Two stainless steel finishes
Released together, with 150 pieces allocated to each finish.
Sliding the three steel layers apart exposes the internal guides. Each of the three rounded recesses gives the fingertip a different point of purchase.
TRB Creation · 2026-11-19
| Studio | 01EDC |
|---|---|
| Documented hosts | 2 |
| Separate accessory records | 0 |
| Host materials | Stainless steel |
01EDC introduced Pea Slider on November 26, 2024. Both steel finishes went on sale on November 29, with 150 pieces allocated to each. Later studio giveaways kept the same two finish names.
01EDC studio release and named factory variants
Sliding the three steel layers apart exposes the internal guides. Each of the three rounded recesses gives the fingertip a different point of purchase.
No matching configuration. Clear the search or reset filters.
Three finger recesses run along each outer plate. One side has four magnetic steps and the other has two. Eight 3 mm POM balls guide the movement, and hidden stops limit the travel.
Pressure at the upper recess lifts a plate before it taps back against the next layer.
Pressure at the upper recess lifts a plate before it taps back against the next layer.
Three finger recesses and staggered plates
01EDC introduced Pea Slider on November 26, 2024. Both steel finishes went on sale on November 29, with 150 pieces allocated to each. Later studio giveaways kept the same two finish names.
The three recesses and their raised rim reflect a soft, diffuse gray. The studio describes a fine stonewash across the steel.
Look for crisp reflections along the edges of the recesses and the outer frame. The polished highlights change sharply as the slider tilts.
The factory release lists two complete sliders. Its mechanism description identifies the POM balls, magnets, shims and stops as internal components.
Compare body material and finish against the individual photographs.
Released together, with 150 pieces allocated to each finish.
Beyond the verified configurations in this guide, the following clues and cross-family mentions are tracked separately:
The factory release lists two complete sliders. Its mechanism description identifies the POM balls, magnets, shims and stops as internal components.
[Compare with: Polished stainless steel] Stainless steel / Fine stonewash. How to recognize: The three recesses and their raised rim reflect a soft, diffuse gray. The studio describes a fine stonewash across the steel. (Source note: Stonewashed stainless steel).
01EDC November 2024 release sheet and the matching factory Taobao option. · Single-edition photograph
Official source · 01EDC November 2024 release sheet and the matching factory Taobao option.[Compare with: Stonewashed stainless steel] Stainless steel / Fine polish. How to recognize: Look for crisp reflections along the edges of the recesses and the outer frame. The polished highlights change sharply as the slider tilts. (Source note: Polished stainless steel).
01EDC November 2024 release sheet and the matching factory Taobao option. · Single-edition photograph
Official source · 01EDC November 2024 release sheet and the matching factory Taobao option.01EDC introduced Pea Slider on November 26, 2024. Both steel finishes went on sale on November 29, with 150 pieces allocated to each. Later studio giveaways kept the same two finish names.
The three recesses and their raised rim reflect a soft, diffuse gray. The studio describes a fine stonewash across the steel.
Enlarge this crop ↗Look for crisp reflections along the edges of the recesses and the outer frame. The polished highlights change sharply as the slider tilts.
Compare any two verified configurations side by side across standardized fields.
No configurations match. Clear the search to start again.
Share the edition, material, or accessory you are looking for, and include a reference photo or serial number if available.
01EDC allocated 150 pieces to each finish, 300 in total. The factory shop assigned a separate option to each.
01EDC studio release and named factory variants
One face moves through four magnetic steps and the other through two. Pressing the upper, middle or lower recess changes how the plate pivots.
01EDC studio release and named factory variants
OneBean designed artwork for 01EDC’s modular slider shells. Pea Slider has its own three-recess steel body and a separate release in two plain finishes.
01EDC studio release and named factory variants
The studio named POD after a seedpod and a spacecraft capsule. Pea Slider is identifiable by its three recesses and layered steel body. The two release descriptions show different mechanisms.
01EDC studio release and named factory variants