ACEdcACEDC
ACEdc FAMILY ARCHIVE

ACEdc Mechanical Stamp Slider Edition and Mechanism Guide

Inside the stamp-shaped edge, two ball tracks and a center stop govern the slide. The earlier faceplates still fit. Open the slider to see which chassis is underneath.

TRB Creation · 2026-11-21

Family facts
Studio ACEdc
Documented hosts 2
Parts and anatomy Five accessories and one anatomy view
Host materials Stainless steel, Zirconium alloy

ACEdc introduced the magnetic Stamp in May 2022. It began prototyping the mechanical chassis in mid-2023, retained the familiar perimeter and faceplates, and opened orders on May 1, 2024. About 100 of each body were ready at launch. The studio catalog separately sets a limit of 299 on blasted zirconium.

How the editions were identified

ACEdc launch chart and TRB specifications

FAMILY ARCHIVE

Editions & configurations

2 complete-configuration records

Inside the stamp-shaped edge, two ball tracks and a center stop govern the slide. The earlier faceplates still fit. Open the slider to see which chassis is underneath.

Stainless steel chassisBrowse group1 configuration recordsBright steel frame with a fitted plate.
Zirconium chassisBrowse group1 configuration recordsDark zirconium frame with a fitted plate.
TRB WIKI VERIFIED SPECIFICATION

Documented points

Scalloped chassis and straight-line travel

ACEdc recommends light pressure from above to keep the sliding piece aligned with both tracks.

The supplied strip has six steps in each direction.

Partway through the stroke, the side tracks and center guide become visible.

01

How the movement feels

Two side tracks guide the balls while a center post limits travel. Light pressure from above keeps the faceplate aligned as the balls cross the separate detent strip. The supplied strip gives six steps in each direction. The faceplate holds the playable assembly together.

ACEdc recommends light pressure from above to keep the sliding piece aligned with both tracks.

Scalloped chassis and straight-line travelScalloped chassis and straight-line travelExterior detail · not to scalePress from aboveFeel the detentsFind the center stop

ACEdc recommends light pressure from above to keep the sliding piece aligned with both tracks.

Scalloped chassis and straight-line travel

  1. ACEdc recommends light pressure from above to keep the sliding piece aligned with both tracks.
  2. The supplied strip has six steps in each direction.
  3. Partway through the stroke, the side tracks and center guide become visible.
02

Identifying the editions

ACEdc introduced the magnetic Stamp in May 2022. It began prototyping the mechanical chassis in mid-2023, retained the familiar perimeter and faceplates, and opened orders on May 1, 2024. About 100 of each body were ready at launch. The studio catalog separately sets a limit of 299 on blasted zirconium.

The fitted brass-colored plate sits within a bright scalloped edge. The body material remains visible along the side and on the exposed track.

The dark frame retains the scalloped stamp outline. Sliding the illustrated plate exposes the two side tracks and the central guide.

03

Reading an accessory listing

Hide details ▴Show details ▾

Three faceplates, two display racks and one view of the opened mechanism.

04

Choosing editions to compare

Compare body material and finish against the individual photographs.

Stainless steel chassis

Bright steel frame with a fitted plate.

Zirconium chassis

Dark zirconium frame with a fitted plate.

05

Sources, roadmap clues & scope boundaries

Hide details ▴Show details ▾

Beyond the verified configurations in this guide, the following clues and cross-family mentions are tracked separately:

  • Collector records:The 2022 magnetic bodies have their own materials and edition sizes. The same faceplate can fit either generation. The exposed side tracks, center stop and separate detent strip identify the mechanical chassis.
PARTS & PERIPHERALS ARCHIVE

Accessories and anatomy

6 records

Three faceplates, two display racks and one view of the opened mechanism.

Select an accessory to open its related host record.

Individual records (2 editions)

Stonewashed stainless steel

[Compare with: Blasted zirconium] The studio specification is 7 g heavier than the blasted zirconium body. How to recognize: The fitted brass-colored plate sits within a bright scalloped edge. The body material remains visible along the side and on the exposed track. (Source note: Stonewashed stainless steel).

Overall edition size undisclosed
38 g
32 × 24 × 13 mm
Stainless steel
Stonewashed
The 2022 magnetic bodies have their own materials and edition sizes. The same faceplate can fit either generation. The exposed side tracks, center stop and separate detent strip identify the mechanical chassis.
Official announcement & image position

ACEdc launch chart and TRB specifications · May 2024 mechanical launch body

Official source · ACEdc launch chart and TRB specifications
Blasted zirconium

[Compare with: Stonewashed stainless steel] ACEdc’s store identifies a 299-piece limit for the blasted zirconium version. The initial stock count is a separate figure. How to recognize: The dark frame retains the scalloped stamp outline. Sliding the illustrated plate exposes the two side tracks and the central guide. (Source note: Blasted zirconium).

299 pieces
31 g
32 × 24 × 13 mm
Zirconium alloy
Blasted
The 2022 magnetic bodies have their own materials and edition sizes. The same faceplate can fit either generation. The exposed side tracks, center stop and separate detent strip identify the mechanical chassis.
Official announcement & image position

ACEdc launch chart and TRB specifications · May 2024 mechanical launch body

Official source · ACEdc launch chart and TRB specifications

Configuration details

DESIGN THROUGH TIME

Edition records

ACEdc introduced the magnetic Stamp in May 2022. It began prototyping the mechanical chassis in mid-2023, retained the familiar perimeter and faceplates, and opened orders on May 1, 2024. About 100 of each body were ready at launch. The studio catalog separately sets a limit of 299 on blasted zirconium.

  1. Mechanical Stamp Configuration Matrix2 verified records
    2024-05-01Stonewashed stainless steel
    2024-05-01Blasted zirconium
    STAGE 01

    Magnetic predecessor

    The first Stamp introduced the faceplate format retained by the later mechanical chassis.

  2. Blasted zirconiumEnlarge this crop ↗
    STAGE 02

    Mechanical release

    The twin-track mechanical chassis launched in stonewashed steel and blasted zirconium.

Choose two to compare

Compare any two verified configurations side by side across standardized fields.

⚡ 1-CLICK COMPARE PRESETSSelect any matchup to launch an instant side-by-side specification comparison

Host specifications side by side

The material and run size refer to the host.

Host specifications side by side
Dimension Stonewashed stainless steel Edition A Blasted zirconium Edition B
Material Stainless steel Zirconium alloy
Finish Stonewashed Blasted
Numbered run Overall edition size undisclosed 299 pieces

REQUEST A CONFIGURATION OR PART

Looking for ACEdc Mechanical Stamp?

Share the edition, material, or accessory you are looking for, and include a reference photo or serial number if available.

Send a sourcing request ↗

Keep exploring

FREQUENTLY ASKED QUESTIONS

Common questions about ACEdc Mechanical Stamp

Can a faceplate identify the mechanical generation?

Both generations accept the same plates. Look for the side tracks, central stop and separate detent strip on the mechanical chassis.

ACEdc launch chart and TRB specifications

What do the figures of about 100 and 299 describe?

ACEdc announced roughly 100 ready units of each material for the May 2024 launch. Its 299-piece limit applies to the blasted zirconium option.

ACEdc launch chart and TRB specifications

OFFICIAL ARCHIVE CITATION

Citing this guide

When referencing the configuration records, mass tiers, or identification rules from this page, use the citation format below.

Studio records and specifications

TRB Creation, “ACEdc Mechanical Stamp Slider Edition and Mechanism Guide”, TRB EDC Wiki, https://trb-creation.com/pages/wiki-acedc-mechanical-stamp (Verified 2026-11-21).

Enlarged image

Compare configurations