LAUTIE · Shuffle Poker Slider Series

[Closest lookalike: Shuffle 1.0 · Stainless Steel + Copper Inlay Edition (63 g, AK Lim 199 / AA Lim 99)] Both belong to the December 2019 Gen 1 release (40×30×8 mm); this edition uses a dense Red Copper body with Stainless Steel inlays (72 g), weighing 9 g more than its inverted Stainless Steel + Copper counterpart (63 g). How to recognize: Warm antiqued red-copper card body with silver stainless steel rank/suit inlays at opposite corners and a clean flush pivot (no Gen 2 exposed bearing press-ring). (Documented quote: "Dec 2019 Shuffle 1.0: Antiqued Copper + Stainless Steel Inlay, mass 72 g, dimensions 40×30×8 mm, Spade AK Limited 199 and Heart AA Limited 99.").

Spade AK Limited to 199 pieces / Heart AA Limited to 99 pieces (launched Dec 10, 2019)

72 g

L 40 mm × W 30 mm × H 8 mm

Materials & parts

Antiqued Red Copper dual-card shells + Stainless Steel poker suit/rank inlays + corner-pivot magnetic fan-slide mechanism

Finishes & parts

Hand-antiqued crimson copper card faces with contrasting silver stainless steel Spade AK or Heart AA inlays and 2099 cyber-joker back engraving

The foundational origin of LAUTIE's poker slider lineage, establishing the 40×30 mm miniature card footprint and one-handed fan-sliding action.

[Closest lookalike: Shuffle 1.0 · Antiqued Copper + Stainless Steel Inlay Edition (72 g, AK Lim 199 / AA Lim 99)] Inverts the alloy pairing of the 72 g Copper edition: a hard Stainless Steel chassis with Red Copper inlays trims the weight to 63 g and produces a higher-pitched metallic snap. How to recognize: Silver-gray antiqued stainless steel card plates contrasted by reddish-brown copper rank and suit inlays. (Documented quote: "Dec 2019 Shuffle 1.0: Stainless Steel + Copper Inlay, mass 63 g, dimensions 40×30×8 mm, Spade AK Limited 199 and Heart AA Limited 99.").

Spade AK Limited to 199 pieces / Heart AA Limited to 99 pieces (launched Dec 10, 2019)

63 g

L 40 mm × W 30 mm × H 8 mm

Materials & parts

Antiqued tumbled Stainless Steel dual-card shells + Red Copper poker rank/suit inlays + corner-pivot magnetic fan-slide mechanism

Finishes & parts

Wear-resistant antiqued silver-gray stainless steel card faces accented with warm red-copper AK or AA inlays

The most durable everyday-carry configuration of Gen 1 Shuffle, with the Heart AA pair capped at just 99 units.

[Closest lookalike: Shuffle 2.0 AA · Antiqued Brass + Copper AA Limited Edition (74.5 g, Elastic Limited 199 / Final 440)] Both debuted in July 2020 in Antiqued Brass + Copper; this standard KK edition features King inlays and a royal portrait back (76.4 g), whereas the limited AA edition features Ace inlays and a radiating Spade-A back (74.5 g). How to recognize: Golden antiqued brass body with red-copper KK corner inlays and a relief King portrait framed by a copper bearing press-ring. (Documented quote: "Shuffle 2.0 upgrades the internal architecture from an arc track to symmetrical dual flat magnet tracks with a mechanical bearing press-ring: Antiqued Brass + Copper KK Standard Edition, 76.4 g, 40×30×8.5 mm.").

Standard production release (launched Jul 16, 2020 at 20:00 with spare PTFE glide strips)

76.4 g

L 40 mm × W 30 mm × H 8.5 mm

Materials & parts

Antiqued Brass dual-card body + Red Copper King (KK) inlays & bearing press-ring + internal symmetrical dual flat magnet tracks + factory PTFE glide strips

Finishes & parts

Antiqued golden brass card plates featuring a detailed King portrait engraving encircled by a red-copper bearing press-ring on the back and copper K inlays on the face

The flagship standard workhorse of Gen 2 Shuffle, debuting symmetrical dual flat tracks, factory PTFE glide tape, and the signature bearing press-ring.

[Closest lookalike: Shuffle 2.0 KK · Antiqued Brass + Copper KK Standard Edition (76.4 g)] Compared to the standard KK edition (76.4 g), this Pocket Rockets (AA) edition weighs 74.5 g, features a deeper radiating Ace of Spades back relief, and was produced in a capped elastic-limited run of 440 units. How to recognize: Antiqued brass body with copper 'A' corner inlays and a radiating Ace of Spades engraving surrounding the rear copper press-ring. (Documented quote: "Shuffle 2.0: Antiqued Brass + Copper AA Edition, Elastic Limited 199 (final output 440 units), mass 74.5 g, dimensions 40×30×8.5 mm.").

Elastic Limited 199 pieces (final verified production 440 units in the 2020 Product Compendium)

74.5 g

L 40 mm × W 30 mm × H 8.5 mm

Materials & parts

Antiqued Brass dual-card body + Red Copper Ace (AA) inlays & bearing press-ring + symmetrical dual flat magnet tracks

Finishes & parts

Antiqued brass plates inlaid with Red Copper Spade/Heart Aces on the face and a radiating geometric Ace of Spades emblem around the copper press-ring on the reverse

The sought-after Pocket Aces limited edition of the July 2020 Brass + Copper wave, permanently retired at 440 pieces.

[Closest lookalike: Shuffle 2.0 · Antiqued Copper + Cupronickel Inlay Limited Edition (Limited 99)] Mirror twin to the 99-piece Copper + Cupronickel edition: uses silver-gray Cupronickel for the main card body with Red Copper inlays for a cleaner hand feel. How to recognize: Warm silver-toned cupronickel card body accented by reddish-brown copper corner inlays and rear bearing press-ring. (Documented quote: "Shuffle 2.0 & 2021 Product Compendium: Cupronickel + Copper Limited to 99 pieces, dimensions 40×30×8.5 mm.").

Strictly limited to 99 pieces (documented in the Jul 2020 launch post and 2020/2021 Product Compendiums)

~76 g (high-density cupronickel + copper construction)

L 40 mm × W 30 mm × H 8.5 mm

Materials & parts

Antiqued Cupronickel dual-card body + Red Copper rank/suit inlays & bearing press-ring + symmetrical dual flat magnet tracks

Finishes & parts

Warm silver-gray antiqued cupronickel plates paired with red-copper inlays and a copper bearing press-ring

One of the rarest 99-unit small-batch copper-alloy contrast editions in the Gen 2 lineup.

[Closest lookalike: Shuffle 2.0 · Antiqued Cupronickel + Copper Inlay Limited Edition (Limited 99)] Paired twin to the 99-piece Cupronickel + Copper edition, placing Red Copper on the outer card plates and Cupronickel on the inlays for rapid, deep patina evolution. How to recognize: Deep reddish-brown copper card shells contrasted by silver cupronickel corner inlays and rear bearing press-ring. (Documented quote: "Shuffle 2.0 & 2021 Product Compendium: Copper + Cupronickel Limited to 99 pieces, dimensions 40×30×8.5 mm.").

Strictly limited to 99 pieces (documented in the Jul 2020 launch post and 2020/2021 Product Compendiums)

~77 g (heavyweight red-copper main chassis)

L 40 mm × W 30 mm × H 8.5 mm

Materials & parts

Antiqued Red Copper dual-card body + Cupronickel rank/suit inlays & bearing press-ring + symmetrical dual flat magnet tracks

Finishes & parts

Rich antiqued red-copper card plates inlaid with silver cupronickel rank/suit emblems and a cupronickel rear press-ring

Ultra-low-volume 99-piece inverted copper/cupronickel edition prized by patina collectors.

[Closest lookalike: 2099 Series · Shuffle 2.0 Zirconium + Copper Accent KK Standard Edition (54 g)] Both are standard Gen 2 KK releases: this edition uses a hard silver-gray Stainless Steel chassis (~66 g) with a brighter acoustic snap, whereas the Zirconium KK edition (54 g) offers a dark charcoal finish and is 12 g lighter. How to recognize: Silver-gray stainless steel card plates contrasted by warm copper K corner inlays and rear bearing press-ring. (Documented quote: "LAUTIE 2021 Official Product Compendium: Shuffle KK Stainless Steel Standard Edition; Shuffle AA Stainless Steel Discontinued.").

KK Edition is a standard production release / Stainless Steel AA variant was subsequently discontinued (per 2021 Product Compendium)

~66 g

L 40 mm × W 30 mm × H 8.5 mm

Materials & parts

Antiqued Stainless Steel dual-card body + Copper-alloy KK inlays & bearing press-ring + symmetrical dual flat magnet tracks

Finishes & parts

Rugged stonewashed stainless steel card faces accented with warm copper KK inlays and rear King portrait relief

The toughest everyday-carry stainless steel workhorse in the Gen 2 dual-track Shuffle family.

[Closest lookalike: 2099 Series · Shuffle 2.0 Zirconium + Copper Accent AA Edition (54 g, Elastic Limited 299 / Final 832)] Both debuted on December 12, 2021 in 54 g Zirconium + Copper; this KK edition is the standard release with King motifs, while the AA edition was an elastic-limited release (832 final units) with Ace motifs. How to recognize: Charcoal-black zirconium card body with red-copper K corner inlays and a copper bearing press-ring framing the rear King relief. (Documented quote: "2021 Double-12 New Release — 2099 Series Shuffle Material Update: Zirconium body with Red Copper inlays, mass 54 g, dimensions 40×30×8.5 mm, KK Standard Edition.").

Standard production release (launched Dec 12, 2021 at 20:00 for Double-12)

54 g (roughly 30% lighter than the brass/copper editions)

L 40 mm × W 30 mm × H 8.5 mm

Materials & parts

Sandblasted antiqued Zirconium dual-card body + Red Copper KK inlays & bearing press-ring + symmetrical dual flat magnet tracks

Finishes & parts

Deep charcoal zirconium plates with chamfered sandblasted surfaces accented by warm red-copper KK inlays and a copper bearing press-ring

First introduction of Zirconium into the Shuffle family, dropping total mass from ~76 g to an agile 54 g sweet spot.

[Closest lookalike: 2099 Series · Shuffle 2.0 Zirconium + Copper Accent KK Standard Edition (54 g)] Unlike the ongoing standard Zirconium KK edition, this AA edition features Pocket Aces inlays and a radiating Spade-A rear relief, capped forever at 832 pieces. How to recognize: Charcoal zirconium card plates with copper 'A' corner inlays and a radiating Spade-A back engraving around the copper press-ring. (Documented quote: "Dec 2021 Shuffle AA: Zirconium + Copper, mass 54 g, dimensions 40×30×8.5 mm, Elastic Limited 299 (final output 832 units).").

Elastic Limited 299 pieces (final verified production 832 units in the 2021 Product Compendium)

54 g

L 40 mm × W 30 mm × H 8.5 mm

Materials & parts

Sandblasted antiqued Zirconium dual-card body + Red Copper AA inlays & bearing press-ring + symmetrical dual flat magnet tracks

Finishes & parts

Dark matte zirconium plates inlaid with Red Copper Aces on the face and a radiating Ace of Spades back pattern around a copper press-ring

The runaway bestseller of the Gen 2 dual-layer era, reaching 832 orders during its timed elastic-limited window.

[Closest lookalike: 2099 Series · Shuffle III (3.0) Zirconium AKQ Royal Straight Flush Edition (Elastic Limited 399 / Final 1,366)] Both share the April 2023 three-layer hybrid mechanism (magnetic slide on one side, spring-loaded ball-detent ratchet on the other); this standard edition displays Three Aces (AAA), while the elastic-limited edition (1,366 final units) displays a Royal Straight Flush (AKQ). How to recognize: Three stacked zirconium cards fanning out to reveal three 'A' indices, with a streamlined pivot that eliminates Gen 2's exposed front press-ring. (Documented quote: "Shuffle 3.0 (Shuffle III): upgraded from two cards to a three-card stack uniting magnetic sliding and spring-bead mechanical ratcheting in one piece! Zirconium AAA Standard Edition.").

Standard production release (launched Apr 28, 2023 at 20:00)

~68 g (three-layer hybrid stack)

L 42 mm × W 30 mm × H 11.5 mm (three-card stacked architecture)

Materials & parts

Full Zirconium three-card stack + Copper/Brass tri-suit inlays (Spade A / Heart A / Diamond A) + spring-bead mechanical ratchet middle card + magnetic outer cards

Finishes & parts

Matte sandblasted charcoal zirconium three-layer deck that fans out into Three-of-a-Kind Aces (AAA), backed by a screw-concealing sunburst crest engraving

Milestone third-generation evolution combining magnetic sliding and mechanical ball-detent ratcheting in a three-card fan.

[Closest lookalike: 2099 Series · Shuffle III (3.0) Zirconium AAA Three-Layer Standard Edition] Unlike the standard AAA edition where all three cards bear Ace indices, this limited edition machines distinct A, K, and Q court motifs across the three layers and was capped at 1,366 units. How to recognize: When fanned open, the upper-left corners of the three zirconium cards display the sequential 'A · K · Q' straight flush indices. (Documented quote: "Apr 2023 Shuffle 3.0: Zirconium AKQ Edition Elastic Limited 399 (final output 1,366 units); AAA Standard Edition.").

Elastic Limited 399 pieces (final verified production 1,366 units in the 2023–2024 Product Compendium)

~68 g

L 42 mm × W 30 mm × H 11.5 mm

Materials & parts

Full Zirconium three-card stack + Copper/Brass A-K-Q inlays + spring-bead mechanical ratchet middle card + magnetic outer cards

Finishes & parts

Matte black sandblasted zirconium three-card stack inlaid with A, K, and Q indices and court-card artwork that fans out into a royal straight flush

Holds the all-time single-edition elastic-limited production record (1,366 pieces) in the Shuffle lineage.

[Closest lookalike: 2099 Series · Shuffle 2.0 Zirconium + Copper Accent KK Standard Edition (54 g)] Built on the dual-layer zirconium platform (52.3 g), this cross-border Urban EDC collaboration replaces smooth card faces with deep Seigaiha wave milling, AK inlays, and a custom compass press-ring (200 domestic units). How to recognize: Black zirconium plates covered in concentric fan-shaped Seigaiha wave reliefs with a golden compass-rose bearing press-ring on the back. (Documented quote: "May 2024 Shuffle Overseas Co-Branded Edition (LAUTIE × URBAN): Zirconium body + Copper inlays + Brass compass press-ring, mass 52.3 g, Limited to 200 pieces.").

Domestic allocation strictly limited to 200 pieces (launched May 20, 2024 at 20:00 alongside the US Urban EDC drop)

52.3 g

L 40 mm × W 30 mm × H 8.5 mm

Materials & parts

CNC Seigaiha wave-engraved Zirconium dual-card body + Red Copper AK inlays + Brass Urban EDC compass bearing press-ring + dual flat magnet tracks

Finishes & parts

Full-surface 3D Seigaiha wave relief milled into black zirconium, accented with red-copper AK face inlays and a golden brass Urban EDC compass press-ring on the reverse

The only international retailer collaboration in the Shuffle catalog, uniting LAUTIE's poker slider with Urban EDC's signature Seigaiha wave motif.

[Closest lookalike: 2026 Shuffle Pro · Stonewashed Titanium + Titanium Inlay AK Edition] Both belong to the 2026 fourth-generation Shuffle Pro release: this edition pairs a dark Zirconium chassis with bright Stainless Steel AK inlays for dense feedback, while the Titanium edition uses all-titanium stonewashed construction for featherweight agility. How to recognize: Dark charcoal zirconium card plates inlaid with bright silver stainless steel 'A / K' corner indices. (Documented quote: "Official Taobao V0 & LAUTIE 2026 Product Compendium: LAUTIE Shuffle Pro Zirconium + Stainless Steel Inlay AK Edition.").

2026 Standard production release (documented in the LAUTIE 2026 Official Product Compendium and Taobao V0 archive)

~55 g

L 40 mm × W 30 mm × H 8.5 mm (Pro ergonomic corner radiusing)

Materials & parts

Precision-chamfered Zirconium Pro card body + Stainless Steel AK rank/suit inlays + upgraded low-friction magnetic track system

Finishes & parts

Deep charcoal zirconium plates paired with crisp silver stainless steel AK inlays and refined perimeter linework for a high-contrast monochrome aesthetic

The monochrome black-and-silver Zirconium flagship of the 2026 fourth-generation Shuffle Pro lineup.

[Closest lookalike: 2026 Shuffle Pro · Zirconium + Stainless Steel Inlay AK Edition] Compared to the Zirconium + Stainless Steel Pro edition (~55 g), this edition introduces an all-titanium stonewashed chassis with titanium inlays, drastically reducing mass for effortless high-speed fanning. How to recognize: Light silver-gray stonewashed titanium card plates with dark contrast titanium 'A / K' corner inlays. (Documented quote: "Official Taobao V0 & LAUTIE 2026 Product Compendium: LAUTIE Shuffle Pro Titanium + Titanium Inlay AK Edition.").

2026 Standard production release (documented in the LAUTIE 2026 Official Product Compendium and Taobao V0 archive)

~42 g (the lightest all-titanium slider in the Shuffle family)

L 40 mm × W 30 mm × H 8.5 mm

Materials & parts

Stonewashed Grade 5 Titanium Pro card body + contrast-anodized Titanium AK inlays + upgraded Pro magnetic track system

Finishes & parts

Full-surface stonewashed matte titanium finish that hides fingerprints and wear, accented with contrasting titanium AK corner inlays

The first full-production all-titanium featherweight configuration in the seven-year history of the Shuffle series.