View original ↗
View original ↗
BlacktopworksAnchor is a three-leaf bearing spinner by Blacktopworks, with an open body and layered finger-cap texture. The documented choices are 43 g zirconium with heat-blackening and 108 g natural sandblasted tungsten.
Maintained by TRB Creation · Page prepared 2026-10-13 · Based on 2 documented configuration records in this guide
| Brand | Blacktopworks |
|---|---|
| Type | Fidget spinner |
| Feedback | Bearing spin; maker-described resonance |
| First release year | 2024 (documented 7 December launch) |
| Mechanism detail | Three open arms; launch specification R188 |
| Guide scope | Two complete configurations: zirconium and tungsten |
Anchor is a three-leaf bearing spinner by Blacktopworks, with an open body and layered finger-cap texture. The documented choices are 43 g zirconium with heat-blackening and 108 g natural sandblasted tungsten.
Two complete material configurations. Keep model dimensions as shared references and read each announced batch quantity separately.
Names identify documented complete configurations. Material differences and browse groups do not establish official sub-series; components and included items are listed separately.
Table dates refer to the documentation, not necessarily the release. Confirmed release and quantity information appears in each record.
The 43 g zirconium launch configuration has textured heat-blackening and an announced flexible 50-piece batch.
The 43 g zirconium launch configuration has textured heat-blackening and an announced flexible 50-piece batch.
The 108 g tungsten configuration uses fine sandblasting in its natural colour, with an announced flexible 25-piece batch.
The 108 g tungsten configuration uses fine sandblasting in its natural colour, with an announced flexible 25-piece batch.
No matching configuration. Clear the search or check the separate component records below.
The three-arm body turns around its bearing, with the open-arm edges providing contact points. Layered cap texture provides a holding area, and the launch describes an integrated cap-and-screw structure. Resonance is the maker’s description of the spinning sound, not a promise of fixed duration, speed or loudness.
Centre caps provide the holding area
Shows the documented bearing rotation only; it does not represent measured speed, duration, exact internal proportions or separate tungsten part specifications.
Zirconium has textured heat-blackening and a listed complete weight of 43 g. Tungsten uses fine sandblasting in its natural colour and is listed at 108 g. The tungsten notice directs readers to earlier parameters, so dimensions remain model references. The flexible batch counts of 50 and 25 belong to separate announcements and are not a permanent combined family total.
The lighter documented complete configuration.
The heavier documented complete configuration.
The launch describes integrated caps and screws and names the R188 bearing. These are structural facts, rather than evidence of extra caps, spare bearings, tools or storage pieces in the box. Itemised package contents and separate parts sales remain unconfirmed for both configurations. Other products in the photograph are not documented inclusions.
Compare the 43 g zirconium configuration for the lighter listed weight, or the 108 g tungsten configuration for a substantially heavier device. Then compare textured heat-blackening with the natural sandblasted exterior; colour alone should not identify material. Dimensions are not independently measured per configuration, and announcement batch counts do not describe present inventory. Confirm package contents and separately sold parts on their own.
Complete-configuration record
The 43 g zirconium launch configuration has textured heat-blackening and an announced flexible 50-piece batch.
Complete-configuration record
The 108 g tungsten configuration uses fine sandblasting in its natural colour, with an announced flexible 25-piece batch.
A documented first launch and one material update; no claim that every historical finish or media item has been exhaustively reviewed.
The announcement introduces 43 g zirconium, textured heat-blackening and a flexible 50-piece batch.
The update lists 108 g natural sandblasted tungsten and a flexible 25-piece batch.
Two complete material configurations. Keep model dimensions as shared references and read each announced batch quantity separately.
No configurations match. Clear the search to start again.
Share the edition, material or part you are looking for, and include a reference-image link if available. We will clarify your request; availability, condition and price are confirmed separately.
