JUZHEDCJUZHEDC
JUZHEDC FAMILY ARCHIVE

JUZHEDC Triassic Slider Edition and Mechanism Guide

Push the Triassic with a thumb and a long slot emerges from beneath the offset cover. Four balls guide the stroke, while a titanium reed gives it a distinct sound.

TRB Creation · 2026-11-21

Family facts
Studio JUZHEDC
Documented hosts 3
Separate accessory records 10
Host materials Stainless steel and titanium, Zirconium alloy and titanium, Zirconium alloy and brass

JUZHEDC lists three complete Triassic configurations alongside separate frames and plates. Two transaction entries dated September 3, 2025 identify steel and zirconium examples. An October entry specifies steel with blue titanium. The individual launch dates and production quantities remain undocumented.

How the editions were identified

JUZHEDC studio store and TRB Creation product specifications

FAMILY ARCHIVE

Editions & configurations

3 complete-configuration records

Push the Triassic with a thumb and a long slot emerges from beneath the offset cover. Four balls guide the stroke, while a titanium reed gives it a distinct sound.

Steel with blue titaniumBrowse group1 configuration recordsBlue frames run down either side of the pale center plate.
Zirconium with titanium or aged brassBrowse group2 configuration recordsThe two combinations differ in the contrast between their center plate and narrow outer edges.
TRB WIKI VERIFIED SPECIFICATION

Documented points

Layered rectangular body and exposed travel slot

The long slot is visible once the outer layers are offset. Four balls guide the relative movement.

Different ball-plunger pressures change the resistance along the same path.

The titanium reed produces sound and a small vibration during the stroke.

01

How the movement feels

Four balls guide the moving halves, limit travel and reduce direct contact between metal faces. Ball-plunger pressure changes the resistance under the thumb. An internal titanium reed adds audible and tactile feedback. Twelve side slots accept 1.5 × 6 mm luminous tubes.

The long slot is visible once the outer layers are offset. Four balls guide the relative movement.

Layered rectangular body and exposed travel slotEnd slot exposed during travelExterior detail · not to scaleFollow the travelFeel the resistanceListen for the reed

The long slot is visible once the outer layers are offset. Four balls guide the relative movement.

Layered rectangular body and exposed travel slot

  1. The long slot is visible once the outer layers are offset. Four balls guide the relative movement.
  2. Different ball-plunger pressures change the resistance along the same path.
  3. The titanium reed produces sound and a small vibration during the stroke.
02

Identifying the editions

JUZHEDC lists three complete Triassic configurations alongside separate frames and plates. Two transaction entries dated September 3, 2025 identify steel and zirconium examples. An October entry specifies steel with blue titanium. The individual launch dates and production quantities remain undocumented.

Blue frames flank the silver-colored center plate. When the slider is extended, the long slot near the end and the stepped outline become visible.

The center plate has a warm brown-gold tone, with dark metal visible along its notched edges. The studio identifies aged brass, while the TRB option uses the shorter label Zirconium+Brass.

03

Reading an accessory listing

Hide details ▴Show details ▾

The studio offers frames, cover plates, fastening screws and maintenance supplies separately. Its parts list also identifies 1.9 mm POM balls, 1.94 mm steel balls and ball plungers rated at 5, 8 and 10 N.

04

Choosing editions to compare

Compare body material and finish against the individual photographs.

Steel with blue titanium

Blue frames run down either side of the pale center plate.

Zirconium with titanium or aged brass

The two combinations differ in the contrast between their center plate and narrow outer edges.

05

Sources, roadmap clues & scope boundaries

Hide details ▴Show details ▾

Beyond the verified configurations in this guide, the following clues and cross-family mentions are tracked separately:

  • Collector records:A February 2026 resale entry calls one steel-and-titanium specimen polished with a storm-color finish. A studio issue in that finish remains unverified. A January 2026 entry describes a zirconium plate. One reseller reused a blue-edged steel/titanium photograph for its zirconium/titanium option. The illustrated configurations follow the named studio options.
PARTS & PERIPHERALS ARCHIVE

Accessories and anatomy

10 records

The studio offers frames, cover plates, fastening screws and maintenance supplies separately. Its parts list also identifies 1.9 mm POM balls, 1.94 mm steel balls and ball plungers rated at 5, 8 and 10 N.

Select an accessory to open its related host record.

N/DAccessories and component records

Blue titanium intermediate framesACCESSORYBlue titanium intermediate framesBlue titanium surrounds each long central opening. The studio lists the two matching frames as one pair.View related record ↗Natural titanium intermediate framesACCESSORYNatural titanium intermediate framesThe two pale titanium frames have open centers and beveled edges along their outer sides.View related record ↗Zirconium intermediate framesACCESSORYZirconium intermediate framesThese open frames have the same long center aperture as their titanium counterparts and a darker gray surface.View related record ↗Titanium cover platesACCESSORYTitanium cover platesThe solid titanium plates have notches along the long edges and carry the studio mark on the face.View related record ↗Brass cover platesACCESSORYBrass cover platesBoth plates have a warm brass color and three engraved lines. The studio lists the separate plates simply as brass.View related record ↗Zirconium cover platesACCESSORYZirconium cover platesThe narrow, dark gray zirconium plates are solid through the center.View related record ↗Triassic fastening screwsACCESSORYTriassic fastening screwsThe studio photograph identifies M2 × 3 countersunk screws with a star-shaped recess. The low heads are visible on the loose hardware.View related record ↗T6 driverACCESSORYT6 driverThe studio tool option has a red grip and a long shaft with a T6 tip.View related record ↗Locating blocksACCESSORYLocating blocksEach locating block shows four rounded ribs. The studio lists the blocks separately in its parts catalog.View related record ↗Maintenance greaseACCESSORYMaintenance greaseThe studio parts catalog pictures this tube of grease among its maintenance supplies.View related record ↗

Individual records (3 editions)

Stainless Steel and Titanium

[Compare with: Zirconium and Titanium] Blue frames flank the silver-colored center plate. When the slider is extended, the long slot near the end and the stepped outline become visible. How to recognize: Blue frames flank the silver-colored center plate. When the slider is extended, the long slot near the end and the stepped outline become visible. (Source note: Stainless Steel and Titanium).

Production quantity undisclosed
Weight undisclosed for this pairing
Catalog dimensions for the series, 52 × 28 × 14 mm
Stainless steel and titanium
Silver-toned face and blue titanium frames
The studio’s named configuration matches its assigned TRB variant photograph.
Official announcement & image position

JUZHEDC studio store, Triassic complete-slider options · Studio catalog configuration

Official source · JUZHEDC studio store, Triassic complete-slider options
Zirconium and Titanium

[Compare with: Zirconium and Aged Brass] A dark gray center bearing the studio mark sits between two narrow, pale edges. The TRB catalog specifies 97 g for this combination. How to recognize: A dark gray center bearing the studio mark sits between two narrow, pale edges. The TRB catalog specifies 97 g for this combination. (Source note: Zirconium and Titanium).

Production quantity undisclosed
97 g
Catalog dimensions for the series, 52 × 28 × 14 mm
Zirconium alloy and titanium
Dark center with pale edges
The studio’s named configuration matches its assigned TRB variant photograph.
Official announcement & image position

JUZHEDC studio store, Triassic complete-slider options · Studio catalog configuration

Official source · JUZHEDC studio store, Triassic complete-slider options
Zirconium and Aged Brass

[Compare with: Stainless Steel and Titanium] The center plate has a warm brown-gold tone, with dark metal visible along its notched edges. The studio identifies aged brass, while the TRB option uses the shorter label Zirconium+Brass. How to recognize: The center plate has a warm brown-gold tone, with dark metal visible along its notched edges. The studio identifies aged brass, while the TRB option uses the shorter label Zirconium+Brass. (Source note: Zirconium and Aged Brass).

Production quantity undisclosed
Weight undisclosed for this pairing
Catalog dimensions for the series, 52 × 28 × 14 mm
Zirconium alloy and brass
Aged brass
The studio’s named configuration matches its assigned TRB variant photograph.
Official announcement & image position

JUZHEDC studio store, Triassic complete-slider options · Studio catalog configuration

Official source · JUZHEDC studio store, Triassic complete-slider options

Configuration details

DESIGN THROUGH TIME

Edition records

JUZHEDC lists three complete Triassic configurations alongside separate frames and plates. Two transaction entries dated September 3, 2025 identify steel and zirconium examples. An October entry specifies steel with blue titanium. The individual launch dates and production quantities remain undocumented.

  1. Triassic Slider Configuration Matrix3 verified records
    N/DStainless Steel and Titanium
    N/DZirconium and Titanium
    N/DZirconium and Aged Brass
    STAGE 01

    Stainless Steel and Titanium

    Blue frames flank the silver-colored center plate. When the slider is extended, the long slot near the end and the stepped outline become visible.

  2. Zirconium and TitaniumEnlarge this crop ↗
    STAGE 02

    Zirconium and Titanium

    A dark gray center bearing the studio mark sits between two narrow, pale edges. The TRB catalog specifies 97 g for this combination.

  3. Zirconium and Aged BrassEnlarge this crop ↗
    STAGE 03

    Zirconium and Aged Brass

    The center plate has a warm brown-gold tone, with dark metal visible along its notched edges. The studio identifies aged brass, while the TRB option uses the shorter label Zirconium+Brass.

Choose two to compare

Compare any two verified configurations side by side across standardized fields.

⚡ 1-CLICK COMPARE PRESETSSelect any matchup to launch an instant side-by-side specification comparison

Host specifications side by side

The material and run size refer to the host.

Host specifications side by side
Dimension Stainless Steel and Titanium Edition A Zirconium and Aged Brass Edition B
Material Stainless steel and titanium Zirconium alloy and brass
Finish Silver-toned face and blue titanium frames Aged brass
Numbered run Production quantity undisclosed Production quantity undisclosed

REQUEST A CONFIGURATION OR PART

Looking for JUZHEDC Triassic Slider?

Share the edition, material, or accessory you are looking for, and include a reference photo or serial number if available.

Send a sourcing request ↗

Keep exploring

FREQUENTLY ASKED QUESTIONS

Common questions about JUZHEDC Triassic Slider

How much does each configuration weigh?

TRB gives 97 g for zirconium with titanium and dimensions of 52 × 28 × 14 mm for the series. The catalog does not give individual weights for steel/titanium or zirconium/brass.

JUZHEDC studio store and TRB Creation product specifications

How can I tell a frame from a cover plate?

In the studio photographs, the intermediate frame has a long opening through the middle. The solid cover plate carries the JUZHEDC mark. Each type is sold in matching pairs.

JUZHEDC studio store and TRB Creation product specifications

Which tuning parts and tube sizes are documented?

The studio lists 1.9 mm POM balls, 1.94 mm steel balls and 5, 8 and 10 N plungers. TRB specifies twelve slots for 1.5 × 6 mm luminous tubes and cautions against substituting glass pieces.

JUZHEDC studio store and TRB Creation product specifications

OFFICIAL ARCHIVE CITATION

Citing this guide

When referencing the configuration records, mass tiers, or identification rules from this page, use the citation format below.

Source catalogs

TRB Creation, “JUZHEDC Triassic Slider Edition and Mechanism Guide”, TRB EDC Wiki, https://trb-creation.com/pages/wiki-juzhe-triassic (Verified 2026-11-21).

Enlarged image

Compare configurations