Steel finishes
Six steel finishes and four patterned editions share the three-layer profile.
An open steel specimen reveals the curved track between its three plates. Two different detent rhythms share each stroke and give the slider its wind-chime sound.
TRB Creation · 2026-11-19
| Studio | KAIS |
|---|---|
| Documented hosts | 18 |
| Parts and anatomy records | 3 |
| Host materials | Stainless steel, Stainless steel, copper, brass and cupronickel, Zirconium and white mother-of-pearl, Green G10 and white mother-of-pearl, Avocado G10 and white mother-of-pearl, Titanium |
KAiS named its first mechanical slider after a Chinese expression for awaiting good news. Four steel finishes launched in July 2024. The October update counted six base finishes, introduced four patterns and revised the tracks. The dragon, Venom, Shanghai and Western Cowboy issues retained the curved three-plate form.
KAiS and ROGUE release notices, SKU photographs from studio-named dealers and identifiable individual specimens.
An open steel specimen reveals the curved track between its three plates. Two different detent rhythms share each stroke and give the slider its wind-chime sound.
No matching configuration. Clear the search or reset filters.
Three curved plates arc past one another under a sideways thumb stroke. Rolling balls and PTFE guides support the movement. Each side carries a 12-detent arc and an 18-detent circular track. Their overlapping rhythms give Lucky Ballad its wind-chime sound.
The three plates fan apart, exposing the middle layer on either side.
The three plates fan apart, exposing the middle layer on either side.
Three curved plates and two tracks
KAiS named its first mechanical slider after a Chinese expression for awaiting good news. Four steel finishes launched in July 2024. The October update counted six base finishes, introduced four patterns and revised the tracks. The dragon, Venom, Shanghai and Western Cowboy issues retained the curved three-plate form.
A fine pale grain runs across the steel face. The July launch and October cumulative list both identify this finish.
One face portrays a cowboy and the other continues the story at the California Hotel. KAiS and ROGUE created the edition with Graced Undead.
Three photographs show the curved guide, the center layer of the dragon collaboration and the reverse relief on Venom.
Compare body material and finish against the individual photographs.
Six steel finishes and four patterned editions share the three-layer profile.
Carp and dragon occupy opposing faces on the inlaid release. A smooth web of zirconium or G10 holds the white shell inlay on Venom.
The Shanghai issue depicts the Bund. The Western Cowboy collaboration tells a story across its two faces.
Beyond the verified configurations in this guide, the following clues and cross-family mentions are tracked separately:
Three photographs show the curved guide, the center layer of the dragon collaboration and the reverse relief on Venom.
Select an accessory to open its related host record.
ANATOMYCurved Guide and Detent RowWith the faces offset, the dark center piece and its row of detents are visible. The launch description identifies an arc of 12 detents and a circular track of 18 per side.View related record ↗
ANATOMYCarp Face and Exposed Middle LayerBeside the inlaid carp face, the curved slot and dark middle layer come into view. KAiS specified the second-batch geometry and spring configuration for this collaboration.View related record ↗
ANATOMYVenom Reverse | Equalizer ReliefBars of unequal length run down the back, opposite the shell inlay. KAiS compared their pattern to an audio equalizer. The image records the exterior relief.View related record ↗
[Compare with: Blackened Stonewash] Stainless steel / Natural pearlescent stonewash. How to recognize: A fine pale grain runs across the steel face. The July launch and October cumulative list both identify this finish. (Source note: Natural Pearl Stonewash).
Studio release and an identified specimen · Single-edition photograph
Official source · Studio release and an identified specimen[Compare with: Fine-Polished Stonewash] Stainless steel / Blackened and stonewashed. How to recognize: Dark gray faces frame the lighter cut edges. In October the studio reported that production of this finish had ended. (Source note: Blackened Stonewash).
Studio release and an identified specimen · Single-edition photograph
Official source · Studio release and an identified specimen[Compare with: Precision Machining Lines] Stainless steel / Fine-polished pearlescent stonewash. How to recognize: Stonewash marks remain visible in the bright surface. Hutouju, a dealer named by KAiS, lists its photograph as polished stonewash. (Source note: Fine-Polished Stonewash).
Studio release and an identified specimen · Single-edition photograph
Official source · Studio release and an identified specimen[Compare with: Weathered Stonewash] Stainless steel / Fine machined face. How to recognize: Machining lines spread a fan of reflected light across the face. The studio lists the underlying metal as stainless steel. (Source note: Precision Machining Lines).
Studio release and an identified specimen · Single-edition photograph
Official source · Studio release and an identified specimen[Compare with: Orange-Peel Texture] Stainless steel / Weathered stonewash. How to recognize: Uneven gray mottling breaks up the flat face. KAiS listed weathered steel alongside natural pearl and machined steel in its second batch. (Source note: Weathered Stonewash).
Studio release and an identified specimen · Single-edition photograph
Official source · Studio release and an identified specimen[Compare with: CNC Ripple] Stainless steel / Orange-peel texture. How to recognize: Small raised irregularities scatter light across the broad face. The October studio tally records all 30 as sold out. (Source note: Orange-Peel Texture).
Studio release and an identified specimen · Single-edition photograph
Official source · Studio release and an identified specimen[Compare with: Superconductor Pattern] Stainless steel / CNC ripple grooves. How to recognize: Closely spaced curved cuts sweep across the face. Of the four special patterns, KAiS specifically identifies Ripple as CNC engraved. (Source note: CNC Ripple).
Studio release and an identified specimen · Single-edition photograph
Official source · Studio release and an identified specimen[Compare with: Damascus Pattern] Stainless steel / Engraved and polished dot lattice. How to recognize: A regular field of dots covers the face. Superconductor is the pattern name on the studio release of these stainless steel hosts. (Source note: Superconductor Pattern).
Studio release and an identified specimen · Single-edition photograph
Official source · Studio release and an identified specimen[Compare with: PLC Circuit Pattern] Stainless steel / Laser engraving and polishing. How to recognize: Loops of varying size flow around the face. KAiS includes this edition in its engraved and polished stainless steel series. (Source note: Damascus Pattern).
Studio release and an identified specimen · Single-edition photograph
Official source · Studio release and an identified specimen[Compare with: Carp into Dragon] Stainless steel / Engraved and polished circuit design. How to recognize: Fine traces turn at right angles between pad-shaped marks. KAiS credited the finishing work for the special series to Dora. (Source note: PLC Circuit Pattern).
Studio release and an identified specimen · Single-edition photograph
Official source · Studio release and an identified specimen[Compare with: Carp into Dragon | Cloud Sea] Stainless steel, copper, brass and cupronickel / Engraving from hand drawings with three inlay metals. How to recognize: A carp occupies one side and a dragon the other. The opened specimen shows a plain inner outer plate. Graced Undead drew and inlaid the designs. (Source note: Carp into Dragon).
Studio release and an identified specimen · Single-edition photograph
Official source · Studio release and an identified specimen[Compare with: Venom | Black Zirconium] Stainless steel, copper, brass and cupronickel / Engraving from hand drawings with three inlay metals. How to recognize: The special issue adds cloud and wave engraving to the inner faces of the outer plates. The factory photograph shows the carp face and engraved inner surface together. (Source note: Carp into Dragon | Cloud Sea).
Studio release and an identified specimen · Single-edition photograph
Official source · Studio release and an identified specimen[Compare with: Venom | Color Zirconium] Zirconium and white mother-of-pearl / Black zirconium web. How to recognize: A black zirconium web divides the white shell inlay into irregular panels. The reverse carries an equalizer motif. (Source note: Venom | Black Zirconium).
Studio release and an identified specimen · Single-edition photograph
Official source · Studio release and an identified specimen[Compare with: Venom | Green G10] Zirconium and white mother-of-pearl / Hand-colored zirconium web. How to recognize: Color travels across the zirconium framework around the white shell. The studio photograph identifies hand coloring and notes that specimens vary. (Source note: Venom | Color Zirconium).
Studio release and an identified specimen · Single-edition photograph
Official source · Studio release and an identified specimen[Compare with: Venom | Avocado G10] Green G10 and white mother-of-pearl / Deep green G10 web. How to recognize: The deeper green frame identifies this version in the studio comparison. Both G10 colors were regular releases without numbered identity cards. (Source note: Venom | Green G10).
Studio release and an identified specimen · Single-edition photograph
Official source · Studio release and an identified specimen[Compare with: Shanghai Bund | Titanium] Avocado G10 and white mother-of-pearl / Paler olive-green G10 web. How to recognize: Paler olive green surrounds the white shell inlay. KAiS released it alongside the green G10 host and gave the same weight for both. (Source note: Venom | Avocado G10).
Studio release and an identified specimen · Single-edition photograph
Official source · Studio release and an identified specimen[Compare with: Western Cowboy | Titanium] Titanium / Colored Bund skyline engraving. How to recognize: The Bund skyline fills one face and Shanghai dialect fills the other. The curved three-layer silhouette identifies Lucky Ballad among the three engraved show models. (Source note: Shanghai Bund | Titanium).
Studio release and an identified specimen · Single-edition photograph
Official source · Studio release and an identified specimen[Compare with: Natural Pearl Stonewash] Titanium / Illustrated engraving and inlay. How to recognize: One face portrays a cowboy and the other continues the story at the California Hotel. KAiS and ROGUE created the edition with Graced Undead. (Source note: Western Cowboy | Titanium).
Studio release and an identified specimen · Single-edition photograph
Official source · Studio release and an identified specimenKAiS named its first mechanical slider after a Chinese expression for awaiting good news. Four steel finishes launched in July 2024. The October update counted six base finishes, introduced four patterns and revised the tracks. The dragon, Venom, Shanghai and Western Cowboy issues retained the curved three-plate form.
A fine pale grain runs across the steel face. The July launch and October cumulative list both identify this finish.
Enlarge this crop ↗Closely spaced curved cuts sweep across the face. Of the four special patterns, KAiS specifically identifies Ripple as CNC engraved.
Enlarge this crop ↗A carp occupies one side and a dragon the other. The opened specimen shows a plain inner outer plate. Graced Undead drew and inlaid the designs.
Enlarge this crop ↗A black zirconium web divides the white shell inlay into irregular panels. The reverse carries an equalizer motif.
Enlarge this crop ↗The Bund skyline fills one face and Shanghai dialect fills the other. The curved three-layer silhouette identifies Lucky Ballad among the three engraved show models.
Enlarge this crop ↗One face portrays a cowboy and the other continues the story at the California Hotel. KAiS and ROGUE created the edition with Graced Undead.
Compare any two verified configurations side by side across standardized fields.
No configurations match. Clear the search to start again.
Share the edition, material, or accessory you are looking for, and include a reference photo or serial number if available.
July gives the first allocation of 350 pieces. October counts each finish cumulatively, including 100 fine-polished pieces compared with 60 in the first batch.
KAiS and ROGUE release notices, SKU photographs from studio-named dealers and identifiable individual specimens.
Both issues have carp and dragon faces in three inlay metals. The 30 Cloud Sea pieces add cloud and wave engraving on the insides of the outer plates.
KAiS and ROGUE release notices, SKU photographs from studio-named dealers and identifiable individual specimens.
Lucky Ballad launched with curved, smooth-edged plates bearing three slots and three dots. KAiS issued Yin Bei separately with radiating ribs shaped like a scallop shell.
KAiS and ROGUE release notices, SKU photographs from studio-named dealers and identifiable individual specimens.