JUZHEDCJUZHEDC
JUZHEDC FAMILY ARCHIVE

JUZHEDC Infinity Edition and Mechanism Guide

An offset face reveals twin guide channels and round magnet positions. Beads support the two halves and maintain a small gap even when their ends align.

TRB Creation · 2026-11-19

Family facts
Studio JUZHEDC
Documented hosts 8
Separate accessory records 3
Host materials Stainless steel, Titanium, Zirconium, G10 fiberglass laminate

JUZHEDC introduced Infinity as its first metal slider. Its March 2022 demonstration shows steel, titanium and zirconium. On April 23 the studio confirmed that all three materials had shipped. Later studio-shop listings distinguish 1.0 and 2.0 PTFE films. Sales catalogs separately picture the additional metal finishes and the A and B G10 options.

How the editions were identified

JUZHEDC’s original notice, studio demonstration and generation-specific film listings, supplemented by individually photographed catalog variants.

FAMILY ARCHIVE

Editions & configurations

8 complete-configuration records

An offset face reveals twin guide channels and round magnet positions. Beads support the two halves and maintain a small gap even when their ends align.

Original ceramic stonewashBrowse group3 configuration recordsJUZHEDC’s chart gives separate weights for steel, titanium and zirconium.
Additional metal finishesBrowse group3 configuration recordsNamed product variants document polished metals and blue anodized titanium.
Cataloged G10 configurationsBrowse group2 configuration recordsRetail catalogs name and photograph Models A and B individually. The original studio chart covers metal only.
TRB WIKI VERIFIED SPECIFICATION

Documented points

Infinity halves, paired bead channels and magnet positions

A longitudinal channel runs down each side of the inner face. The beads carry the contact, keeping the broad metal faces apart as they travel.

Round magnet positions run along the center. As the halves overlap, magnetic attraction draws them back into registration.

The studio illustrates two stages with ten beads and three stages with six. The bead count changes the detent sequence, while the mass of each shell alters the sensation on return.

01

How the movement feels

Shallow hollows at the sides give the thumb a seat. Raised ends and diagonal face grooves offer a purchase for the fingers. Magnets draw the halves back together, while beads support them along two parallel channels and preserve a gap between the broad faces. JUZHEDC describes a soft, trembling rebound.

A longitudinal channel runs down each side of the inner face. The beads carry the contact, keeping the broad metal faces apart as they travel.

Infinity halves, paired bead channels and magnet positionsThumb recesses · twin guides · center magnetsExterior detail · not to scaleTwin guide channelsCenter magnet positionsTwo detent patterns

A longitudinal channel runs down each side of the inner face. The beads carry the contact, keeping the broad metal faces apart as they travel.

Infinity halves, paired bead channels and magnet positions

  1. A longitudinal channel runs down each side of the inner face. The beads carry the contact, keeping the broad metal faces apart as they travel.
  2. Round magnet positions run along the center. As the halves overlap, magnetic attraction draws them back into registration.
  3. The studio illustrates two stages with ten beads and three stages with six. The bead count changes the detent sequence, while the mass of each shell alters the sensation on return.
02

Identifying the editions

JUZHEDC introduced Infinity as its first metal slider. Its March 2022 demonstration shows steel, titanium and zirconium. On April 23 the studio confirmed that all three materials had shipped. Later studio-shop listings distinguish 1.0 and 2.0 PTFE films. Sales catalogs separately picture the additional metal finishes and the A and B G10 options.

The broad face and raised ends are silvery grey. Soft highlights trace the diagonal grooves. Steel is the heaviest of the three original builds.

The Model B catalog photograph shows diagonal channels and a round center under the colored layers. The A and B designations follow the individually pictured sales options. Their release dates are undocumented.

03

Reading an accessory listing

Hide details ▴Show details ▾

The studio shop lists PTFE films for 1.0 and 2.0 separately. A side-profile photograph records the gap between the sliding faces.

04

Choosing editions to compare

Compare body material and finish against the individual photographs.

Original ceramic stonewash

JUZHEDC’s chart gives separate weights for steel, titanium and zirconium.

Additional metal finishes

Named product variants document polished metals and blue anodized titanium.

Cataloged G10 configurations

Retail catalogs name and photograph Models A and B individually. The original studio chart covers metal only.

05

Sources, roadmap clues & scope boundaries

Hide details ▴Show details ▾

Beyond the verified configurations in this guide, the following clues and cross-family mentions are tracked separately:

  • Collector records:The studio’s January 2022 carbon-fiber slider video previewed its forthcoming metal design as a separate product. Resale labels also attach Infinity to fingerprint-pattern and openwork carbon sliders, Mokuti and mixed titanium/steel pieces. Factory issue as editions of the pictured family remains unconfirmed. JUZHEDC’s later free-moving middle layer is a separate product, and KADA also uses the name Infinity.
PARTS & PERIPHERALS ARCHIVE

Accessories and anatomy

3 records

The studio shop lists PTFE films for 1.0 and 2.0 separately. A side-profile photograph records the gap between the sliding faces.

Select an accessory to open its related host record.

Individual records (8 editions)

Ceramic-Stonewashed Stainless Steel

[Compare with: Ceramic-Stonewashed Titanium] Stainless steel / Ceramic stonewashed. How to recognize: The broad face and raised ends are silvery grey. Soft highlights trace the diagonal grooves. Steel is the heaviest of the three original builds. (Source note: Ceramic-Stonewashed Stainless Steel).

Issue quantity unpublished
112 g assembled
52 × 28 × 15 mm
Stainless steel
Ceramic stonewashed
The studio chart covers the three original materials. Later configurations are identified from their individual photographed listings.
Official announcement & image position

JUZHEDC’s 2022 material chart and TRB’s named variant · Single-edition photograph

Official source · JUZHEDC’s 2022 material chart and TRB’s named variant
Ceramic-Stonewashed Titanium

[Compare with: Ceramic-Stonewashed Zirconium] Titanium / Ceramic stonewashed. How to recognize: Diagonal grooves surround a round central mark. The matte grey face diffuses the light. The studio’s 67 g weight distinguishes this visually similar metal version. (Source note: Ceramic-Stonewashed Titanium).

Issue quantity unpublished
67 g assembled
52 × 28 × 15 mm
Titanium
Ceramic stonewashed
The studio chart covers the three original materials. Later configurations are identified from their individual photographed listings.
Official announcement & image position

JUZHEDC’s 2022 material chart and TRB’s named variant · Single-edition photograph

Official source · JUZHEDC’s 2022 material chart and TRB’s named variant
Ceramic-Stonewashed Zirconium

[Compare with: Polished Stainless Steel] Zirconium / Ceramic stonewashed. How to recognize: The darker grey faces retain the same diagonal grooves and rounded ends. The studio chart puts this version between titanium and steel at 92 g assembled. (Source note: Ceramic-Stonewashed Zirconium).

Issue quantity unpublished
92 g assembled
52 × 28 × 15 mm
Zirconium
Ceramic stonewashed
The studio chart covers the three original materials. Later configurations are identified from their individual photographed listings.
Official announcement & image position

JUZHEDC’s 2022 material chart and TRB’s named variant · Single-edition photograph

Official source · JUZHEDC’s 2022 material chart and TRB’s named variant
Polished Stainless Steel

[Compare with: Blue Anodized Titanium] Stainless steel / Polished. How to recognize: Bright reflections trace the grooves, cap and central mark. The variant listing identifies the metal as stainless steel. (Source note: Polished Stainless Steel).

Issue quantity unpublished
Official weight N/D
Official dimensions N/D
Stainless steel
Polished
The studio chart covers the three original materials. Later configurations are identified from their individual photographed listings.
Official announcement & image position

TRB’s JUZHEDC catalog and the photographed complete-slider variant · Single-edition photograph

Official source · TRB’s JUZHEDC catalog and the photographed complete-slider variant
Blue Anodized Titanium

[Compare with: Polished Zirconium] Titanium / Blue anodized. How to recognize: Blue covers both the end shoulders and grooved face. The diagonal cuts and circular emblem distinguish it from other blue titanium sliders by the studio. (Source note: Blue Anodized Titanium).

Issue quantity unpublished
Official weight N/D
Official dimensions N/D
Titanium
Blue anodized
The studio chart covers the three original materials. Later configurations are identified from their individual photographed listings.
Official announcement & image position

TRB’s JUZHEDC catalog and the photographed complete-slider variant · Single-edition photograph

Official source · TRB’s JUZHEDC catalog and the photographed complete-slider variant
Polished Zirconium

[Compare with: Multicolor G10, Model A] Zirconium / Polished. How to recognize: Bright lines reflect from the dark bevels. TRB lists a dedicated polished zirconium option. Resale records also describe polished zirconium examples as 2.0. (Source note: Polished Zirconium).

Issue quantity unpublished
Official weight N/D
Official dimensions N/D
Zirconium
Polished
The studio chart covers the three original materials. Later configurations are identified from their individual photographed listings.
Official announcement & image position

TRB’s JUZHEDC catalog and the photographed complete-slider variant · Single-edition photograph

Official source · TRB’s JUZHEDC catalog and the photographed complete-slider variant
Multicolor G10, Model A

[Compare with: Multicolor G10, Model B] G10 fiberglass laminate / Natural multicolor laminate, Model A. How to recognize: In the Model A listing, black, white, orange and blue layers sweep diagonally across the face. The small central mark blends into the pattern, which varies with the individual cut. (Source note: Multicolor G10, Model A).

Issue quantity unpublished
Official weight N/D
Official dimensions N/D
G10 fiberglass laminate
Natural multicolor laminate, Model A
The studio chart covers the three original materials. Later configurations are identified from their individual photographed listings.
Official announcement & image position

GEEONE’s JUZHEDC catalog, exact named G10 option and its photograph · Single-edition photograph

Official source · GEEONE’s JUZHEDC catalog, exact named G10 option and its photograph
Multicolor G10, Model B

[Compare with: Ceramic-Stonewashed Stainless Steel] G10 fiberglass laminate / Natural multicolor laminate, Model B. How to recognize: The Model B catalog photograph shows diagonal channels and a round center under the colored layers. The A and B designations follow the individually pictured sales options. Their release dates are undocumented. (Source note: Multicolor G10, Model B).

Issue quantity unpublished
Official weight N/D
Official dimensions N/D
G10 fiberglass laminate
Natural multicolor laminate, Model B
The studio chart covers the three original materials. Later configurations are identified from their individual photographed listings.
Official announcement & image position

GEEONE’s JUZHEDC catalog, exact named G10 option and its photograph · Single-edition photograph

Official source · GEEONE’s JUZHEDC catalog, exact named G10 option and its photograph

Configuration details

DESIGN THROUGH TIME

Edition records

JUZHEDC introduced Infinity as its first metal slider. Its March 2022 demonstration shows steel, titanium and zirconium. On April 23 the studio confirmed that all three materials had shipped. Later studio-shop listings distinguish 1.0 and 2.0 PTFE films. Sales catalogs separately picture the additional metal finishes and the A and B G10 options.

  1. Infinity Configuration Matrix8 verified records
    2022-03-30Ceramic-Stonewashed Stainless Steel
    2022-03-30Ceramic-Stonewashed Titanium
    2022-03-30Ceramic-Stonewashed Zirconium
    N/DPolished Stainless Steel
    STAGE 01

    Studio demonstration of three materials

    JUZHEDC demonstrated its first metal slider, the bead channels and the different rebound of three materials.

  2. Ceramic-Stonewashed ZirconiumEnlarge this crop ↗
    STAGE 02

    All three launch materials shipped

    The studio confirmed shipment of all three metals and published individual weights for the ceramic-stonewashed builds.

Choose two to compare

Compare any two verified configurations side by side across standardized fields.

⚡ 1-CLICK COMPARE PRESETSSelect any matchup to launch an instant side-by-side specification comparison

Host specifications side by side

The material and run size refer to the host.

Host specifications side by side
Dimension Ceramic-Stonewashed Stainless Steel This Family Multicolor G10, Model B Peer Reference
Material Stainless steel G10 fiberglass laminate
Finish Ceramic stonewashed Natural multicolor laminate, Model B
Issue quantity Issue quantity unpublished Issue quantity unpublished

REQUEST A CONFIGURATION OR PART

Looking for JUZHEDC Infinity?

Share the edition, material, or accessory you are looking for, and include a reference photo or serial number if available.

Send a sourcing request ↗

Keep exploring

FREQUENTLY ASKED QUESTIONS

Common questions about JUZHEDC Infinity

Does the stonewashed zirconium weigh 92 or 93 g?

JUZHEDC’s original chart gives 92 g. TRB lists 93 g without explaining the difference. The original chart supplies the launch figure here. Other zirconium finishes require their own measurement.

JUZHEDC’s original notice, studio demonstration and generation-specific film listings, supplemented by individually photographed catalog variants.

What do the 1.0 and 2.0 labels establish?

Both names appear in studio-shop film SKUs. Their images show differences in the fixing hardware beside the magnet positions. The same listings do not assign every complete-slider finish to a specific generation.

JUZHEDC’s original notice, studio demonstration and generation-specific film listings, supplemented by individually photographed catalog variants.

Which weight applies to the two G10 options?

The studio issued individual weights for the three launch metals. TRB gives a general G10 figure of 31 g, without separate studio measurements for Model A and Model B.

JUZHEDC’s original notice, studio demonstration and generation-specific film listings, supplemented by individually photographed catalog variants.

OFFICIAL ARCHIVE CITATION

Citing this guide

When referencing the configuration records, mass tiers, or identification rules from this page, use the citation format below.

TRB Creation, “JUZHEDC Infinity Edition and Mechanism Guide”, TRB EDC Wiki, https://trb-creation.com/pages/wiki-juzhe-infinity (Verified 2026-11-19).

Enlarged image

Compare configurations