CHIMAGOCHIMAGO
Chimago FAMILY ARCHIVE

Chimago Kong Kim Two-Lobe Fidget Spinner Edition Guide

Two curved lobes surround the center button. Compare the six-material launch record with retail titanium finishes and the studio’s engraved auction pieces.

TRB Creation · 2026-11-20

Family facts
Studio Chimago
Documented hosts 12
Parts and anatomy One separate cap and two anatomy views
Host materials Copper, Stainless steel, Zirconium, Titanium Damascus, Zirconium–titanium laminate, Titanium

Chimago widened the two lobes of its earlier Exorcism spinner, revised the center inlay and incorporated a paired-fish motif. The studio announced Kong Kim on July 25, 2024 and opened its six-material preorder on July 27.

How the editions were identified

Chimago’s July 2024 launch notice, two January 2025 auction records and TRB’s individually photographed product variants.

FAMILY ARCHIVE

Editions & configurations

12 complete-configuration records

Two curved lobes surround the center button. Compare the six-material launch record with retail titanium finishes and the studio’s engraved auction pieces.

Launch materialsBrowse group5 configuration recordsFive launch materials have individually identified photographs.
Titanium finishesBrowse group3 configuration recordsPolished, stonewashed and anodized titanium specimens.
Studio-engraved auction piecesBrowse group4 configuration recordsPieces documented in two studio auctions in January 2025.
TRB WIKI VERIFIED SPECIFICATION

Documented points

Two lobes, six bead seats and a center bearing

Pinch the two round center buttons and leave the lobes free.

Flick one lobe and watch the body turn around the center bearing.

Let the spinner stop, then locate the four large beads and two smaller ones.

01

How the movement feels

Pinch the center buttons and flick either lobe. The body turns around an R188 bearing. The two widened lobes hold four 7 mm beads and two 5 mm beads.

Pinch the two round center buttons and leave the lobes free.

Two lobes, six bead seats and a center bearingTwin lobes, six beads and opposing center capsExterior detail · not to scaleHoldFlickIdentify bead seats

Pinch the two round center buttons and leave the lobes free.

Two lobes, six bead seats and a center bearing

  1. Pinch the two round center buttons and leave the lobes free.
  2. Flick one lobe and watch the body turn around the center bearing.
  3. Let the spinner stop, then locate the four large beads and two smaller ones.
02

Identifying the editions

Chimago widened the two lobes of its earlier Exorcism spinner, revised the center inlay and incorporated a paired-fish motif. The studio announced Kong Kim on July 25, 2024 and opened its six-material preorder on July 27.

The copper-colored body frames dark beads at both ends.

Fine engraving sits in the recesses of the dark wings. Chimago identified the January 19 lot as number 001.

03

Reading an accessory listing

Hide details ▴Show details ▾

A separate center cap and two physical anatomy views. The written inventory also records the steel cap and optional rod.

04

Choosing editions to compare

Compare body material and finish against the individual photographs.

Launch materials

Five launch materials have individually identified photographs.

Titanium finishes

Polished, stonewashed and anodized titanium specimens.

Studio-engraved auction pieces

Pieces documented in two studio auctions in January 2025.

05

Sources, roadmap clues & scope boundaries

Hide details ▴Show details ▾

Beyond the verified configurations in this guide, the following clues and cross-family mentions are tracked separately:

  • Collector records:The six launch materials were copper, stainless steel, zirconium, Mokuti, Zircuti and dragon-scale Damascus. Chimago documented Dragon Scale in writing. An individually verified photograph for publication is still missing for that edition. The optional rod was sold separately. The studio shop also listed gold-tone and stainless-steel center caps.
PARTS & PERIPHERALS ARCHIVE

Accessories and anatomy

3 records

A separate center cap and two physical anatomy views. The written inventory also records the steel cap and optional rod.

Select an accessory to open its related host record.

Individual records (12 editions)

Copper

[Compare with: Polished stainless steel] The photographed body is copper. How to recognize: The copper-colored body frames dark beads at both ends. (Source note: Copper).

Regular material; studio gave no fixed total
Official weight N/D
55 × 29.5 × 12.7 mm (family specification)
Copper
Natural finish
Dimensions describe the family. An auction number identifies the individually listed piece.
Official announcement & image position

Chimago release or auction record, or the named TRB whole-spinner variant. · Single-edition photograph

Official source · Chimago release or auction record, or the named TRB whole-spinner variant.
Polished stainless steel

[Compare with: Zirconium] The photographed body is stainless steel. How to recognize: Narrow reflections trace the polished outside edge of each lobe. (Source note: Polished stainless steel).

Regular material; studio gave no fixed total
Official weight N/D
55 × 29.5 × 12.7 mm (family specification)
Stainless steel
Polished
Dimensions describe the family. An auction number identifies the individually listed piece.
Official announcement & image position

Chimago release or auction record, or the named TRB whole-spinner variant. · Single-edition photograph

Official source · Chimago release or auction record, or the named TRB whole-spinner variant.
Zirconium

[Compare with: Mokuti] The photographed body is zirconium. How to recognize: Blue and violet reflections cross the dark body in the studio launch photograph. (Source note: Zirconium).

Regular material; studio gave no fixed total
Official weight N/D
55 × 29.5 × 12.7 mm (family specification)
Zirconium
Iridescent specimen
Dimensions describe the family. An auction number identifies the individually listed piece.
Official announcement & image position

Chimago release or auction record, or the named TRB whole-spinner variant. · Single-edition photograph

Official source · Chimago release or auction record, or the named TRB whole-spinner variant.
Mokuti

[Compare with: Zircuti] The photographed body is titanium damascus. How to recognize: Blue and orange bands curl across the titanium laminate on both lobes. (Source note: Mokuti).

50 per special material
Official weight N/D
55 × 29.5 × 12.7 mm (family specification)
Titanium Damascus
Colored laminate
Dimensions describe the family. An auction number identifies the individually listed piece.
Official announcement & image position

Chimago release or auction record, or the named TRB whole-spinner variant. · Single-edition photograph

Official source · Chimago release or auction record, or the named TRB whole-spinner variant.
Zircuti

[Compare with: Polished titanium] The photographed body is zirconium–titanium laminate. How to recognize: Colored bands run over the tips and around the bead openings. (Source note: Zircuti).

50 per special material
Official weight N/D
55 × 29.5 × 12.7 mm (family specification)
Zirconium–titanium laminate
Colored laminate
Dimensions describe the family. An auction number identifies the individually listed piece.
Official announcement & image position

Chimago release or auction record, or the named TRB whole-spinner variant. · Single-edition photograph

Official source · Chimago release or auction record, or the named TRB whole-spinner variant.
Polished titanium

[Compare with: Stonewashed titanium] The photographed body is titanium. How to recognize: Both lobes carry a smooth, continuous reflection. Chimago listed polished titanium in January 2025. (Source note: Polished titanium).

Total run undisclosed
Official weight N/D
55 × 29.5 × 12.7 mm (family specification)
Titanium
Polished
Dimensions describe the family. An auction number identifies the individually listed piece.
Official announcement & image position

Chimago release or auction record, or the named TRB whole-spinner variant. · Single-edition photograph

Official source · Chimago release or auction record, or the named TRB whole-spinner variant.
Stonewashed titanium

[Compare with: Polished and anodized titanium] The photographed body is titanium. How to recognize: The stonewashed surface breaks the reflection into a softer band along each edge. (Source note: Stonewashed titanium).

Total run undisclosed
Official weight N/D
55 × 29.5 × 12.7 mm (family specification)
Titanium
Stonewashed
Dimensions describe the family. An auction number identifies the individually listed piece.
Official announcement & image position

Chimago release or auction record, or the named TRB whole-spinner variant. · Single-edition photograph

Official source · Chimago release or auction record, or the named TRB whole-spinner variant.
Polished and anodized titanium

[Compare with: Engraved copper 001] The photographed body is titanium. How to recognize: The retail variant photograph shows a blue-violet sheen across the polished lobes. (Source note: Polished and anodized titanium).

Total run undisclosed
Official weight N/D
55 × 29.5 × 12.7 mm (family specification)
Titanium
Polished and anodized
Dimensions describe the family. An auction number identifies the individually listed piece.
Official announcement & image position

Chimago release or auction record, or the named TRB whole-spinner variant. · Single-edition photograph

Official source · Chimago release or auction record, or the named TRB whole-spinner variant.
Engraved copper 001

[Compare with: Engraved stainless steel 001] The photographed body is copper. How to recognize: Fine short strokes cover the copper-colored wings. The studio registry ends the copper piece’s identifier in 001. (Source note: Engraved copper 001).

Individual auction record; series total undisclosed
Official weight N/D
55 × 29.5 × 12.7 mm (family specification)
Copper
Engraved
Dimensions describe the family. An auction number identifies the individually listed piece.
Official announcement & image position

Chimago release or auction record, or the named TRB whole-spinner variant. · Single-edition photograph

Official source · Chimago release or auction record, or the named TRB whole-spinner variant.
Engraved stainless steel 001

[Compare with: Engraved titanium] The photographed body is stainless steel. How to recognize: The pale steel wings carry engraved detail beyond the bevels around the dark beads. (Source note: Engraved stainless steel 001).

Individual auction record; series total undisclosed
Official weight N/D
55 × 29.5 × 12.7 mm (family specification)
Stainless steel
Engraved
Dimensions describe the family. An auction number identifies the individually listed piece.
Official announcement & image position

Chimago release or auction record, or the named TRB whole-spinner variant. · Single-edition photograph

Official source · Chimago release or auction record, or the named TRB whole-spinner variant.
Engraved titanium

[Compare with: Engraved colored zirconium 001] The photographed body is titanium. How to recognize: Deep diagonal, feather-like cuts cross both lobes of the studio’s titanium auction specimen. (Source note: Engraved titanium).

Individual auction record; series total undisclosed
Official weight N/D
55 × 29.5 × 12.7 mm (family specification)
Titanium
Engraved
Dimensions describe the family. An auction number identifies the individually listed piece.
Official announcement & image position

Chimago release or auction record, or the named TRB whole-spinner variant. · Single-edition photograph

Official source · Chimago release or auction record, or the named TRB whole-spinner variant.
Engraved colored zirconium 001

[Compare with: Copper] The photographed body is zirconium. How to recognize: Fine engraving sits in the recesses of the dark wings. Chimago identified the January 19 lot as number 001. (Source note: Engraved colored zirconium 001).

Individual auction record; series total undisclosed
Official weight N/D
55 × 29.5 × 12.7 mm (family specification)
Zirconium
Engraved and colored
Dimensions describe the family. An auction number identifies the individually listed piece.
Official announcement & image position

Chimago release or auction record, or the named TRB whole-spinner variant. · Single-edition photograph

Official source · Chimago release or auction record, or the named TRB whole-spinner variant.

Configuration details

DESIGN THROUGH TIME

Edition records

Chimago widened the two lobes of its earlier Exorcism spinner, revised the center inlay and incorporated a paired-fish motif. The studio announced Kong Kim on July 25, 2024 and opened its six-material preorder on July 27.

  1. Kong Kim Configuration Matrix12 verified records
    2024-07-27Copper
    2024-07-27Polished stainless steel
    2024-07-27Zirconium
    2024-07-27Mokuti
    STAGE 01

    Six-material preorder

    Chimago announced six materials on July 25, with reservations opening July 27.

  2. Polished titaniumEnlarge this crop ↗
    STAGE 02

    Polished titanium redemption

    The studio offered two polished titanium spinners in its points redemption list.

  3. Engraved copper 001Enlarge this crop ↗
    STAGE 03

    Three engraved auction pieces

    The first three listed auction pieces were copper, stainless steel and titanium Kong Kim spinners.

  4. Engraved colored zirconium 001Enlarge this crop ↗
    STAGE 04

    Engraved colored zirconium 001

    The January 18 preview lists number 001 as the first item for the following day.

Choose two to compare

Compare any two verified configurations side by side across standardized fields.

⚡ 1-CLICK COMPARE PRESETSSelect any matchup to launch an instant side-by-side specification comparison

Host specifications side by side

The material and run size refer to the host.

Host specifications side by side
Dimension Copper This Family Engraved colored zirconium 001 Peer Reference
Material Copper Zirconium
Finish Natural finish Engraved and colored
Numbered run Regular material; studio gave no fixed total Individual auction record; series total undisclosed

REQUEST A CONFIGURATION OR PART

Looking for CHIMAGO Kong Kim?

Share the edition, material, or accessory you are looking for, and include a reference photo or serial number if available.

Send a sourcing request ↗

Keep exploring

FREQUENTLY ASKED QUESTIONS

Common questions about CHIMAGO Kong Kim

Which materials were in the July 2024 launch?

The six launch materials were copper, stainless steel, zirconium, Mokuti, Zircuti and dragon-scale Damascus. Chimago documented Dragon Scale in writing. An individually verified photograph for publication is still missing for that edition.

Chimago’s July 2024 launch notice, two January 2025 auction records and TRB’s individually photographed product variants.

What are the dimensions and bearing type?

Chimago gives 55 × 29.5 × 12.7 mm and a 25 mm center cap. TRB specifies an R188 bearing.

Chimago’s July 2024 launch notice, two January 2025 auction records and TRB’s individually photographed product variants.

How are the center caps and rod listed?

The assembled spinner has center buttons. Chimago’s shop offered separate gold-tone and stainless-steel caps. The studio excluded the optional rod from the initial spinner preorder.

Chimago’s July 2024 launch notice, two January 2025 auction records and TRB’s individually photographed product variants.

OFFICIAL ARCHIVE CITATION

Citing this guide

When referencing the configuration records, mass tiers, or identification rules from this page, use the citation format below.

Chimago release records

The six launch materials were copper, stainless steel, zirconium, Mokuti, Zircuti and dragon-scale Damascus. Chimago documented Dragon Scale in writing. An individually verified photograph for publication is still missing for that edition. The optional rod was sold separately. The studio shop also listed gold-tone and stainless-steel center caps.

TRB Creation, “Chimago Kong Kim Two-Lobe Fidget Spinner Edition Guide”, TRB EDC Wiki, https://trb-creation.com/pages/wiki-chimago-kong-kim (Verified 2026-11-20).

Enlarged image

Compare configurations