Factory hosts
MACKIE Nuclear host releases
Two January launch builds and a four-piece superconductor edition share a four-ball linkage.
TRB Creation · 2026-11-19
| Studio | MACKIE |
|---|---|
| Documented hosts | 3 |
| Studio anatomy views | 3 studio photographs |
| Host materials | Titanium, Stainless steel, Superconductor rod stock |
MACKIE named Nuclear after the Rutherford atomic model and called it the fourth member of its Nuclear series. The four-lobe spinner launched on January 8, 2022 in heat-blue titanium and distressed steel, with 150 of each. A January 18 notice introduced the four-piece superconductor build after it had sold out.
Two MACKIE studio notices and their material plates establish the releases. TRB product specifications and individually identified photos document the two launch builds.
Two January launch builds and a four-piece superconductor edition share a four-ball linkage.
No matching configuration. Clear the search or reset filters.
Pinch the caps and flick a lobe. The outer ring starts the inner ring turning. Briefly stop the outer ring and the moving inner assembly transfers motion back through four 4 mm steel balls. The balls click as they move.
Pinch the center caps to let the two rings turn around the bearing assembly.
Pinch the center caps to let the two rings turn around the bearing assembly.
Four outer lobes, a moving inner ring and four steel balls
MACKIE named Nuclear after the Rutherford atomic model and called it the fourth member of its Nuclear series. The four-lobe spinner launched on January 8, 2022 in heat-blue titanium and distressed steel, with 150 of each. A January 18 notice introduced the four-piece superconductor build after it had sold out.
A blue band sits between the silver-colored outer lobes and center cap. MACKIE describes a heat-blue finish and a fine blasting medium. Its launch plate assigns 150 pieces to titanium.
Copper-colored lines run across the cap and body. MACKIE used fine-filament stock for the opposing caps and medium-filament stock for the body and linkage blocks. All four had sold by the January 18 announcement.
Three studio views show the parts laid out, the exposed ball linkage and the inner-ring insert slots.
Compare body material and finish against the individual photographs.
MACKIE Nuclear host releases
Beyond the verified configurations in this guide, the following clues and cross-family mentions are tracked separately:
Three studio views show the parts laid out, the exposed ball linkage and the inner-ring insert slots.
Select an accessory to open its related host record.
ANATOMYDisassembled Steel NuclearThe two caps and a separate ring sit beside the body. The bearing is visible with the caps off.View related record ↗
ANATOMYFour-Ball LinkageWith the center caps removed, four steel balls are visible around the bearing carrier. Their movement couples the two rings.View related record ↗
ANATOMYInner-Ring Insert SlotsThe launch photograph shows green inserts marking the ring. The studio plate lists eight positions for 1.5 × 6 mm tubes.View related record ↗
[Compare with: Distressed Stainless Steel] A blue band sits between the silver-colored outer lobes and center cap. MACKIE describes a heat-blue finish and a fine blasting medium. Its launch plate assigns 150 pieces to titanium. How to recognize: A blue band sits between the silver-colored outer lobes and center cap. MACKIE describes a heat-blue finish and a fine blasting medium. Its launch plate assigns 150 pieces to titanium. (Source note: Heat-Blue Titanium).
MACKIE studio notice, material-specific photograph and release record. · Single-edition photograph
Official source · MACKIE studio notice, material-specific photograph and release record.[Compare with: Superconductor Nuclear] The dark gray finish gives way to lighter edges around the four lobes. The studio followed distressing with a light ceramic stonewash and listed 150 pieces on the launch plate. How to recognize: The dark gray finish gives way to lighter edges around the four lobes. The studio followed distressing with a light ceramic stonewash and listed 150 pieces on the launch plate. (Source note: Distressed Stainless Steel).
MACKIE studio notice, material-specific photograph and release record. · Single-edition photograph
Official source · MACKIE studio notice, material-specific photograph and release record.[Compare with: Heat-Blue Titanium] Copper-colored lines run across the cap and body. MACKIE used fine-filament stock for the opposing caps and medium-filament stock for the body and linkage blocks. All four had sold by the January 18 announcement. How to recognize: Copper-colored lines run across the cap and body. MACKIE used fine-filament stock for the opposing caps and medium-filament stock for the body and linkage blocks. All four had sold by the January 18 announcement. (Source note: Superconductor Nuclear).
MACKIE studio notice, material-specific photograph and release record. · Single-edition photograph
Official source · MACKIE studio notice, material-specific photograph and release record.MACKIE named Nuclear after the Rutherford atomic model and called it the fourth member of its Nuclear series. The four-lobe spinner launched on January 8, 2022 in heat-blue titanium and distressed steel, with 150 of each. A January 18 notice introduced the four-piece superconductor build after it had sold out.
A blue band sits between the silver-colored outer lobes and center cap. MACKIE describes a heat-blue finish and a fine blasting medium. Its launch plate assigns 150 pieces to titanium.
Enlarge this crop ↗The dark gray finish gives way to lighter edges around the four lobes. The studio followed distressing with a light ceramic stonewash and listed 150 pieces on the launch plate.
Enlarge this crop ↗Copper-colored lines run across the cap and body. MACKIE used fine-filament stock for the opposing caps and medium-filament stock for the body and linkage blocks. All four had sold by the January 18 announcement.
Compare any two verified configurations side by side across standardized fields.
No configurations match. Clear the search to start again.
Share the edition, material, or accessory you are looking for, and include a reference photo or serial number if available.
Heat-blue titanium weighs 82.4 g and distressed steel weighs 136 g. The studio printed a 150-piece run beside each build.
Two MACKIE studio notices and their material plates establish the releases. TRB product specifications and individually identified photos document the two launch builds.
Four loose 4 mm steel balls transfer motion between the rings. They knock against the surrounding parts as the rings turn.
Two MACKIE studio notices and their material plates establish the releases. TRB product specifications and individually identified photos document the two launch builds.
The January 18 notice documents four superconductor hosts. It identifies fine-filament stock in the caps and medium-filament stock in both the body and linkage blocks.
Two MACKIE studio notices and their material plates establish the releases. TRB product specifications and individually identified photos document the two launch builds.