View original ↗The 2026 Bingwu configuration, shown in hand.View original ↗Luxing: the green-and-black body and Lu-motif front plate.View original ↗A Cai-motif snakewood configuration; the wood grain varies between pieces.View original ↗The front of Jiyun; track information is documented separately.View original ↗The third-anniversary steel-and-PEI configuration, viewed from the front.View original ↗Shou: a blue carbon-quartz body with a gold-plated plate.View original ↗Bingwu carries forward the Xiangrui motif. The exterior motif and the track design are separate features.View original ↗The Bingwu configuration opened up. Body, slider-block and track conditions must be checked for the particular generation.View original ↗Pipa plates in natural PEEK and black PEEK with a steel inlay. These are plate components.View original ↗A Pipa plate in hand. Its front design is distinct from the feedback track on the reverse.View original ↗Tai You Xin body components and single-hole and double-hole slider blocks. This is not a front-and-back plate set.View original ↗Inside the opened Tai You Xin body. This photograph does not indicate that plates are included in the sale.
Lucky Draw is GD EDC's mechanical slider family, with bodies, plates and tracks documented in different combinations. Its sliding feedback depends on the particular configuration, so track details and part compatibility should be checked individually.
Maintained by TRB Creation · Page updated · Based on 40 configuration records on this page
GD EDC’s mechanical slider family. Start with the movement, then see how the body, plates and track shape each configuration.
Read the mechanism with the configuration
Maker documentation describes bidirectional sliding and interchangeable track plates. Check the track, slider block and compatibility for the particular configuration.
The original Lucky Draw slides in both directions. Hold one part and move the other back and forth. The steps you feel during the movement are the feedback.
The 2023 Xiangrui release paired a wooden body with a metal plate. Its long-detent mode was described as three steps in each direction, six across the full travel. Later tracks differ, so this count does not apply to the whole family.
The two parts start aligned. Hold one part while moving the other.
Movement sketch only; it does not show internal construction, dimensions or full travel.
02
What changes? What is included?
The Lucky Draw name can appear on a complete slider, a body-only component or a plate. Identify the object before comparing configurations.
In the original removable-plate design, one face provides the appearance and the reverse carries the ball-groove track. Changing a plate can change the feedback as well as the look. Springs and balls beneath the plate can also be changed to tune the feel.
01
Body
The parts carrying the sliding structure. Materials, blocks and internal details vary by configuration.
+
02
Plates & matching parts
In interchangeable-plate designs, the reverse of the plate carries a track. Some configurations also have a separate back plate.
→
03
Complete configuration
A specific body assembled with suitable plates and other parts. Check what a body, plate or set listing actually includes.
View original ↗Tai You Xin body components and single-hole and double-hole slider blocks. This is not a front-and-back plate set.
The photograph shows the 2026 Tai You Xin body-only component. That release requires separately supplied plates to form a complete slider. The two body parts shown are not front and back plates.
03
A material change can come with a different track
Jixiang, Jiyun and Jixing share a zirconium-alloy body, but their plates, back plates and tracks differ. Compare the feedback alongside the appearance.
Time matters too. The late-2023 orange G10 Fuqi configuration came with a dense-feedback plate. The 2026 Bingwu release carries the Xiangrui motif but uses an extra-fine track described as providing 28 feedback steps. A familiar motif does not mean an unchanged track.
JI · JIXIANG
Jixiang
Dense track. A specific configuration name, rather than a label for every zirconium body.
JI · JIYUN
Jiyun
Detent track. The same body material can be paired with a different feedback pattern.
JI · JIXING
Jixing
A combination of extra-dense feedback and detents. Jixing is distinct from the name Jinxiu.
View original ↗Bingwu carries forward the Xiangrui motif. The exterior motif and the track design are separate features.View original ↗The Bingwu configuration opened up. Body, slider-block and track conditions must be checked for the particular generation.
04
Pipa: one plate, two track arrangements
Pipa is a plate component. The maker describes rotating it by 180 degrees to change between extra-dense feedback and a combination with rhythmic detents.
NATURAL PEEK
Natural PEEK
A one-piece construction, using the same track as the black PEEK configuration.
BLACK PEEK + STEEL
Black PEEK with steel
A stainless-steel inlay on the front. The exterior configuration differs; the track remains the same.
View original ↗Pipa plates in natural PEEK and black PEEK with a steel inlay. These are plate components.View original ↗A Pipa plate in hand. Its front design is distinct from the feedback track on the reverse.
Do not assume that every Lucky Draw accepts every plate. The January 2, 2026 Pipa announcement described compatibility across the then-current family. The January 18 Chuanshi announcement then described a different plate-style construction intended to preserve the continuous pattern of its specialty metals. Those designs need a separate compatibility check.
Expand: what to check before changing parts
Identify the body, slider block, track plate and any separate back plate, then check the conditions and date of the relevant announcement. A compatibility statement does not automatically cover every future release. Names such as Changdi, Guzheng and Pipa describe plates, rather than complete sliders.
05
From a name to a specific configuration
First identify whether the listing is for a complete slider, a body or a component. Then check which part uses each material, the track and what is included.
01 · OBJECT
Body or complete slider?
Tai You Xin was released as a body-only component. Its body weight and photographs are not specifications for a complete slider with plates.
02 · PART
Which part uses it?
The body, front plate, back plate and slider block may use different materials. One material name does not describe the entire assembly.
03 · FIT
Which construction?
Keep interchangeable-plate designs separate from the plate-style construction used in specialty-metal Chuanshi designs to preserve their continuous pattern. Check the conditions for the particular combination.
DESIGN THROUGH TIME
One family, changing constructions
Follow changes in bodies, tracks and components. Dates refer to documentation; these configurations do not form a single upgrade path.
wood bodies and Xiangrui plates
The initial description pairs wood bodies with metal Xiangrui plates and three detents in each sliding direction.
The advance batch and June regular release are kept separately. June documents 28 feedback steps; a distinct mechanical generation between the releases is not established.
Browse every complete-configuration record in this guide’s research scope. Names identify documented combinations; material differences, research groups and accessories do not automatically establish official editions.
Table dates refer to the documentation, not necessarily the release. Confirmed release and quantity information appears in each record.
Configuration & identifying detailsDocumentedOpen record
XiangruiDocumented series4 configuration records
An official theme series. These entries differ in their bodies and Xiangrui plate configurations.
Wufu & related configurationsDocumented series18 configuration records
Fu, Lu, Shou, Xi and Cai form an official series. This group contains 16 supported member configurations plus Jin Xiang Yu and An Xing, whose membership is not explicit.
African blackwood body with a sandblasted brass plate
View original ↗Auction specimen, front view: Xiangrui · African blackwood / sandblasted brass. An exterior reference; the photograph does not establish internal tracks or a release batch.
Edition size / quantity scope
Not confirmed in the reviewed sources
Weight
Not confirmed in the reviewed sources
Dimensions
Approx. 52 × 20 × 13 (unit not explicit in the source)
Materials & parts
African blackwood body with a sandblasted brass plate
Finishes & parts
Sandblasted brass plate
Construction / feedback
Original configuration: two-part bidirectional sliding, three detents each way and six across the full travel
Documented release / event
2023-10-19 (year from publication context); date of the documented event, not necessarily first release
Xiangrui · Red rosewood / gold-plated brass
Complete-configuration record
Xiangrui · Red rosewood / gold-plated brass
Red-rosewood body with a gold-plated brass plate
View original ↗Xiangrui · Red rosewood / gold-plated brass — auction specimen, exterior reference.
An exterior reference from a specific auction listing. It does not establish unmodified internals, release batch or edition size. Material facts follow the documented source, not image-only identification.
Edition size / quantity scope
Stated limit: 42
Weight
Not confirmed in the reviewed sources
Dimensions
Approx. 52 × 20 × 13 (unit not explicit in the source)
Materials & parts
Red-rosewood body with a gold-plated brass plate
Finishes & parts
Gold-plated brass plate
Construction / feedback
Original configuration: two-part bidirectional sliding, three detents each way and six across the full travel
Documented release / event
2023-10-19 (year from publication context); date of the documented event, not necessarily first release
Xiangrui · Polished PEI
Complete-configuration record
Xiangrui · Polished PEI
Polished PEI body with a gold-plated white-copper Xiangrui plate
View original ↗Auction specimen, front view: Xiangrui · Polished PEI. An exterior reference; the photograph does not establish internal tracks or a release batch.
Edition size / quantity scope
Stated limit: 90
Weight
Not confirmed in the reviewed sources
Dimensions
Not confirmed in the reviewed sources
Materials & parts
Polished PEI body with a gold-plated white-copper Xiangrui plate
Finishes & parts
Polished PEI body; gold-plated white-copper plate
Construction / feedback
Adds four-point track positioning compared with the wood configuration
Documented release / event
2023-12-17 20:00 (year from publication context); date of the documented event, not necessarily first release
Xiangrui · PEEK
Complete-configuration record
Xiangrui · PEEK
PEEK body with a white-copper plate
View original ↗Xiangrui · PEEK — auction specimen, exterior reference.
An exterior reference from a specific auction listing. It does not establish unmodified internals, release batch or edition size. Material facts follow the documented source, not image-only identification.
Edition size / quantity scope
Not confirmed in the reviewed sources
Weight
Not confirmed in the reviewed sources
Dimensions
Not confirmed in the reviewed sources
Materials & parts
PEEK body with a white-copper plate
Finishes & parts
Not confirmed in the reviewed sources
Documented release / event
2023-12-31 20:00; date of the documented event, not necessarily first release
Fuqi · Retro orange G10
Complete-configuration record
Fuqi · Retro orange G10
G10 body with a brass plate
View original ↗Fuqi · Retro orange G10 — auction specimen, exterior reference.
An exterior reference from a specific auction listing. It does not establish unmodified internals, release batch or edition size. Material facts follow the documented source, not image-only identification.
Edition size / quantity scope
Not confirmed in the reviewed sources
Weight
Not confirmed in the reviewed sources
Dimensions
Not confirmed in the reviewed sources
Materials & parts
G10 body with a brass plate
Finishes & parts
Not confirmed in the reviewed sources
Documented release / event
2023-12-31 20:00; date of the documented event, not necessarily first release
Luxing · G10
Complete-configuration record
Luxing · G10
Green-and-black layered G10 body with an inlaid white-copper plate
View original ↗Luxing: the green-and-black body and Lu-motif front plate.
An exterior reference from the archive. The configuration notes below follow maker documentation; the photograph does not verify hidden construction or an unmodified factory assembly.
Edition size / quantity scope
Not confirmed in the reviewed sources
Weight
Not confirmed in the reviewed sources
Dimensions
Not confirmed in the reviewed sources
Materials & parts
Green-and-black layered G10 body with an inlaid white-copper plate
Finishes & parts
Aged white-copper plate with inlay
Documented release / event
2024-04-25 20:00 (year from publication context); date of the documented event, not necessarily first release
Jin Xiang Yu · G10
Complete-configuration record
Jin Xiang Yu · G10
Jade-coloured G10 body; gold-plated brass plate with turquoise inlay
View original ↗Jin Xiang Yu · G10 — auction specimen, exterior reference.
An exterior reference from a specific auction listing. It does not establish unmodified internals, release batch or edition size. Material facts follow the documented source, not image-only identification.
Edition size / quantity scope
Not confirmed in the reviewed sources
Weight
Not confirmed in the reviewed sources
Dimensions
Not confirmed in the reviewed sources
Materials & parts
Jade-coloured G10 body; gold-plated brass plate with turquoise inlay
Finishes & parts
Gold-plated plate with turquoise inlay
Documented release / event
2024-04-25 20:00 (year from publication context); date of the documented event, not necessarily first release
Anxing · Glow configuration for VIP4
Complete-configuration record
Anxing · Glow configuration for VIP4
Honeycomb glow-material body; white-copper plate with additional glow filling
No verified photo is available for this entry yet. You can read its documented details below.
Edition size / quantity scope
Not confirmed in the reviewed sources
Weight
Not confirmed in the reviewed sources
Dimensions
Not confirmed in the reviewed sources
Materials & parts
Honeycomb glow-material body; white-copper plate with additional glow filling
Finishes & parts
Not confirmed in the reviewed sources
Documented release / event
2024-04-25 20:00 (year from publication context); date of the documented event, not necessarily first release
Caiqi · Polished PEI
Complete-configuration record
Caiqi · Polished PEI
Polished PEI body with a gold-plated brass Caiqi plate
View original ↗Auction specimen, front view: Caiqi · Polished PEI. An exterior reference; the photograph does not establish internal tracks or a release batch.
Edition size / quantity scope
Stated limit: 90
Weight
Not confirmed in the reviewed sources
Dimensions
Not confirmed in the reviewed sources
Materials & parts
Polished PEI body with a gold-plated brass Caiqi plate
Finishes & parts
Polished PEI body; gold-plated brass plate
Construction / feedback
Adds four-point track positioning compared with the wood configuration
Documented release / event
2023-12-17 20:00 (year from publication context); date of the documented event, not necessarily first release
Cai motif · Red sandalwood
Complete-configuration record
Cai motif · Red sandalwood
Red-sandalwood body with a copper Cai-motif dense-track plate
View original ↗Auction specimen, front view: Cai motif · Red sandalwood. An exterior reference; the photograph does not establish internal tracks or a release batch.
Edition size / quantity scope
Stated limit: 99
Weight
Not confirmed in the reviewed sources
Dimensions
Not confirmed in the reviewed sources
Materials & parts
Red-sandalwood body with a copper Cai-motif dense-track plate
Finishes & parts
Not confirmed in the reviewed sources
Documented release / event
2024-03-02 20:00 (year from publication context); date of the documented event, not necessarily first release
Cai motif · Snakewood
Complete-configuration record
Cai motif · Snakewood
Snakewood body with a white-copper Cai-motif plate
View original ↗A Cai-motif snakewood configuration; the wood grain varies between pieces.
An exterior reference from the archive. The configuration notes below follow maker documentation; the photograph does not verify hidden construction or an unmodified factory assembly.
Edition size / quantity scope
Stated total limit: 268; includes 80 allocated to a channel
Weight
Not confirmed in the reviewed sources
Dimensions
52 × 20 × 13 (unit not explicit in the source)
Materials & parts
Snakewood body with a white-copper Cai-motif plate
Finishes & parts
Not confirmed in the reviewed sources
Construction / feedback
POM slider block; dense plate with 12 steps across the travel
Documented release / event
2024-05-13 20:00 (year from publication context); date of the documented event, not necessarily first release
Caiyun · Purple-and-black G10
Complete-configuration record
Caiyun · Purple-and-black G10
G10 body with an aged white-copper Cai-motif plate
View original ↗Caiyun: a purple-and-black G10 body with an aged white-copper Cai-motif plate.
Edition size / quantity scope
Announced total: 495; not a lifetime edition total
Weight
Not confirmed in the reviewed sources
Dimensions
Not confirmed in the reviewed sources
Materials & parts
G10 body with an aged white-copper Cai-motif plate
Finishes & parts
Not confirmed in the reviewed sources
Construction / feedback
Six steps in one direction and eleven across the full travel, as described for this configuration
Documented release / event
2026-02-10 20:00; date of the documented event, not necessarily first release
Xi · Desert ironwood / aged brass with copper inlays
Complete-configuration record
Xi · Desert ironwood / aged brass with copper inlays
Desert-ironwood body; aged brass plate inlaid with copper beads
View original ↗Auction specimen, front view: Xi · Desert ironwood / aged brass with copper inlays. An exterior reference; the photograph does not establish internal tracks or a release batch.
Edition size / quantity scope
Stated permanent limit: 96
Weight
Not confirmed in the reviewed sources
Dimensions
Not confirmed in the reviewed sources
Materials & parts
Desert-ironwood body; aged brass plate inlaid with copper beads
Finishes & parts
Aged brass plate with copper-bead inlays
Construction / feedback
Dense track with twelve steps across the full travel
Documented release / event
2025-01-07 20:00; date of the documented event, not necessarily first release
Xi · Desert ironwood / aged copper with brass inlays
Complete-configuration record
Xi · Desert ironwood / aged copper with brass inlays
Desert-ironwood body; aged copper plate inlaid with brass beads
View original ↗Xi · Desert ironwood / aged copper with brass inlays — auction specimen, exterior reference.
An exterior reference from a specific auction listing. It does not establish unmodified internals, release batch or edition size. Material facts follow the documented source, not image-only identification.
Edition size / quantity scope
Stated permanent limit: 48
Weight
Not confirmed in the reviewed sources
Dimensions
Not confirmed in the reviewed sources
Materials & parts
Desert-ironwood body; aged copper plate inlaid with brass beads
Finishes & parts
Aged copper plate with brass-bead inlays
Construction / feedback
Dense track with twelve steps across the full travel
Documented release / event
2025-01-07 20:00; date of the documented event, not necessarily first release
Xi · Desert ironwood / gold-plated brass
Complete-configuration record
Xi · Desert ironwood / gold-plated brass
Desert-ironwood body; brass plate sandblasted, surface-polished and gold-plated
View original ↗Xi · Desert ironwood / gold-plated brass — auction specimen, exterior reference.
An exterior reference from a specific auction listing. It does not establish unmodified internals, release batch or edition size. Material facts follow the documented source, not image-only identification.
Edition size / quantity scope
Stated permanent limit: 187
Weight
Not confirmed in the reviewed sources
Dimensions
Not confirmed in the reviewed sources
Materials & parts
Desert-ironwood body; brass plate sandblasted, surface-polished and gold-plated
Finishes & parts
Brass plate: sandblasting, surface polishing, then gold plating
Construction / feedback
Dense track with twelve steps across the full travel
Documented release / event
2025-01-07 20:00; date of the documented event, not necessarily first release
Xiqi · G10 / brass
Complete-configuration record
Xiqi · G10 / brass
G10 body with a brass Xi-motif plate
View original ↗Xiqi · G10 / brass — auction specimen, exterior reference.
An exterior reference from a specific auction listing. It does not establish unmodified internals, release batch or edition size. Material facts follow the documented source, not image-only identification.
Edition size / quantity scope
Stated limit: 200
Weight
Not confirmed in the reviewed sources
Dimensions
Not confirmed in the reviewed sources
Materials & parts
G10 body with a brass Xi-motif plate
Finishes & parts
Not confirmed in the reviewed sources
Documented release / event
2025-01-20 20:00; date of the documented event, not necessarily first release
Xiqi · G10 / copper
Complete-configuration record
Xiqi · G10 / copper
G10 body with a copper Xi-motif plate
View original ↗Xiqi · G10 / copper — auction specimen, exterior reference.
An exterior reference from a specific auction listing. It does not establish unmodified internals, release batch or edition size. Material facts follow the documented source, not image-only identification.
Edition size / quantity scope
Stated limit: 160
Weight
Not confirmed in the reviewed sources
Dimensions
Not confirmed in the reviewed sources
Materials & parts
G10 body with a copper Xi-motif plate
Finishes & parts
Not confirmed in the reviewed sources
Documented release / event
2025-01-20 20:00; date of the documented event, not necessarily first release
Shou · Daye Zitan wood / brass with copper inlays
Complete-configuration record
Shou · Daye Zitan wood / brass with copper inlays
Daye Zitan wood body; brass plate inlaid with copper beads
View original ↗Shou · Daye Zitan wood / brass with copper inlays — auction specimen, exterior reference.
An exterior reference from a specific auction listing. It does not establish unmodified internals, release batch or edition size. Material facts follow the documented source, not image-only identification.
Edition size / quantity scope
Stated permanent limit: 95
Weight
Not confirmed in the reviewed sources
Dimensions
Not confirmed in the reviewed sources
Materials & parts
Daye Zitan wood body; brass plate inlaid with copper beads
Finishes & parts
Brass plate with copper-bead inlays
Construction / feedback
Dense track with twelve steps across the full travel
Documented release / event
2025-07-27 20:00; date of the documented event, not necessarily first release
Shou · Daye Zitan wood / aged copper with brass inlays
Complete-configuration record
Shou · Daye Zitan wood / aged copper with brass inlays
Daye Zitan wood body; aged copper plate inlaid with brass beads
View original ↗Shou · Daye Zitan wood / aged copper with brass inlays — auction specimen, exterior reference.
An exterior reference from a specific auction listing. It does not establish unmodified internals, release batch or edition size. Material facts follow the documented source, not image-only identification.
Edition size / quantity scope
Stated permanent limit: 180
Weight
Not confirmed in the reviewed sources
Dimensions
Not confirmed in the reviewed sources
Materials & parts
Daye Zitan wood body; aged copper plate inlaid with brass beads
Finishes & parts
Aged copper plate with brass-bead inlays
Construction / feedback
Dense track with twelve steps across the full travel
Documented release / event
2025-07-27 20:00; date of the documented event, not necessarily first release
Shou · Daye Zitan wood / gold-plated brass
Complete-configuration record
Shou · Daye Zitan wood / gold-plated brass
Daye Zitan wood body; brass plate sandblasted, surface-polished and gold-plated
View original ↗Auction specimen, front view: Shou · Daye Zitan wood / gold-plated brass. An exterior reference; the photograph does not establish internal tracks or a release batch.
Edition size / quantity scope
Stated permanent limit: 80
Weight
Not confirmed in the reviewed sources
Dimensions
Not confirmed in the reviewed sources
Materials & parts
Daye Zitan wood body; brass plate sandblasted, surface-polished and gold-plated
Finishes & parts
Brass plate: sandblasting, surface polishing, then gold plating
Construction / feedback
Dense track with twelve steps across the full travel
Documented release / event
2025-07-27 20:00; date of the documented event, not necessarily first release
Shou · G10 / white copper
Complete-configuration record
Shou · G10 / white copper
G10 body with a white-copper plate
View original ↗Official Shou photograph. The foreground item on the right shows the G10 body and white-copper Shou plate; the blurred item behind it is not used to identify this configuration.
Edition size / quantity scope
Stated total limit: 358
Weight
Not confirmed in the reviewed sources
Dimensions
Not confirmed in the reviewed sources
Materials & parts
G10 body with a white-copper plate
Finishes & parts
Not confirmed in the reviewed sources
Documented release / event
2025-09-27 20:00; date of the documented event, not necessarily first release
Shou · Carbon quartz / gold-plated plate
Complete-configuration record
Shou · Carbon quartz / gold-plated plate
Carbon-quartz body; the base metal of the gold-plated plate is not established
View original ↗Shou: a blue carbon-quartz body with a gold-plated plate.
An exterior reference from the archive. The configuration notes below follow maker documentation; the photograph does not verify hidden construction or an unmodified factory assembly.
Edition size / quantity scope
Stated total limit: 95
Weight
Not confirmed in the reviewed sources
Dimensions
Not confirmed in the reviewed sources
Materials & parts
Carbon-quartz body; the base metal of the gold-plated plate is not established
Finishes & parts
Not confirmed in the reviewed sources
Documented release / event
2025-09-27 20:00; date of the documented event, not necessarily first release
Jixiang · Zirconium-alloy body / dense track
Complete-configuration record
Jixiang · Zirconium-alloy body / dense track
Zirconium-alloy body, stainless-steel front plate and African-blackwood rear plate
View original ↗Auction specimen, front view: Jixiang · Zirconium-alloy body / dense track. An exterior reference; the photograph does not establish internal tracks or a release batch.
Edition size / quantity scope
Not confirmed in the reviewed sources
Weight
Not confirmed in the reviewed sources
Dimensions
Not confirmed in the reviewed sources
Materials & parts
Zirconium-alloy body, stainless-steel front plate and African-blackwood rear plate
Finishes & parts
Fine stonewashed and blackened body; sandblasted front plate
Construction / feedback
Dense track
Documented release / event
2024-08-29 20:00 (year from publication context); date of the documented event, not necessarily first release
Jiyun · Zirconium-alloy body / detent track
Complete-configuration record
Jiyun · Zirconium-alloy body / detent track
Zirconium-alloy body, brass front plate and African-blackwood rear plate
View original ↗The front of Jiyun; track information is documented separately.
An exterior reference from the archive. The configuration notes below follow maker documentation; the photograph does not verify hidden construction or an unmodified factory assembly.
Edition size / quantity scope
Not confirmed in the reviewed sources
Weight
Not confirmed in the reviewed sources
Dimensions
Not confirmed in the reviewed sources
Materials & parts
Zirconium-alloy body, brass front plate and African-blackwood rear plate
Finishes & parts
Polished and blackened body, with a small randomly coloured batch; lightly polished aged front plate
Construction / feedback
Detent track
Documented release / event
2024-08-29 20:00 (year from publication context); date of the documented event, not necessarily first release
Jixing · Mixed extra-dense and detent track
Complete-configuration record
Jixing · Mixed extra-dense and detent track
Zirconium-alloy body, stainless-steel front plate with brass inlay, and red-sandalwood rear plate
View original ↗Jixing front, with contrasting metal inlays. Auction specimen shown as an exterior reference.
An exterior reference from a specific auction listing. It does not establish unmodified internals, release batch or edition size. Material facts follow the documented source, not image-only identification.
Edition size / quantity scope
Stated limit: 398
Weight
Not confirmed in the reviewed sources
Dimensions
Not confirmed in the reviewed sources
Materials & parts
Zirconium-alloy body, stainless-steel front plate with brass inlay, and red-sandalwood rear plate
Finishes & parts
Fine stonewashed and blackened body; sandblasted and inlaid front plate
Construction / feedback
Mixed extra-dense and detent track
Documented release / event
2024-08-29 20:00 (year from publication context); date of the documented event, not necessarily first release
YOLO · Ji Shi Xing Le advance release
Complete-configuration record
YOLO · Ji Shi Xing Le advance release
Zirconium-alloy body, gold-plated brass front plate and blackwood rear plate
View original ↗YOLO Ji Shi Xing Le front and dark outer frame. An auction exterior reference; the photo does not identify an advance batch.
An exterior reference from a specific auction listing. It does not establish unmodified internals, release batch or edition size. Material facts follow the documented source, not image-only identification.
Edition size / quantity scope
Stated limit: 99
Weight
Not confirmed in the reviewed sources
Dimensions
Not confirmed in the reviewed sources
Materials & parts
Zirconium-alloy body, gold-plated brass front plate and blackwood rear plate
Finishes & parts
Not confirmed in the reviewed sources
Documented release / event
2024-06-22 20:00 (year from publication context); date of the documented event, not necessarily first release
Jixiang–Guyun · Engraved collaboration
Complete-configuration record
Jixiang–Guyun · Engraved collaboration
Dense track with small, shallow end grooves; PEEK slider block
View original ↗Guyun front, showing the bronze-vessel motif and red character inlays. Auction exterior reference.
An exterior reference from a specific auction listing. It does not establish unmodified internals, release batch or edition size. Material facts follow the documented source, not image-only identification.
Edition size / quantity scope
Announced quantity: 75; not a lifetime edition total
Weight
Not confirmed in the reviewed sources
Dimensions
Not confirmed in the reviewed sources
Materials & parts
Not confirmed in the reviewed sources
Finishes & parts
Not confirmed in the reviewed sources
Construction / feedback
Dense track with small, shallow end grooves; PEEK slider block
Documented release / event
2024-08-18 20:00 (year from publication context); date of the documented event, not necessarily first release
Ruyi–Jinxiu · Engraved collaboration
Complete-configuration record
Ruyi–Jinxiu · Engraved collaboration
Dense track with small, shallow end grooves; PEEK slider block
View original ↗Jinxiu front, with its combined character motif, cloud scrolls and end details. Auction exterior reference.
An exterior reference from a specific auction listing. It does not establish unmodified internals, release batch or edition size. Material facts follow the documented source, not image-only identification.
Edition size / quantity scope
Announced quantity: 75; not a lifetime edition total
Weight
Not confirmed in the reviewed sources
Dimensions
Not confirmed in the reviewed sources
Materials & parts
Not confirmed in the reviewed sources
Finishes & parts
Not confirmed in the reviewed sources
Construction / feedback
Dense track with small, shallow end grooves; PEEK slider block
Documented release / event
2024-08-18 20:00 (year from publication context); date of the documented event, not necessarily first release
Jixiang–Qinfeng · Engraved collaboration
Complete-configuration record
Jixiang–Qinfeng · Engraved collaboration
Dense track with small, shallow end grooves; PEEK slider block
View original ↗Auction specimen, front view: Jixiang–Qinfeng · Engraved collaboration. An exterior reference; the photograph does not establish internal tracks or a release batch.
Edition size / quantity scope
Announced quantity: 48; not a lifetime edition total
Weight
Not confirmed in the reviewed sources
Dimensions
Not confirmed in the reviewed sources
Materials & parts
Not confirmed in the reviewed sources
Finishes & parts
Not confirmed in the reviewed sources
Construction / feedback
Dense track with small, shallow end grooves; PEEK slider block
Documented release / event
2024-08-18 20:00 (year from publication context); date of the documented event, not necessarily first release
So YOUNG · Ruilong
Complete-configuration record
So YOUNG · Ruilong
Titanium-alloy body with engraved white-copper, copper and brass inlays
View original ↗Auction specimen, front view: So YOUNG · Ruilong. An exterior reference; the photograph does not establish internal tracks or a release batch.
Edition size / quantity scope
Release quantity: 80; not a lifetime edition total
Weight
46 g, complete piece
Dimensions
Not confirmed in the reviewed sources
Materials & parts
Titanium-alloy body with engraved white-copper, copper and brass inlays
Finishes & parts
Engraved white-copper, copper and brass inlays
Documented release / event
2024-12-24 20:00 (year from publication context); date of the documented event, not necessarily first release
C.DEER · Jin Xiu Yue Li
Complete-configuration record
C.DEER · Jin Xiu Yue Li
Titanium-alloy body with 24K gold inlay
View original ↗Front and rear views of two C.DEER designs. Jin Xiu Yue Li occupies the left pair; He Li Ying Fu the right pair. Four views, two designs.
Official exterior views of the named designs. Multiple views do not create additional editions or establish internal mechanisms.
Edition size / quantity scope
One-off piece: 1
Weight
About 46 g, complete piece
Dimensions
Not confirmed in the reviewed sources
Materials & parts
Titanium-alloy body with 24K gold inlay
Finishes & parts
Hand-carved gold work; gold inlay recorded for this specific configuration
Documented release / event
2025-08-30 20:00 (year from publication context); date of the documented event, not necessarily first release
C.DEER · He Li Ying Fu
Complete-configuration record
C.DEER · He Li Ying Fu
Titanium-alloy body with 24K gold inlay
View original ↗The crane and carp sides of He Li Ying Fu. Two views of one design.
Official exterior views of the named designs. Multiple views do not create additional editions or establish internal mechanisms.
Edition size / quantity scope
One-off piece: 1
Weight
About 46 g, complete piece
Dimensions
Not confirmed in the reviewed sources
Materials & parts
Titanium-alloy body with 24K gold inlay
Finishes & parts
Hand-carved gold work; gold inlay recorded for this specific configuration
Documented release / event
2025-08-30 20:00 (year from publication context); date of the documented event, not necessarily first release
Third anniversary · Sandblasted steel / PEEK
Complete-configuration record
Third anniversary · Sandblasted steel / PEEK
Sandblasted steel paired with PEEK
View original ↗Official photograph of the third-anniversary sandblasted-steel / PEEK configuration, with a light anniversary plate and grey metal body.
Edition size / quantity scope
Stated limit: 288
Weight
About 60 g in the shared anniversary description; no separate weight for each configuration
Dimensions
Not confirmed in the reviewed sources
Materials & parts
Sandblasted steel paired with PEEK
Finishes & parts
Sandblasted steel components
Construction / feedback
Non-standard ball grooves on an updated Jixing-derived track; step count not established
Documented release / event
2025-08-24 20:00; date of the documented event, not necessarily first release
Third anniversary · Polished steel / PEI
Complete-configuration record
Third anniversary · Polished steel / PEI
Polished steel paired with PEI
View original ↗The third-anniversary steel-and-PEI configuration, viewed from the front.
An exterior reference from the archive. The configuration notes below follow maker documentation; the photograph does not verify hidden construction or an unmodified factory assembly.
Edition size / quantity scope
Stated limit: 199
Weight
About 60 g in the shared anniversary description; no separate weight for each configuration
Dimensions
Not confirmed in the reviewed sources
Materials & parts
Polished steel paired with PEI
Finishes & parts
Polished steel components
Construction / feedback
Non-standard ball grooves on an updated Jixing-derived track; step count not established
Documented release / event
2025-08-24 20:00; date of the documented event, not necessarily first release
Tongyun · Translucent black / white copper
Complete-configuration record
Tongyun · Translucent black / white copper
Translucent-black copper-wire/resin body with a white-copper plate
View original ↗Rear view of translucent-black Tongyun with a metal sticker. The white-copper front plate is not shown, so this is a partial exterior reference.
Rear view of translucent-black Tongyun with a metal sticker. The white-copper front plate is not shown, so this is a partial exterior reference. An exterior reference from a specific auction listing. It does not establish unmodified internals, release batch or edition size. Material facts follow the documented source, not image-only identification.
Edition size / quantity scope
Not confirmed in the reviewed sources
Weight
Not confirmed in the reviewed sources
Dimensions
Not confirmed in the reviewed sources
Materials & parts
Translucent-black copper-wire/resin body with a white-copper plate
Finishes & parts
Not confirmed in the reviewed sources
Construction / feedback
Detent mode, three steps each way and six in total; revised four-point positioning
Documented release / event
2025-04-27 20:00 (year from publication context); date of the documented event, not necessarily first release
Tongyun · Huoqi red / copper
Complete-configuration record
Tongyun · Huoqi red / copper
Huoqi-red copper-wire/resin body with a copper plate
View original ↗Huoqi-red Tongyun front, with a translucent red body and copper-coloured cloud-pattern plate. Auction exterior reference.
An exterior reference from a specific auction listing. It does not establish unmodified internals, release batch or edition size. Material facts follow the documented source, not image-only identification.
Edition size / quantity scope
Not confirmed in the reviewed sources
Weight
Not confirmed in the reviewed sources
Dimensions
Not confirmed in the reviewed sources
Materials & parts
Huoqi-red copper-wire/resin body with a copper plate
Finishes & parts
Not confirmed in the reviewed sources
Construction / feedback
Detent mode, three steps each way and six in total; revised four-point positioning
Documented release / event
2025-04-27 20:00 (year from publication context); date of the documented event, not necessarily first release
Chuanshi · Stone-textured zirconium alloy
Complete-configuration record
Chuanshi · Stone-textured zirconium alloy
Zirconium alloy throughout, except for the internal slider block
View original ↗Stone-textured Chuanshi, rear view. A partial auction exterior reference showing the layered-rock engraving; the front and internals are not shown.
Stone-textured Chuanshi, rear view. A partial auction exterior reference showing the layered-rock engraving; the front and internals are not shown. An exterior reference from a specific auction listing. It does not establish unmodified internals, release batch or edition size. Material facts follow the documented source, not image-only identification.
Edition size / quantity scope
Stated limit: 80; includes 40 allocated to the show
Weight
Not confirmed in the reviewed sources
Dimensions
Not confirmed in the reviewed sources
Materials & parts
Zirconium alloy throughout, except for the internal slider block
Finishes & parts
Stone-texture surface engraving
Construction / feedback
Detent track
Chuanshi · Twisted-pattern Zircuti
Complete-configuration record
Chuanshi · Twisted-pattern Zircuti
Zircuti body, stainless-steel slider block and PEI track liner
View original ↗Auction specimen of twisted-pattern Zircuti Chuanshi, front view. The pattern varies by piece; this photograph does not establish a batch, internal structure or edition size.
Edition size / quantity scope
Stated limit: 99
Weight
Not confirmed in the reviewed sources
Dimensions
Not confirmed in the reviewed sources
Materials & parts
Zircuti body, stainless-steel slider block and PEI track liner
Finishes & parts
Polished surface
Construction / feedback
Integrated plate-like exterior, extra-dense feedback and single-ball/double-ball slider blocks
Documented release / event
2026-01-19 (year from publication context); date of the documented event, not necessarily first release
Bingwu · Shanghai advance batch
Complete-configuration record
Bingwu · Shanghai advance batch
Titanium alloy and PEI; the source poster does not assign each material to a component
View original ↗Bingwu exterior reference from an auction listing described as an advance release. The photograph alone does not establish a show batch or production quantity.
An exterior reference from a specific auction listing. It does not establish unmodified internals, release batch or edition size. Material facts follow the documented source, not image-only identification.
Edition size / quantity scope
Advance-batch quantity: 150; includes 50 allocated to the show; not a lifetime edition total
Weight
Not confirmed in the reviewed sources
Dimensions
Not confirmed in the reviewed sources
Materials & parts
Titanium alloy and PEI; the source poster does not assign each material to a component
Finishes & parts
Not confirmed in the reviewed sources
Bingwu · June regular release
Complete-configuration record
Bingwu · June regular release
Finer track with 28 feedback steps; documented in the June regular-release article.
View original ↗The 2026 Bingwu configuration, shown in hand.View original ↗Bingwu carries forward the Xiangrui motif. The exterior motif and the track design are separate features.View original ↗The Bingwu configuration opened up. Body, slider-block and track conditions must be checked for the particular generation.
Edition size / quantity scope
Not confirmed in the reviewed sources
Weight
Not confirmed in the reviewed sources
Dimensions
Not confirmed in the reviewed sources
Materials & parts
Not confirmed in the reviewed sources
Finishes & parts
Not confirmed in the reviewed sources
Construction / feedback
Finer track with 28 feedback steps; documented in the June regular-release article.
Documented release / event
2026-06-09 20:00; date of the documented event, not necessarily first release
Front plate, rear plate and slider block
Bodies & components
Front plate, rear plate and slider block
Front plate, rear plate and slider block are separate component roles.
No verified photo is available for this entry yet. You can read its documented details below.
Record scope
Front plate, rear plate and slider block are separate component roles.
Changdi · Detent plate
Bodies & components
Changdi · Detent plate
Changdi detent plate; a plate component.
No verified photo is available for this entry yet. You can read its documented details below.
Record scope
Changdi detent plate; a plate component.
Documented release / event
2024-04-25 20:00 (year from publication context); date of the documented event, not necessarily first release
Guzheng · Track plate
Bodies & components
Guzheng · Track plate
Guzheng plate, described with an original bar-shaped track.
No verified photo is available for this entry yet. You can read its documented details below.
Record scope
Guzheng plate, described with an original bar-shaped track.
Pipa · Natural PEEK plate
Bodies & components
Pipa · Natural PEEK plate
Natural PEEK in a one-piece construction
View original ↗Pipa plates in natural PEEK and black PEEK with a steel inlay. These are plate components.View original ↗A Pipa plate in hand. Its front design is distinct from the feedback track on the reverse.
Material scope
Natural PEEK in a one-piece construction
Construction / feedback
A 180-degree reversal selects extra-dense feedback or extra-dense feedback combined with rhythmic detents
Documented release / event
2026-01-04 20:00 (year from publication context); date of the documented event, not necessarily first release
Compatibility
The 2 Jan 2026 article states compatibility across the range; later special-material constructions require separate checks. This is not a claim of physical testing on every configuration.
Pipa · Black PEEK plate with steel inlay
Bodies & components
Pipa · Black PEEK plate with steel inlay
Black PEEK with a stainless-steel front inlay
View original ↗Pipa plates in natural PEEK and black PEEK with a steel inlay. These are plate components.View original ↗A Pipa plate in hand. Its front design is distinct from the feedback track on the reverse.
Material scope
Black PEEK with a stainless-steel front inlay
Construction / feedback
A 180-degree reversal selects extra-dense feedback or extra-dense feedback combined with rhythmic detents
Finish
Stainless-steel front inlay
Documented release / event
2026-01-04 20:00 (year from publication context); date of the documented event, not necessarily first release
Compatibility
The 2 Jan 2026 article states compatibility across the range; later special-material constructions require separate checks. This is not a claim of physical testing on every configuration.
PEI · Longitudinal-wave dense plate
Bodies & components
PEI · Longitudinal-wave dense plate
PEI plate; brass tips belong to the accompanying parts pack
No verified photo is available for this entry yet. You can read its documented details below.
Material scope
PEI plate; brass tips belong to the accompanying parts pack
Finish
Polished PEI plate
Documented quantity
Quantity offered in this release: 142; not a lifetime edition total
Documented release / event
2024-07-09 20:00; date of the documented event, not necessarily first release
PEI · Diagonal-wave detent plate
Bodies & components
PEI · Diagonal-wave detent plate
PEI plate; brass tips belong to the accompanying parts pack
No verified photo is available for this entry yet. You can read its documented details below.
Material scope
PEI plate; brass tips belong to the accompanying parts pack
Finish
Polished PEI plate
Documented quantity
Quantity offered in this release: 138; not a lifetime edition total
Documented release / event
2024-07-09 20:00; date of the documented event, not necessarily first release
Black Warrior · Front-and-rear plate set
Accessory sets
Black Warrior · Front-and-rear plate set
PEI
No verified photo is available for this entry yet. You can read its documented details below.
Material scope
PEI
Finish
CNC engraving, etching, then surface polishing
Documented quantity
Total offered in this release: 148; not a lifetime edition total
Documented release / event
2024-12-23 20:00 (year from publication context); date of the documented event, not necessarily first release
Patterned G10 · Diagonal plate set
Accessory sets
Patterned G10 · Diagonal plate set
Patterned G10
No verified photo is available for this entry yet. You can read its documented details below.
Material scope
Patterned G10
Documented quantity
Total offered in this release: 50; not a lifetime edition total
Documented release / event
2024-12-23 20:00 (year from publication context); date of the documented event, not necessarily first release
Patterned G10 · Straight-pattern plate set
Accessory sets
Patterned G10 · Straight-pattern plate set
Patterned G10
No verified photo is available for this entry yet. You can read its documented details below.
Material scope
Patterned G10
Documented quantity
Total offered in this release: 50; not a lifetime edition total
Documented release / event
2024-12-23 20:00 (year from publication context); date of the documented event, not necessarily first release
Zircuti · front/rear plates and Changdi plate
Bodies & components
Zircuti · front/rear plates and Changdi plate
A 2024 component record for Zircuti front/rear plates and the Changdi plate; not a complete configuration.
No verified photo is available for this entry yet. You can read its documented details below.
Record scope
A 2024 component record for Zircuti front/rear plates and the Changdi plate; not a complete configuration.
Tai You Xin · Matte titanium body
Bodies & components
Tai You Xin · Matte titanium body
Matte titanium body with slider block and screws; front and rear plates are separate.
View original ↗Tai You Xin body components and single-hole and double-hole slider blocks. This is not a front-and-back plate set.View original ↗Inside the opened Tai You Xin body. This photograph does not indicate that plates are included in the sale.
Configuration
Matte titanium body with slider block and screws; front and rear plates are separate.
Matte body; polished and laser-hardened track; pre-fitted Teflon contact treatment.
Weight and scope
32 g, body only
Documented release / event
2026-04-07 20:00 (year from publication context); date of the documented event, not necessarily first release
Tai You Xin · Polished titanium body
Bodies & components
Tai You Xin · Polished titanium body
Polished titanium body with slider block and screws; front and rear plates are separate.
View original ↗Tai You Xin body components and single-hole and double-hole slider blocks. This is not a front-and-back plate set.View original ↗Inside the opened Tai You Xin body. This photograph does not indicate that plates are included in the sale.
Configuration
Polished titanium body with slider block and screws; front and rear plates are separate.
Polished body; polished and laser-hardened track; pre-fitted Teflon contact treatment.
Weight and scope
32 g, body only
Documented release / event
2026-04-07 20:00 (year from publication context); date of the documented event, not necessarily first release
POM body
Bodies & components
POM body
POM body with an integrated rear plate-like form; front plate is separate.
No verified photo is available for this entry yet. You can read its documented details below.
Configuration
POM body with an integrated rear plate-like form; front plate is separate.
Construction / feedback
Integrated rear plate-like form, rather than an ordinary removable rear plate
Weight and scope
12 g, body only
Documented release / event
2026-04-07 20:00 (year from publication context); date of the documented event, not necessarily first release
Bakelite body
Bodies & components
Bakelite body
Bakelite as named in the source; formulation not specified
No verified photo is available for this entry yet. You can read its documented details below.
Material scope
Bakelite as named in the source; formulation not specified
Qi Shang · Fitted storage cases
Dedicated storage
Qi Shang · Fitted storage cases
Qi Shang is a fitted storage-case record, not a complete Lucky Draw slider.
No verified photo is available for this entry yet. You can read its documented details below.
Record scope
Qi Shang is a fitted storage-case record, not a complete Lucky Draw slider.
Yuanman · 28-slot storage case
Dedicated storage
Yuanman · 28-slot storage case
Yuanman storage case accommodates 28 Lucky Draw sliders.
No verified photo is available for this entry yet. You can read its documented details below.
Record scope
Yuanman storage case accommodates 28 Lucky Draw sliders.
GD EDC × nini · Slider carrying case
Dedicated storage
GD EDC × nini · Slider carrying case
GD EDC × nini carrying case with a 4+5 layout for nine slim sliders.
No verified photo is available for this entry yet. You can read its documented details below.
Configuration
GD EDC × nini carrying case with a 4+5 layout for nine slim sliders.
Documented quantity
Show allocation: 80; not a lifetime edition total
Fu/Ji cards and verification benefits
Credentials & entitlements
Fu/Ji cards and verification benefits
Cards supplied with products and associated verification benefits; not slider configurations.
No verified photo is available for this entry yet. You can read its documented details below.
Record scope
Cards supplied with products and associated verification benefits; not slider configurations.
Storage · Transparent-cover update, 2025
Dedicated storage
Storage · Transparent-cover update, 2025
The documented 2025 transparent-cover storage update.
No verified photo is available for this entry yet. You can read its documented details below.
Record scope
The documented 2025 transparent-cover storage update.
Documented release / event
2025-10-19 20:00 (year from publication context); date of the documented event, not necessarily first release
Storage · Small covered-case update, 2026
Dedicated storage
Storage · Small covered-case update, 2026
The documented 2026 addition of a lid to the small storage case.
No verified photo is available for this entry yet. You can read its documented details below.
Record scope
The documented 2026 addition of a lid to the small storage case.
Documented release / event
2026-09-01 20:00 (year from publication context); date of the documented event, not necessarily first release
Spice Pin · Acrylic display case, related-family record
Storage associated with another family
Spice Pin · Acrylic display case, related-family record
Acrylic display case for Spice Pin tracks; retained as a related-family record.
No verified photo is available for this entry yet. You can read its documented details below.
Material scope
Acrylic display case for Spice Pin tracks; retained as a related-family record.
Finish
Polished
Documented quantity
This preorder cap: 50; not a lifetime edition total
Documented release / event
2026-09-01 20:00 (year from publication context); date of the documented event, not necessarily first release
Third anniversary · PEEK plate-set giveaway
Accessory sets
Third anniversary · PEEK plate-set giveaway
Front and rear plates; complete body not included
No verified photo is available for this entry yet. You can read its documented details below.
Configuration
Front and rear plates; complete body not included
Documented quantity
Giveaway allocation: 10; not a lifetime edition total
Documented release / event
2025-08-25 20:00 (year from publication context); date of the documented event, not necessarily first release
Bingwu · Plate-set giveaway
Accessory sets
Bingwu · Plate-set giveaway
Bingwu plate-set giveaway; materials and the exact set contents are not specified in that passage.
No verified photo is available for this entry yet. You can read its documented details below.
Record scope
Bingwu plate-set giveaway; materials and the exact set contents are not specified in that passage.
Documented quantity
Giveaway allocation: 4; not a lifetime edition total
Expand: compare 12 selected examples
Find the differences
Explore documented configurations, with bodies and plates listed separately. This selection is not an exhaustive official edition list or a stock list. Select two entries to compare them side by side.
No verified image
Xiangrui · African blackwood / sandblasted brass
Date not recorded in this entryDetails
Configuration · Documented 2023-10-16
Body
African blackwood body
Plate
Sandblasted brass Xiangrui plate
Feedback / play
Bidirectional sliding; three detents each way, six over the full travel
What to notice
The original wood-and-metal configuration introduces the body-and-track-plate design.
No verified image
Fuqi · Orange G10 dense-track configuration
Date not recorded in this entryDetails
Configuration · Documented 2023-12-30
Body
Retro orange-and-black G10 body
Plate
Brass plate with an aged, two-tone appearance
Feedback / play
Dense-feedback track
What to notice
G10 describes the body material; dense describes the track feedback.
No verified image
Jixiang · Zirconium-alloy body / dense track
Date not recorded in this entryDetails
Configuration · Documented 2024-08-26
Body
Fine stonewashed, blackened zirconium-alloy body; African blackwood rear plate
Plate
Fine sandblasted stainless-steel front plate
Feedback / play
Dense track
What to notice
Shares a zirconium-alloy body format with Jiyun and Jixing, while using a different track.
Tai You Xin body components and single-hole and double-hole slider blocks. This is not a front-and-back plate set.
Details
Body component
Object / contents
Body only; plates are required separately.
Construction / use
Includes a double-hole block and an additional single-hole block. Described in the April 2026 release.
Tai You Xin body components and single-hole and double-hole slider blocks. This is not a front-and-back plate set.
No configurations match. Clear the search to start again.
REQUEST A CONFIGURATION OR PART
Looking for Lucky Draw?
Share the edition, material or part you are looking for, and include a reference-image link if available. We will clarify your request; availability, condition and price are confirmed separately.
View original ↗
View original ↗
View original ↗
View original ↗
View original ↗
View original ↗
View original ↗
View original ↗
View original ↗
View original ↗
View original ↗
View original ↗
GD EDC
View original ↗
View original ↗
View original ↗
View original ↗
View original ↗
View original ↗
View original ↗
View original ↗
View original ↗
View original ↗
View original ↗
View original ↗
View original ↗
View original ↗
View original ↗
View original ↗
View original ↗
View original ↗
View original ↗
View original ↗
View original ↗
View original ↗
View original ↗
View original ↗
View original ↗
View original ↗
View original ↗
View original ↗
View original ↗
View original ↗
View original ↗
View original ↗
View original ↗
