YEDCYEDC
YEDC FAMILY ARCHIVE

YEDC P-CUBE Mechanical and Magnetic Slider Edition Guide

A compact four-way slider with a working directional pad and a turning rocker. The two launch bodies shipped with different, interchangeable liners.

TRB Creation · 2026-11-20

Family facts
Studio YEDC
Documented hosts 2
Parts and anatomy photos One detent plate and one rear-shell detail
Host materials Polycarbonate (PC), Polyether ether ketone (PEEK)

On June 1, 2024, YEDC distributed the earlier Shijia design to VIP players. Their feedback informed a new 55-part body, 5 mm larger than its predecessor, with the middle layer removed. The studio announced P-CUBE on March 18, 2025, ahead of its March 21 sale.

How the editions were identified

YEDC’s March 18, 2025 launch notice and the corresponding TRB material and liner options.

FAMILY ARCHIVE

Editions & configurations

2 complete-configuration records

A compact four-way slider with a working directional pad and a turning rocker. The two launch bodies shipped with different, interchangeable liners.

Factory hostsBrowse group2 configuration recordsYEDC P-CUBE host releases
TRB WIKI VERIFIED SPECIFICATION

Documented points

Directional pad, rocker and sliding face

Steady the lower half and slide the upper face in one of four directions.

Turn the sliding face along its travel in the factory setup. With the optional stop fitted, turn it at the far end.

Press the directional pad for a crisp click, then try the quieter power button.

01

How the movement feels

Push the top face in any of four directions. The directional pad clicks, the power button presses quietly, and the round rocker turns. With the optional mechanical stop installed, the sliding face turns only at the end of its travel.

Steady the lower half and slide the upper face in one of four directions.

Directional pad, rocker and sliding faceSliding face, directional pad and rockerExterior detail · not to scaleSlideTurnPress

Steady the lower half and slide the upper face in one of four directions.

Directional pad, rocker and sliding face

  1. Steady the lower half and slide the upper face in one of four directions.
  2. Turn the sliding face along its travel in the factory setup. With the optional stop fitted, turn it at the far end.
  3. Press the directional pad for a crisp click, then try the quieter power button.
02

Identifying the editions

On June 1, 2024, YEDC distributed the earlier Shijia design to VIP players. Their feedback informed a new 55-part body, 5 mm larger than its predecessor, with the middle layer removed. The studio announced P-CUBE on March 18, 2025, ahead of its March 21 sale.

The translucent shell reveals a coral-colored directional pad. The underside shows the contours beneath its clear cover.

The opaque cream shell surrounds a dark cross with a round cream rocker in its center.

03

Reading an accessory listing

Hide details ▴Show details ▾

Compare the removable plate with the underside of the assembled PC slider.

04

Choosing editions to compare

Compare body material and finish against the individual photographs.

Factory hosts

YEDC P-CUBE host releases

05

Sources, roadmap clues & scope boundaries

Hide details ▴Show details ▾

Beyond the verified configurations in this guide, the following clues and cross-family mentions are tracked separately:

  • Collector records:The box carries the serial number and contains an identity card. One resale listing uses the label PEI. The studio identifies PC and PEEK as the two launch bodies. An August 2025 studio note mentioned a future special-material P-CUBE without specifying its material or release size.
PARTS & PERIPHERALS ARCHIVE

Accessories and anatomy

2 records

Compare the removable plate with the underside of the assembled PC slider.

Select an accessory to open its related host record.

Individual records (2 editions)

PC Mechanical

[Compare with: PEEK Magnetic] The factory PC build carries the mechanical liner, which accepts a removable detent plate. How to recognize: The translucent shell reveals a coral-colored directional pad. The underside shows the contours beneath its clear cover. (Source note: PC Mechanical).

500 pieces
66 g
42 × 42 × 17 mm
Polycarbonate (PC)
Surface treatment unspecified
The liner refers to the original pairing. A subsequent liner swap changes the feedback.
Official announcement & image position

YEDC launch notice, TRB material specifications and the labeled whole-slider photograph. · Single-edition photograph

Official source · YEDC launch notice, TRB material specifications and the labeled whole-slider photograph.
PEEK Magnetic

[Compare with: PC Mechanical] YEDC pairs the PEEK shell with the magnetic liner. It can also accept the other factory liner. How to recognize: The opaque cream shell surrounds a dark cross with a round cream rocker in its center. (Source note: PEEK Magnetic).

500 pieces
91 g
42 × 42 × 17 mm
Polyether ether ketone (PEEK)
Surface treatment unspecified
The liner refers to the original pairing. A subsequent liner swap changes the feedback.
Official announcement & image position

YEDC launch notice, TRB material specifications and the labeled whole-slider photograph. · Single-edition photograph

Official source · YEDC launch notice, TRB material specifications and the labeled whole-slider photograph.

Configuration details

DESIGN THROUGH TIME

Edition records

On June 1, 2024, YEDC distributed the earlier Shijia design to VIP players. Their feedback informed a new 55-part body, 5 mm larger than its predecessor, with the middle layer removed. The studio announced P-CUBE on March 18, 2025, ahead of its March 21 sale.

  1. P-CUBE Configuration Matrix2 verified records
    2025-03-21PC Mechanical
    2025-03-21PEEK Magnetic
    STAGE 01

    Shijia player trial

    YEDC distributed the earlier Shijia to VIP players and collected their feedback.

  2. PC MechanicalEnlarge this crop ↗
    STAGE 02

    PC and PEEK release

    YEDC released 500 of each factory shell and liner combination.

Choose two to compare

Compare any two verified configurations side by side across standardized fields.

⚡ 1-CLICK COMPARE PRESETSSelect any matchup to launch an instant side-by-side specification comparison

Host specifications side by side

The material and run size refer to the host.

Host specifications side by side
Dimension PC Mechanical This Family PEEK Magnetic Peer Reference
Material Polycarbonate (PC) Polyether ether ketone (PEEK)
Finish Surface treatment unspecified Surface treatment unspecified
Launch allocation 500 pieces 500 pieces

REQUEST A CONFIGURATION OR PART

Looking for YEDC P-CUBE?

Share the edition, material, or accessory you are looking for, and include a reference photo or serial number if available.

Send a sourcing request ↗

Keep exploring

FREQUENTLY ASKED QUESTIONS

Common questions about YEDC P-CUBE

How can I tell the two launch sliders apart?

The translucent PC housing reveals the inner controls and weighs 66 g as assembled. The opaque cream PEEK version weighs 91 g. TRB lists both at 42 × 42 × 17 mm.

YEDC’s March 18, 2025 launch notice and the corresponding TRB material and liner options.

Can the two liners be exchanged?

Yes. The PC body originally carries the mechanical liner and PEEK the magnetic liner. The separate super-dense detent plate is intended for the mechanical liner.

YEDC’s March 18, 2025 launch notice and the corresponding TRB material and liner options.

Where does YEDC put the serial number?

YEDC put the number on the outer box and an identity card inside. Its launch allocation was 500 PC and 500 PEEK sliders.

YEDC’s March 18, 2025 launch notice and the corresponding TRB material and liner options.

OFFICIAL ARCHIVE CITATION

Citing this guide

When referencing the configuration records, mass tiers, or identification rules from this page, use the citation format below.

Studio records and component evidence

TRB Creation, “YEDC P-CUBE Mechanical and Magnetic Slider Edition Guide”, TRB EDC Wiki, https://trb-creation.com/pages/wiki-yedc-p-cube (Verified 2026-11-20).

Enlarged image

Compare configurations