Original metal bodies
The three materials in the June 2020 release.
The original four-way slider also rotates and clicks at four independent buttons. ACEdc counted four body components, four buttons, one limiter, eight screws, 24 magnets and several snap domes. The anniversary revision split the limiter and removed its need for threadlocker.
TRB Creation · 2026-11-18
| Studio | ACEdc |
|---|---|
| Documented hosts | 8 |
| Separate accessory records | 6 |
| Host materials | Copper, Titanium alloy, Zirconium alloy, Cupronickel, PMMA with cupronickel liner, Patterned titanium laminate, Zirconium Damascus, Ceramic carbon-pattern material |
In June 2020, ACEdc released the square Gamer in copper, titanium and zirconium. The studio revisited the four-button layout for its first anniversary in 2021. The revised cupronickel body weighs 153 g. The PMMA slider in the anniversary set weighs 74 g.
The original and anniversary studio releases document the controls, two measured anniversary bodies and the first three production runs. Cataloged specimens identify the patterned bodies.
The original four-way slider also rotates and clicks at four independent buttons. ACEdc counted four body components, four buttons, one limiter, eight screws, 24 magnets and several snap domes. The anniversary revision split the limiter and removed its need for threadlocker.
No matching configuration. Clear the search or reset filters.
The original four-way slider also rotates and clicks at four independent buttons. ACEdc counted four body components, four buttons, one limiter, eight screws, 24 magnets and several snap domes. The anniversary revision split the limiter and removed its need for threadlocker.
The square halves travel along perpendicular axes. The guide constrains the direction of each stroke.
The square halves travel along perpendicular axes. The guide constrains the direction of each stroke.
Gamer: shell travel, rotation and key press
In June 2020, ACEdc released the square Gamer in copper, titanium and zirconium. The studio revisited the four-button layout for its first anniversary in 2021. The revised cupronickel body weighs 153 g. The PMMA slider in the anniversary set weighs 74 g.
Copper shows through at the button rims and edges. The darker face sits above a visible split between the two plates.
Dark buttons sit over irregular purple and charcoal patches. The registry describes a ceramic carbon material. Its composition and production process are unpublished.
Individually documented parts for Gamer.
Compare body material and finish against the individual photographs.
The three materials in the June 2020 release.
A revised limiter in cupronickel and PMMA housings.
The patterned material extends across the housing as well as the button area.
Beyond the verified configurations in this guide, the following clues and cross-family mentions are tracked separately:
Individually documented parts for Gamer.
Select an accessory to open its related host record.
ACCESSORYAluminum GBA Display CaseThe first studio release table lists a separately sold aluminum case. The round recess takes the companion coin, and the square recess takes the slider.View related record ↗
ACCESSORYAnniversary PMMA Presentation CaseThe third component in the anniversary set has two shaped openings. The studio photograph shows both pieces seated in the translucent holder.View related record ↗
ACCESSORYAnniversary D-pad CoinThe round companion from the PMMA set has a single red D-pad. The studio lists a 39.6 mm diameter, 14 mm thickness and 24 g weight.View related record ↗
ACCESSORYGamer Service ScrewdriverThe ACEdc Original shop listed a dedicated Gamer screwdriver as a separate SKU. The catalog does not specify the tip size.View related record ↗
ACCESSORY2.0 Cross-shaped GuideThe studio teardown exposes the cross-shaped path inside the body. Its split limiter replaced the earlier construction that could require return service.View related record ↗
ACCESSORY2.0 Button CarrierFour metal snap domes sit around the central limiter in this studio teardown. Each dome corresponds to one of the four independently moving keys.View related record ↗
[Closest lookalike: Original Titanium] Copper / Aged copper appearance. How to recognize: Copper shows through at the button rims and edges. The darker face sits above a visible split between the two plates. (Source note: Original Copper).
ACEdc Original, Double Noize Gamer studio release and material table, November 14, 2020. · Single-edition photograph
Official source · ACEdc Original, Double Noize Gamer studio release and material table, November 14, 2020.[Closest lookalike: Original Zirconium] Titanium alloy / Studio finish N/D; polished specimen shown. How to recognize: The photographed specimen has bright silver-gray faces and reflective button rims. The studio listed titanium at launch. TRB's specimen record describes its polish. (Source note: Original Titanium).
ACEdc Original, Double Noize Gamer studio release and material table, November 14, 2020. TRB Creation photographed the polished specimen shown. · Single-edition photograph
Official source · ACEdc Original, Double Noize Gamer studio release and material table, November 14, 2020. TRB Creation photographed the polished specimen shown.[Closest lookalike: 2.0 Stonewashed Cupronickel] Zirconium alloy / Studio finish N/D; dark matte specimen shown. How to recognize: The shell and all four buttons are dark. The controller symbols are cut into the button faces. (Source note: Original Zirconium).
ACEdc Original, Double Noize Gamer studio release and material table, November 14, 2020. TRB Creation zirconium photograph. · Single-edition photograph
Official source · ACEdc Original, Double Noize Gamer studio release and material table, November 14, 2020. TRB Creation zirconium photograph.[Closest lookalike: Anniversary PMMA Slider] Cupronickel / Stonewashed. How to recognize: The warm silver face has four raised symbol keys. The side carries GAMER and ACEdc. The studio specification sheet names the stonewashed finish. (Source note: 2.0 Stonewashed Cupronickel).
ACEdc Original, first-anniversary studio release and specification poster, February 23, 2021. · Single-edition photograph
Official source · ACEdc Original, first-anniversary studio release and specification poster, February 23, 2021.[Closest lookalike: Titanium Damascus] PMMA with cupronickel liner / Translucent shell. How to recognize: Four red buttons sit in the translucent square shell. A cupronickel liner adds mass. The round D-pad coin and presentation case belong to the same 60-set release. (Source note: Anniversary PMMA Slider).
ACEdc Original, first-anniversary studio release and specification poster, February 23, 2021. · Single-edition photograph
Official source · ACEdc Original, first-anniversary studio release and specification poster, February 23, 2021.[Closest lookalike: Zirconium Damascus] Patterned titanium laminate / Layered color bands. How to recognize: Colored laminate bands continue across the whole face. TRB's edge photograph shows both the GAMER name and the ACEdc maker mark. (Source note: Titanium Damascus).
Zhiqu ACEdc Original registry 2023060602520278; TRB Creation Mokuti specimen shows matching GAMER and ACEdc edge engravings. Kane confirmed this factory-complete edition on November 18, 2026. · Single-edition photograph
Official source · Zhiqu ACEdc Original registry 2023060602520278; TRB Creation Mokuti specimen shows matching GAMER and ACEdc edge engravings. Kane confirmed this factory-complete edition on November 18, 2026.[Closest lookalike: Ceramic Carbon Damascus] Zirconium Damascus / Colored laminate with dark bands. How to recognize: Dark stripes cross the colored layers across the full front plate. Dealer records also document zirconium bodies fitted with patterned buttons, a different configuration. (Source note: Zirconium Damascus).
Zhiqu ACEdc Original registry 2023060602470751 and TRB Creation's full-body Zircuti Rainbow specimen; the launch notice is unlocated. Kane confirmed this factory-complete edition on November 18, 2026. · Single-edition photograph
Official source · Zhiqu ACEdc Original registry 2023060602470751 and TRB Creation's full-body Zircuti Rainbow specimen; the launch notice is unlocated. Kane confirmed this factory-complete edition on November 18, 2026.[Closest lookalike: Original Copper] Ceramic carbon-pattern material / Mottled carbon pattern. How to recognize: Dark buttons sit over irregular purple and charcoal patches. The registry describes a ceramic carbon material. Its composition and production process are unpublished. (Source note: Ceramic Carbon Damascus).
Zhiqu ACEdc Original registry 2023060602926067; TRB Creation's carbon set includes maker-marked edges and original cards. Kane confirmed this factory-complete edition on November 18, 2026. · Single-edition photograph
Official source · Zhiqu ACEdc Original registry 2023060602926067; TRB Creation's carbon set includes maker-marked edges and original cards. Kane confirmed this factory-complete edition on November 18, 2026.In June 2020, ACEdc released the square Gamer in copper, titanium and zirconium. The studio revisited the four-button layout for its first anniversary in 2021. The revised cupronickel body weighs 153 g. The PMMA slider in the anniversary set weighs 74 g.
Copper shows through at the button rims and edges. The darker face sits above a visible split between the two plates.
Enlarge this crop ↗Dark buttons sit over irregular purple and charcoal patches. The registry describes a ceramic carbon material. Its composition and production process are unpublished.
Compare any two verified configurations side by side across standardized fields.
No configurations match. Clear the search to start again.
Share the edition, material, or accessory you are looking for, and include a reference photo or serial number if available.
ACEdc specified PMMA for the translucent square body and cupronickel for internal parts. The assembled slider weighs 74 g.
The original and anniversary studio releases document the controls, two measured anniversary bodies and the first three production runs. Cataloged specimens identify the patterned bodies.
Look for the square housing, four independently moving controller buttons and ACEdc markings on the body. Ruisha released a different product under the same English name.
The original and anniversary studio releases document the controls, two measured anniversary bodies and the first three production runs. Cataloged specimens identify the patterned bodies.