Clown OrangeCLOWN ORANGE
Clown Orange FAMILY ARCHIVE

Clown Orange Brick Magnetic Slider Edition Guide

A question block interrupts the brick wall on one face. A Clown Orange emblem marks the other. Two plates and four guide beads give this straight slider two steps in either direction.

TRB Creation · 2026-11-20

Family facts
Studio Clown Orange
Documented hosts 2
Anatomy records An open specimen and a studio plate drawing
Host materials Stainless steel, Zirconium alloy

Clown Orange previewed Brick on October 9, 2022 and took launch orders from 8 to 8:30 p.m. on October 30. The regular materials were stainless steel and zirconium. By October 2023 the studio had documented version 2.0 in both materials, with greater thickness and rounder edges.

How the editions were identified

Clown Orange’s 2022 launch notice and 2023 studio guide, checked against named TRB material options

FAMILY ARCHIVE

Editions & configurations

2 complete-configuration records

A question block interrupts the brick wall on one face. A Clown Orange emblem marks the other. Two plates and four guide beads give this straight slider two steps in either direction.

Two regular launch materialsBrowse group2 configuration recordsThe steel and zirconium records span two documented revisions.
TRB WIKI VERIFIED SPECIFICATION

Documented points

Brick face, magnet positions and straight travel

The question-block face and the logo face share a staggered brick pattern. Align the two plates to see the full outline.

Push one plate along its long edge. The bead tracks guide it through the two stops described in the launch notice.

Clown Orange describes a stronger return than outward push. Four 6 × 2 mm N52 magnets per plate work with four 4 mm guide beads.

01

How the movement feels

Two brick-patterned plates travel along their long axis. Four magnets in each plate work with four guide beads to produce two steps in either direction. The studio describes a firmer pull as the plates return to the center.

The question-block face and the logo face share a staggered brick pattern. Align the two plates to see the full outline.

Brick face, magnet positions and straight travelBrick grooves, question block and magnet positionExterior detail · not to scaleIdentify the facesSlide through two stopsFeel the return

The question-block face and the logo face share a staggered brick pattern. Align the two plates to see the full outline.

Brick face, magnet positions and straight travel

  1. The question-block face and the logo face share a staggered brick pattern. Align the two plates to see the full outline.
  2. Push one plate along its long edge. The bead tracks guide it through the two stops described in the launch notice.
  3. Clown Orange describes a stronger return than outward push. Four 6 × 2 mm N52 magnets per plate work with four 4 mm guide beads.
02

Identifying the editions

Clown Orange previewed Brick on October 9, 2022 and took launch orders from 8 to 8:30 p.m. on October 30. The regular materials were stainless steel and zirconium. By October 2023 the studio had documented version 2.0 in both materials, with greater thickness and rounder edges.

The silver-colored face has staggered vertical joints, long horizontal brick grooves and a square question block. TRB assigns this complete specimen photograph to the stainless-steel option.

The dark-gray launch specimen has a question mark inside the inset square. Its brick joints follow the steel edition’s pattern. The studio launch menu and TRB’s named option establish the zirconium material.

03

Reading an accessory listing

Hide details ▴Show details ▾

An open specimen exposes the magnet positions. The studio drawing identifies the four beads that guide travel.

04

Choosing editions to compare

Compare body material and finish against the individual photographs.

Two regular launch materials

The steel and zirconium records span two documented revisions.

05

Sources, roadmap clues & scope boundaries

Hide details ▴Show details ▾

Beyond the verified configurations in this guide, the following clues and cross-family mentions are tracked separately:

  • Collector records:The launch announcement gave zirconium orders a one-in-25 chance of receiving a specially patterned titanium Damascus Brick. No fixed edition count was given. Version 3.0 was a forecast in the 2023 studio guide. Zircuti, cupronickel and G10 descriptions appear in resale records without corresponding studio release documentation. Both revisions use steel and zirconium, so material alone cannot establish the revision.
PARTS & PERIPHERALS ARCHIVE

Accessories and anatomy

2 records

An open specimen exposes the magnet positions. The studio drawing identifies the four beads that guide travel.

Select an accessory to open its related host record.

Individual records (2 editions)

Stainless Steel Brick

[Compare with: Zirconium Brick] Stainless steel / Not specified by the studio. How to recognize: The silver-colored face has staggered vertical joints, long horizontal brick grooves and a square question block. TRB assigns this complete specimen photograph to the stainless-steel option. (Source note: Stainless Steel Brick).

Timed order window, total undisclosed
Official weight N/D
Launch nominal size 50 × 25 × 10 mm
Stainless steel
Not specified by the studio
The card identifies the material. Launch dimensions apply to the original design.
Official announcement & image position

Clown Orange’s 2022 launch notice and 2023 studio guide, checked against named TRB material options · Regular whole-slider material at the original launch

Official source · Clown Orange’s 2022 launch notice and 2023 studio guide, checked against named TRB material options
Zirconium Brick

[Compare with: Stainless Steel Brick] Zirconium alloy / Stonewash (TRB listing), launch finish undisclosed. How to recognize: The dark-gray launch specimen has a question mark inside the inset square. Its brick joints follow the steel edition’s pattern. The studio launch menu and TRB’s named option establish the zirconium material. (Source note: Zirconium Brick).

Timed order window, total undisclosed
82 g in the TRB zirconium listing
Launch nominal size 50 × 25 × 10 mm
Zirconium alloy
Stonewash (TRB listing), launch finish undisclosed
The card identifies the material. Launch dimensions apply to the original design.
Official announcement & image position

Clown Orange’s 2022 launch notice and 2023 studio guide, checked against named TRB material options · Regular whole-slider material at the original launch

Official source · Clown Orange’s 2022 launch notice and 2023 studio guide, checked against named TRB material options

Configuration details

DESIGN THROUGH TIME

Edition records

Clown Orange previewed Brick on October 9, 2022 and took launch orders from 8 to 8:30 p.m. on October 30. The regular materials were stainless steel and zirconium. By October 2023 the studio had documented version 2.0 in both materials, with greater thickness and rounder edges.

  1. Brick Configuration Matrix2 verified records
    2022-10-30Stainless Steel Brick
    2022-10-30Zirconium Brick
    STAGE 01

    Regular steel and zirconium orders open

    The studio opened orders for the two regular materials and gave the draw odds for the hidden pattern.

  2. Zirconium BrickEnlarge this crop ↗
    STAGE 02

    Studio identifies the two body revisions

    Clown Orange documented a thicker body and broader radiused edges on 2.0, available in the same two materials.

Choose two to compare

Compare any two verified configurations side by side across standardized fields.

⚡ 1-CLICK COMPARE PRESETSSelect any matchup to launch an instant side-by-side specification comparison

Host specifications side by side

The material and run size refer to the host.

Host specifications side by side
Dimension Stainless Steel Brick This Family Zirconium Brick Peer Reference
Material Stainless steel Zirconium alloy
Finish Not specified by the studio Stonewash (TRB listing), launch finish undisclosed
Numbered run Timed order window, total undisclosed Timed order window, total undisclosed

REQUEST A CONFIGURATION OR PART

Looking for Clown Orange Brick?

Share the edition, material, or accessory you are looking for, and include a reference photo or serial number if available.

Send a sourcing request ↗

Keep exploring

FREQUENTLY ASKED QUESTIONS

Common questions about Clown Orange Brick

How do I distinguish versions 1.0 and 2.0?

The studio describes the first release as thinner and 2.0 as thicker, with rounder corners. The 2023 guide identifies both materials for 2.0 without giving a revised thickness.

Clown Orange’s 2022 launch notice and 2023 studio guide, checked against named TRB material options

How many hidden editions were made?

The studio published draw odds of one in 25 for zirconium orders. It described a special titanium Damascus pattern, while leaving the production total unspecified.

Clown Orange’s 2022 launch notice and 2023 studio guide, checked against named TRB material options

OFFICIAL ARCHIVE CITATION

Citing this guide

When referencing the configuration records, mass tiers, or identification rules from this page, use the citation format below.

Studio records

The launch announcement gave zirconium orders a one-in-25 chance of receiving a specially patterned titanium Damascus Brick. No fixed edition count was given. Version 3.0 was a forecast in the 2023 studio guide. Zircuti, cupronickel and G10 descriptions appear in resale records without corresponding studio release documentation. Both revisions use steel and zirconium, so material alone cannot establish the revision.

TRB Creation, “Clown Orange Brick Magnetic Slider Edition Guide”, TRB EDC Wiki, https://trb-creation.com/pages/wiki-clown-orange-brick (Verified 2026-11-20).

Enlarged image

Compare configurations