WANWU EDCWANWU EDC
WANWU FAMILY ARCHIVE

WANWU Skylines Fidget Spinner Edition Guide

Four original finishes and three Twin Leaf configurations share a 58 mm sweep. The open frame and weight change between generations.

TRB Creation · 2026-11-19

Family facts
Studio WANWU
Documented hosts 7
Accessory and anatomy photographs 2 photographs of the supplied service parts and rotor anatomy
Host materials Stainless steel, Zirconium alloy

WANWU had a four-arm prototype by mid-2023. The studio traced its production delays to deformation during machining of the open frame. The four finishes went on sale on March 29, 2024, with 30 of each. The accompanying giveaway used the name “black machined zirconium.” WANWU announced the Twin Leaf on March 15, 2026 and released it at 7 p.m. on March 17.

How the editions were identified

WANWU’s four-arm announcement, Twin Leaf specification poster and shop menu

FAMILY ARCHIVE

Editions & configurations

7 complete-configuration records

Four original finishes and three Twin Leaf configurations share a 58 mm sweep. The open frame and weight change between generations.

Two launch finishes in steelBrowse group2 configuration recordsBoth weigh 56 g. Compare the stonewashed surfaces with the visible machining lines.
Black and gradient zirconiumBrowse group2 configuration recordsBoth weigh 47 g, with 30 released in each finish.
Three Twin Leaf appearancesBrowse group3 configuration recordsThe studio offered steel and zirconium, with a chance of a heat-colored finish on zirconium orders.
TRB WIKI VERIFIED SPECIFICATION

Documented points

Open four-arm rotor, finger cap and direction of rotation

Hold the recessed center caps between two fingers while leaving the open frame free.

Give an outer arm a light flick. The open rotor turns around its central bearing.

Let the rotor stop before turning it over. The side view reveals the original’s asymmetry or the Twin Leaf’s milled arm ends.

01

How the movement feels

Both generations spin an open rotor around the finger caps. The original has differently shaped faces, while the Twin Leaf adds ball-end milling and broad side curves.

Hold the recessed center caps between two fingers while leaving the open frame free.

Open four-arm rotor, finger cap and direction of rotationFour open arms, center cap and direction of rotationExterior detail · not to scaleHold the finger capsFlick an armTurn the stopped rotor over

Hold the recessed center caps between two fingers while leaving the open frame free.

Open four-arm rotor, finger cap and direction of rotation

  1. Hold the recessed center caps between two fingers while leaving the open frame free.
  2. Give an outer arm a light flick. The open rotor turns around its central bearing.
  3. Let the rotor stop before turning it over. The side view reveals the original’s asymmetry or the Twin Leaf’s milled arm ends.
02

Identifying the editions

WANWU had a four-arm prototype by mid-2023. The studio traced its production delays to deformation during machining of the open frame. The four finishes went on sale on March 29, 2024, with 30 of each. The accompanying giveaway used the name “black machined zirconium.” WANWU announced the Twin Leaf on March 15, 2026 and released it at 7 p.m. on March 17.

Four open windows surround the cap. The fine overlapping stonewash marks soften the reflections on the broad steel faces.

Colored bands extend over the arms and cap. The studio shop supplied this complete finish at random on zirconium orders.

03

Reading an accessory listing

Hide details ▴Show details ▾

The Twin Leaf box contains a protective case, five stickers, a bearing removal tool, a spare gold-plated bearing and an inspection certificate. The photographs show the service parts and the open rotor.

04

Choosing editions to compare

Compare body material and finish against the individual photographs.

Two launch finishes in steel

Both weigh 56 g. Compare the stonewashed surfaces with the visible machining lines.

Black and gradient zirconium

Both weigh 47 g, with 30 released in each finish.

Three Twin Leaf appearances

The studio offered steel and zirconium, with a chance of a heat-colored finish on zirconium orders.

05

Sources, roadmap clues & scope boundaries

Hide details ▴Show details ▾

Beyond the verified configurations in this guide, the following clues and cross-family mentions are tracked separately:

  • Collector records:The 2024 giveaway names one black machined zirconium spinner and one stonewashed steel spinner. The sale notice documents the black zirconium finish. The giveaway supplies no separate specification for a fifth four-arm edition. The Twin Leaf steel run and actual count of heat-colored zirconium pieces are unpublished. Faith’s Skyline belongs to a different studio.
PARTS & PERIPHERALS ARCHIVE

Accessories and anatomy

2 records

The Twin Leaf box contains a protective case, five stickers, a bearing removal tool, a spare gold-plated bearing and an inspection certificate. The photographs show the service parts and the open rotor.

Select an accessory to open its related host record.

Individual records (7 editions)

Four-arm · Stonewashed Steel

[Compare with: Four-arm · Machined Steel] Stainless steel / Blasted, then stonewashed. How to recognize: Four open windows surround the cap. The fine overlapping stonewash marks soften the reflections on the broad steel faces. (Source note: Four-arm · Stonewashed Steel).

30 in this finish
56 g
58 mm sweep, 10 mm body, cap Ø20 × 14 mm
Stainless steel
Blasted, then stonewashed
Unpublished measurements are marked N/D.
Official announcement & image position

WANWU’s March 29, 2024 announcement and four individually labeled studio photographs · WANWU’s March 29, 2024 announcement and four individually labeled studio photographs

Official source · WANWU’s March 29, 2024 announcement and four individually labeled studio photographs
Four-arm · Machined Steel

[Compare with: Four-arm · Heat-blackened Zirconium] Stainless steel / Machining marks, lightly polished and stonewashed. How to recognize: The four windowed arms preserve their cutting lines. Tilt a broad face toward the light to see the machining marks. (Source note: Four-arm · Machined Steel).

30 in this finish
56 g
58 mm sweep, 10 mm body, cap Ø20 × 14 mm
Stainless steel
Machining marks, lightly polished and stonewashed
Unpublished measurements are marked N/D.
Official announcement & image position

WANWU’s March 29, 2024 announcement and four individually labeled studio photographs · WANWU’s March 29, 2024 announcement and four individually labeled studio photographs

Official source · WANWU’s March 29, 2024 announcement and four individually labeled studio photographs
Four-arm · Heat-blackened Zirconium

[Compare with: Four-arm · Gradient Zirconium] Zirconium alloy / Lightly polished and stonewashed before heat-blackening. How to recognize: The cap and all four windowed arms have a dark finish. The angled edges catch highlights as the frame turns. (Source note: Four-arm · Heat-blackened Zirconium).

30 in this finish
47 g
58 mm sweep, 10 mm body, cap Ø20 × 14 mm
Zirconium alloy
Lightly polished and stonewashed before heat-blackening
Unpublished measurements are marked N/D.
Official announcement & image position

WANWU’s March 29, 2024 announcement and four individually labeled studio photographs · WANWU’s March 29, 2024 announcement and four individually labeled studio photographs

Official source · WANWU’s March 29, 2024 announcement and four individually labeled studio photographs
Four-arm · Gradient Zirconium

[Compare with: Twin Leaf · Pearl-stonewashed Steel] Zirconium alloy / Partial heat-color gradient. How to recognize: The cap and selected edges show a color gradient beside darker areas. WANWU notes that the gradient varies from piece to piece. (Source note: Four-arm · Gradient Zirconium).

30 in this finish
47 g
58 mm sweep, 10 mm body, cap Ø20 × 14 mm
Zirconium alloy
Partial heat-color gradient
Unpublished measurements are marked N/D.
Official announcement & image position

WANWU’s March 29, 2024 announcement and four individually labeled studio photographs · WANWU’s March 29, 2024 announcement and four individually labeled studio photographs

Official source · WANWU’s March 29, 2024 announcement and four individually labeled studio photographs
Twin Leaf · Pearl-stonewashed Steel

[Compare with: Twin Leaf · Heat-blackened Zirconium] Stainless steel / Pearl stonewash. How to recognize: Two opposing open arms frame the center. Ball-end milling leaves closely spaced lines near their tips. (Source note: Twin Leaf · Pearl-stonewashed Steel).

Studio poster gives no steel edition size
46 g
58 mm sweep, 10 mm body and 14 mm across the caps
Stainless steel
Pearl stonewash
Unpublished measurements are marked N/D.
Official announcement & image position

The March 15, 2026 Twin Leaf specification poster and official shop options, released on March 17 · The March 15, 2026 Twin Leaf specification poster and official shop options, released on March 17

Official source · The March 15, 2026 Twin Leaf specification poster and official shop options, released on March 17
Twin Leaf · Heat-blackened Zirconium

[Compare with: Twin Leaf · Heat-colored Zirconium] Zirconium alloy / Pearl stonewash and black heat finish. How to recognize: The two arm edges and central cap have a black finish. The cutouts at the sides reveal the shape around the bearing. (Source note: Twin Leaf · Heat-blackened Zirconium).

199 across black and heat-colored zirconium
39 g
58 mm sweep, 10 mm body and 14 mm across the caps
Zirconium alloy
Pearl stonewash and black heat finish
Unpublished measurements are marked N/D.
Official announcement & image position

The March 15, 2026 Twin Leaf specification poster and official shop options, released on March 17 · The March 15, 2026 Twin Leaf specification poster and official shop options, released on March 17

Official source · The March 15, 2026 Twin Leaf specification poster and official shop options, released on March 17
Twin Leaf · Heat-colored Zirconium

[Compare with: Four-arm · Stonewashed Steel] Zirconium alloy / Pearl stonewash and heat coloring. How to recognize: Colored bands extend over the arms and cap. The studio shop supplied this complete finish at random on zirconium orders. (Source note: Twin Leaf · Heat-colored Zirconium).

25% chance within 199 zirconium pieces
39 g
58 mm sweep, 10 mm body and 14 mm across the caps
Zirconium alloy
Pearl stonewash and heat coloring
Unpublished measurements are marked N/D.
Official announcement & image position

The March 15, 2026 Twin Leaf specification poster and official shop options, released on March 17 · The March 15, 2026 Twin Leaf specification poster and official shop options, released on March 17

Official source · The March 15, 2026 Twin Leaf specification poster and official shop options, released on March 17

Configuration details

DESIGN THROUGH TIME

Edition records

WANWU had a four-arm prototype by mid-2023. The studio traced its production delays to deformation during machining of the open frame. The four finishes went on sale on March 29, 2024, with 30 of each. The accompanying giveaway used the name “black machined zirconium.” WANWU announced the Twin Leaf on March 15, 2026 and released it at 7 p.m. on March 17.

  1. Skylines Configuration Matrix7 verified records
    2024-03-29Four-arm · Stonewashed Steel
    2024-03-29Four-arm · Machined Steel
    2024-03-29Four-arm · Heat-blackened Zirconium
    2024-03-29Four-arm · Gradient Zirconium
    STAGE 01

    Four-arm · Stonewashed Steel

    Four open windows surround the cap. The fine overlapping stonewash marks soften the reflections on the broad steel faces.

  2. Twin Leaf · Pearl-stonewashed SteelEnlarge this crop ↗
    STAGE 02

    Twin Leaf · Pearl-stonewashed Steel

    Two opposing open arms frame the center. Ball-end milling leaves closely spaced lines near their tips.

Choose two to compare

Compare any two verified configurations side by side across standardized fields.

⚡ 1-CLICK COMPARE PRESETSSelect any matchup to launch an instant side-by-side specification comparison

Host specifications side by side

The material and run size refer to the host.

Host specifications side by side
Dimension Four-arm · Stonewashed Steel This Family Twin Leaf · Heat-colored Zirconium Peer Reference
Material Stainless steel Zirconium alloy
Finish Blasted, then stonewashed Pearl stonewash and heat coloring
Release quantity 30 in this finish 25% chance within 199 zirconium pieces

REQUEST A CONFIGURATION OR PART

Looking for WANWU EDC Skylines?

Share the edition, material, or accessory you are looking for, and include a reference photo or serial number if available.

Send a sourcing request ↗

Keep exploring

FREQUENTLY ASKED QUESTIONS

Common questions about WANWU EDC Skylines

How much does each generation weigh?

The four-arm steel and zirconium versions weigh 56 g and 47 g. The matching Twin Leaf versions weigh 46 g and 39 g. Both generations have a 58 mm sweep.

WANWU’s four-arm announcement, Twin Leaf specification poster and shop menu

How did buyers receive the heat-colored Twin Leaf?

The zirconium option carried a 25% chance of the heat-colored finish. The studio gives a 199-piece zirconium offering and leaves the actual finish split unpublished.

WANWU’s four-arm announcement, Twin Leaf specification poster and shop menu

OFFICIAL ARCHIVE CITATION

Citing this guide

When referencing the configuration records, mass tiers, or identification rules from this page, use the citation format below.

Additional release records

The 2024 giveaway names one black machined zirconium spinner and one stonewashed steel spinner. The sale notice documents the black zirconium finish. The giveaway supplies no separate specification for a fifth four-arm edition. The Twin Leaf steel run and actual count of heat-colored zirconium pieces are unpublished. Faith’s Skyline belongs to a different studio.

Release and specimen sources

TRB Creation, “WANWU Skylines Fidget Spinner Edition Guide”, TRB EDC Wiki, https://trb-creation.com/pages/wiki-wanwu-skylines (Verified 2026-11-19).

Enlarged image

Compare configurations