MACKIEMACKIE
MACKIE FAMILY ARCHIVE

MACKIE GUM Slider Edition and Mechanism Guide

Four translucent colors share the same CNC-machined acrylic body and bite-shaped end.

TRB Creation · 2026-11-19

Family facts
Studio MACKIE
Documented hosts 4
Anatomy views Two specimen photographs
Host materials PMMA (acrylic)

MACKIE introduced the design as GUMDROP on August 16, 2025, and scheduled its release for 8 p.m. on August 17. TRB lists it as GUM and identifies four PMMA colors: blueberry, peach, green apple and grape.

How the editions were identified

MACKIE’s dated launch notice, TRB’s four named retail options and photographs of the individual sliders.

FAMILY ARCHIVE

Editions & configurations

4 complete-configuration records

Four translucent colors share the same CNC-machined acrylic body and bite-shaped end.

Factory hostsBrowse group4 configuration recordsMACKIE GUM Slider host releases
TRB WIKI VERIFIED SPECIFICATION

Documented points

Scalloped edge, sliding face and contrasting middle layer

Rest the rounded lower body against your fingers.

Move the upper face along the body with your thumb. The scalloped end shifts past the lower half.

Draw the face back until the two outlines align and the white middle layer sits between them.

01

How the movement feels

Cradle the rounded end and push the bitten upper face with your thumb. The halves open by hand. As the face moves, the clear shell lets you follow the patterned sliding surface.

Rest the rounded lower body against your fingers.

Scalloped edge, sliding face and contrasting middle layerTranslucent scalloped face, white layer and lower shellExterior detail · not to scaleHoldSlideClose

Rest the rounded lower body against your fingers.

Scalloped edge, sliding face and contrasting middle layer

  1. Rest the rounded lower body against your fingers.
  2. Move the upper face along the body with your thumb. The scalloped end shifts past the lower half.
  3. Draw the face back until the two outlines align and the white middle layer sits between them.
02

Identifying the editions

MACKIE introduced the design as GUMDROP on August 16, 2025, and scheduled its release for 8 p.m. on August 17. TRB lists it as GUM and identifies four PMMA colors: blueberry, peach, green apple and grape.

The pale blue shell reveals circular inserts beneath three transverse grooves. The scalloped bite is easiest to see against the darker edge.

The violet exterior gives the white layer a particularly clear outline. At the top edge, the two layers follow the same bite-shaped curve.

03

Reading an accessory listing

Hide details ▴Show details ▾

Two views of a green apple slider reveal the sliding surface and the exposed edge of the center layer.

04

Choosing editions to compare

Compare body material and finish against the individual photographs.

Factory hosts

MACKIE GUM Slider host releases

05

Sources, roadmap clues & scope boundaries

Hide details ▴Show details ▾

Beyond the verified configurations in this guide, the following clues and cross-family mentions are tracked separately:

  • Collector records:The August 18 draw offered one full set and three individual sliders in randomly assigned colors. A suggestion of future flavors gave no names or dates. A pre-owned title calls one piece PC, but the studio release imagery and four named retail options identify PMMA. The seller label supplies no evidence of a separate factory release.
PARTS & PERIPHERALS ARCHIVE

Accessories and anatomy

2 records

Two views of a green apple slider reveal the sliding surface and the exposed edge of the center layer.

Select an accessory to open its related host record.

Individual records (4 editions)

Blueberry PMMA

[Compare with: Peach PMMA] The pale blue shell reveals circular inserts beneath three transverse grooves. The scalloped bite is easiest to see against the darker edge. How to recognize: The pale blue shell reveals circular inserts beneath three transverse grooves. The scalloped bite is easiest to see against the darker edge. (Source note: Blueberry PMMA).

N/D
11 g (studio family specification)
N/D
PMMA (acrylic)
Fine bead-blasted finish
MACKIE quotes one weight for the design. Edition-specific measurements and production counts are undocumented.
Official announcement & image position

MACKIE launch notice and the corresponding named TRB product option. · Single-edition photograph

Official source · MACKIE launch notice and the corresponding named TRB product option.
Peach PMMA

[Compare with: Green Apple PMMA] A pale blush face contrasts with the white middle layer. A round insert is visible near each end in the photograph of the closed slider. How to recognize: A pale blush face contrasts with the white middle layer. A round insert is visible near each end in the photograph of the closed slider. (Source note: Peach PMMA).

N/D
11 g (studio family specification)
N/D
PMMA (acrylic)
Fine bead-blasted finish
MACKIE quotes one weight for the design. Edition-specific measurements and production counts are undocumented.
Official announcement & image position

MACKIE launch notice and the corresponding named TRB product option. · Single-edition photograph

Official source · MACKIE launch notice and the corresponding named TRB product option.
Green Apple PMMA

[Compare with: Grape PMMA] The aqua-green shell reveals the patterned strip down its center. The two anatomy photographs show how this build looks edge-on and with the slide extended. How to recognize: The aqua-green shell reveals the patterned strip down its center. The two anatomy photographs show how this build looks edge-on and with the slide extended. (Source note: Green Apple PMMA).

N/D
11 g (studio family specification)
N/D
PMMA (acrylic)
Fine bead-blasted finish
MACKIE quotes one weight for the design. Edition-specific measurements and production counts are undocumented.
Official announcement & image position

MACKIE launch notice and the corresponding named TRB product option. · Single-edition photograph

Official source · MACKIE launch notice and the corresponding named TRB product option.
Grape PMMA

[Compare with: Blueberry PMMA] The violet exterior gives the white layer a particularly clear outline. At the top edge, the two layers follow the same bite-shaped curve. How to recognize: The violet exterior gives the white layer a particularly clear outline. At the top edge, the two layers follow the same bite-shaped curve. (Source note: Grape PMMA).

N/D
11 g (studio family specification)
N/D
PMMA (acrylic)
Fine bead-blasted finish
MACKIE quotes one weight for the design. Edition-specific measurements and production counts are undocumented.
Official announcement & image position

MACKIE launch notice and the corresponding named TRB product option. · Single-edition photograph

Official source · MACKIE launch notice and the corresponding named TRB product option.

Configuration details

DESIGN THROUGH TIME

Edition records

MACKIE introduced the design as GUMDROP on August 16, 2025, and scheduled its release for 8 p.m. on August 17. TRB lists it as GUM and identifies four PMMA colors: blueberry, peach, green apple and grape.

  1. GUM Slider Configuration Matrix4 verified records
    2025-08-17Blueberry PMMA
    2025-08-17Peach PMMA
    2025-08-17Green Apple PMMA
    2025-08-17Grape PMMA
    STAGE 01

    Blueberry PMMA

    The pale blue shell reveals circular inserts beneath three transverse grooves. The scalloped bite is easiest to see against the darker edge.

  2. Peach PMMAEnlarge this crop ↗
    STAGE 02

    Peach PMMA

    A pale blush face contrasts with the white middle layer. A round insert is visible near each end in the photograph of the closed slider.

  3. Green Apple PMMAEnlarge this crop ↗
    STAGE 03

    Green Apple PMMA

    The aqua-green shell reveals the patterned strip down its center. The two anatomy photographs show how this build looks edge-on and with the slide extended.

  4. Grape PMMAEnlarge this crop ↗
    STAGE 04

    Grape PMMA

    The violet exterior gives the white layer a particularly clear outline. At the top edge, the two layers follow the same bite-shaped curve.

Choose two to compare

Compare any two verified configurations side by side across standardized fields.

⚡ 1-CLICK COMPARE PRESETSSelect any matchup to launch an instant side-by-side specification comparison

Host specifications side by side

The material and run size refer to the host.

Host specifications side by side
Dimension Blueberry PMMA This Family Grape PMMA Peer Reference
Material PMMA (acrylic) PMMA (acrylic)
Finish Fine bead-blasted finish Fine bead-blasted finish
Numbered run N/D N/D

REQUEST A CONFIGURATION OR PART

Looking for MACKIE GUM Slider?

Share the edition, material, or accessory you are looking for, and include a reference photo or serial number if available.

Send a sourcing request ↗

Keep exploring

FREQUENTLY ASKED QUESTIONS

Common questions about MACKIE GUM Slider

Why do the names GUM and GUMDROP both appear?

GUMDROP appears in the studio launch artwork. TRB uses the shorter GUM name for the same four-color acrylic slider.

MACKIE’s dated launch notice, TRB’s four named retail options and photographs of the individual sliders.

What did MACKIE publish about the size?

The launch notice describes a thumb-sized body and gives a weight of 11 g. Exact dimensions remain undocumented.

MACKIE’s dated launch notice, TRB’s four named retail options and photographs of the individual sliders.

Did the launch giveaway introduce a fifth color?

The notice offered one full set and three randomly chosen single sliders from the launch range. It did not identify an exclusive color.

MACKIE’s dated launch notice, TRB’s four named retail options and photographs of the individual sliders.

OFFICIAL ARCHIVE CITATION

Citing this guide

When referencing the configuration records, mass tiers, or identification rules from this page, use the citation format below.

Studio release record

The August 18 draw offered one full set and three individual sliders in randomly assigned colors. A suggestion of future flavors gave no names or dates. A pre-owned title calls one piece PC, but the studio release imagery and four named retail options identify PMMA. The seller label supplies no evidence of a separate factory release.

MACKIE’s August 16, 2025 GUMDROP announcement
TRB Creation, “MACKIE GUM Slider Edition and Mechanism Guide”, TRB EDC Wiki, https://trb-creation.com/pages/wiki-mackie-gum (Verified 2026-11-19).

Enlarged image

Compare configurations