless steel
    2024-09-21Black stonewashed zirconium
    2024-09-21Black polished zirconium
    STAGE 01

    Stonewashed stainless steel

    The two silver-gray arms diffuse the light across their broad curves. Small, sharper highlights on the steel balls stand out in the two openings.

  2. Polished stainless steelEnlarge this crop ↗
    STAGE 02

    Polished stainless steel

    The bright steel arms mirror the glove and the darker area around the caps. Reflections bend around both tips, and the two exposed balls retain their silver color.

  3. Black stonewashed zirconiumEnlarge this crop ↗
    STAGE 03

    Black stonewashed zirconium

    The launch heading calls this the matte zirconium edition. Its process note specifies stonewashing followed by black heat coloring. The subdued surface contrasts with the bright steel balls.

  4. Black polished zirconiumEnlarge this crop ↗
    STAGE 04

    Black polished zirconium

    Bright reflections follow the curved black arms in the studio photograph. The published limit of 50 distinguishes this finish from the other four.

  5. Ice Blue zirconiumEnlarge this crop ↗
    STAGE 05

    Ice Blue zirconium

    The blue surface shades into deeper teal around the curved ends. The studio names the finish Bingpo and describes fine polishing followed by anodic heat coloring.

Choose two to compare

Compare any two verified configurations side by side across standardized fields.

⚡ 1-CLICK COMPARE PRESETSSelect any matchup to launch an instant side-by-side specification comparison

Host specifications side by side

The material and run size refer to the host.

Host specifications side by side
Dimension Stonewashed stainless steel This Family Ice Blue zirconium Peer Reference
Material Stainless steel Zirconium
Finish Precision stonewash Fine polish, then anodic heat coloring
Release quantity 99 pieces, fixed run 99 pieces, fixed run

REQUEST A CONFIGURATION OR PART

Looking for 01EDC ZERO?

Share the edition, material, or accessory you are looking for, and include a reference photo or serial number if available.

Send a sourcing request ↗

Keep exploring

FREQUENTLY ASKED QUESTIONS

Common questions about 01EDC ZERO

Do matte zirconium and black stonewash identify separate runs?

The studio uses matte zirconium in its photo heading, describes stonewashing and heat coloring in the process note, and labels the shop option stonewashed zirconium. All three identify the same run of 99.

01EDC launch notice, five factory shop options and identifiable specimens

What production limits did the studio announce?

Stonewashed steel, polished steel, black stonewashed zirconium and Ice Blue zirconium had 99 each. Polished black zirconium had 50. The five announced limits sum to 446.

01EDC launch notice, five factory shop options and identifiable specimens

How can the round components be identified?

The 8 mm steel balls sit in the two arm openings. The paired grip caps sit on the axis of rotation, covering the R188 bearing.

01EDC launch notice, five factory shop options and identifiable specimens

How are event prizes and later recolors recorded?

The three launch prizes came from the stonewashed steel, polished steel and polished zirconium runs. Shanghai and Shenzhen promotions the following year again awarded stonewashed steel. One auction explicitly describes later recoloring of an Ice Blue specimen.

01EDC launch notice, five factory shop options and identifiable specimens

OFFICIAL ARCHIVE CITATION

Citing this guide

When referencing the configuration records, mass tiers, or identification rules from this page, use the citation format below.

TRB Creation, “01EDC ZERO Edition and Mechanism Guide”, TRB EDC Wiki, https://trb-creation.com/pages/wiki-01edc-zero (Verified 2026-11-19).

Enlarged image

Compare configurations